• Korean Chemical Engineering Research
• /
• 제60권3호
• /
• pp.327-333
• /
• 2022

본 연구에서는 고용량 음극 소재로 활용되는 실리콘의 부피팽창을 개선하기 위해 Si/CNT/C 음극 복합소재를 제조하였다. Si/CNT는 표면 개질에 의한 양전하 실리콘과 음전하 CNT의 정전기적 인력에 의해서 제조되었고, 수열합성에 의해서 구형의 Si/CNT/C 복합소재를 합성하였다. 전극 제조는 poly(vinylidene fluoride) (PVDF), polyacrylic acid (PAA) 및 styrene butadiene rubber (SBR) 바인더를 사용하였고, 1.0 M LiPF₆ (EC:DMC:EMC = 1:1:1 vol%) 전해액 및 fluoroethylene carbonate (FEC)가 첨가된 전해액을 사용하여 전지를 제조하였다. Si/CNT/C 음극 복합소재는 SEM, EDS, XRD 및 TGA를 사용하여 물리적 특성을 분석하였으며, 사이클, 율속, dQ/dV 및 임피던스 테스트를 통해 리튬이온 배터리의 성능을 조사하였다. 활물질로 Si/CNT/C 복합소재, 바인더로 PAA/SBR, 전해액으로 FEC 10 wt%가 첨가된 EC:DMC:EMC 용매를 사용했을 경우, 50 사이클 후 914 mAh/g의 높은 가역 용량과 83%의 용량 유지율 및 2 C/0.1 C에서 70%의 속도 특성을 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1331-1336
• /
• 2009

Photolysis of (2-hydroxyethoxyphenyl)pentamethyldisilane 2 in benzene provides a novel intramolecular cyclization photoproduct 9 which was probably formed from the intramolecular reaction to form a seven-membered ring in silatriene intermediate 7 and then the photochemical disrotatory ring closure of 1,3-butadiene moiety to cyclobutene. Irradiation of 2 in methanol afforded photoproducts 5 and 6 which were formed by the nucleophilic attack of methanol to $\beta$ or $\alpha$ silicon atom in pentamethyldisilanyl group of the photoexcited state of 2. Compounds 10 and 11 were also formed by the same way as in the formation of the photoproducts 5 and 6 in the photolysis of (2-allyloxyethoxyphenyl)pentamethyldisilane 3 in methanol solvent. Photoreaction of (2-acetoxyethoxyphenyl) pentamethyldisilane 4 in methanol gave a photoproduct 12 which was formed via the elimination of dimethylsilylene species in the photoexcited state of 4.

• 전기화학회지
• /
• 제20권2호
• /
• pp.27-33
• /
• 2017

매우 좋은 에너지 저장장치인 리튬이차전지의 안전성은 전기화학반응이 일어나는 "양극/분리막(전해질)/음극"의 계에서 리튬이온전지의 분리막의 물리적 충격, 고온에 따른 손상에 기인하는 바가 크며, 특히, 폭발사고에서 분리막 손상에 의한 내부단락이 큰 영향을 끼친다. 고분자로 구성된 분리막의 열 안정성을 높이기 위해 세라믹이 얇게 코팅된 세라믹코팅 분리막이 최근 사용되고 있다. 폴리에틸렌계 분리막 위에 다양한 크기(IL = 488.5 nm, I = 538.7 nm, S = 810.3 nm, D = 1533.3 nm)의 $Al_2O_3$ 입자와 styrene-butadiene rubber(SBR) / carboxymethyl cellulose(CMC) 바인더를 섞어 만든 슬러리를 코팅하여 열 안정성을 측정한 후, 이를 분리막으로 하는 삼성분계 양극과 리튬메탈 음극의 코인 셀을 제작하여, 전기화학적 특성 변화를 관찰하였다.

• Environmental Analysis Health and Toxicology
• /
• 제13권1_2호
• /
• pp.27-31
• /
• 1998

Motor vehicle exhaust is the major cause to the air contamination in Seoul. It includes many toxic chemicals to human health such as aidehyde, PAHs, benzene, xylene, toluene, benzo[a]pyrene, nickel, arsenic and cadmium in gasoline exhaust and formaldehyde, PAHs, 1,3-butadiene, benzene and particulate matter in diesel exhaust. Some chemicals out of them are classified as a human carcinogen. Many large diesel vehicles such as buses and trucks are drivened frequently in Seoul so that the air in Seoul is seriously contaminated by diesel exhaust, especially particulate matter. The amounts of particulate matter from large diesel vehicles may be estimated to be more than 50% of small dust in Seoul. The particles of particulate matter are coated with many toxic chemicals and some of these are considered as a human carcinogen. The cancer risk has to be throughly managed because the population density of Seoul is very high. Government should list hazardous air pollutants in Seoul, assess the exposure of people to toxic pollutants, especially carcinogens and manage human health risk.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.45-52
• /
• 1972

As a series of the studies of EPDM-Polymer blends, the experiments are concentracted to the investigation of the physical properties of the EPDM-NBR blends. The results are shown as follows; 1. As EPDM addition ratio is increased, the physical properties such as resistance to ozone and aging have also improved, on the other hand, elongation and abrasion resistance decreased. 2. Tear strength is less influenced by blending and character after aging exhibited the same result. 3. Tensile strength decreased with increase in EPDM contents, especially the ratio of EPDM/NBR are 50/50 and 75/25.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.46-50
• /
• 2020

Material extrusion (ME)-type 3D printing is the most popular among the 3D printing processes. In this study, the cross-section morphologies of ME-type 3D printing manufactured specimens were observed with respect to the thermal properties of the material. The cross-section morphology of a specimen is related to the deposition strength, and the outside profile of the cross-section is related to the surface roughness. The filaments used in this study, with different thermal conductivities, were the acrylonitrile-butadiene-styrene (ABS), the high impact polystyrene (HIPS), the glycol-modified polyethylene terephthalate (PETG), and the polylactic acid (PLA). The cross-sections and the surfaces of the 3D manufactured specimens were examined. In ME-type 3D printing, the filaments are extruded through a nozzle and they form a layer. These layers rapidly solidify and as a result, they become a product. The thermal conductivity of the material influences the cooling and solidification of the layers, and subsequently the cross-section morphology and the surface roughness.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.37-42
• /
• 2012

This study was carried in order to manufacture the high quality coated paper. High quality includes not only physical and optical properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with conventional styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. Small amount of acrylic emulsion addition increased water retention, but further addition decreased it. Acrylic-emulsion addition improved paper gloss, brightness and whiteness, but decreased PPS and opacity slightly. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No. 1 and 2 emulsion showed the opposite result. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion. These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.

• 공업화학
• /
• 제17권1호
• /
• pp.82-86
• /
• 2006

일반 휘발유 및 LPG용 자동차와 각종 유량계기 등에 사용되는 국산 부표는 $150^{\circ}C$ 이상의 엔진오일에 장시간 띄워 놓으면 연료의 침투로 인하여 중량과 부피의 변화로 외관이 팽창하거나 조직이 이완된다. 본 연구에서는 고온에서도 중량 및 부피의 변화(3% 이내)가 적으며 내유성 및 내열성을 갖는 고온 엔진 오일용 발포부표 제조에 관한 연구를 수행하였다. 부표의 기본 재료인 NBR을 HNBR로 대체하여 제조한 TROF II-3은 고온($150^{\circ}C$)의 오일에 100 h 동안 띄워 놓은 경우에 2.90%의 중량 변화율과 2.56%의 부피 변화율을 나타내었다. 또한, 무게와 부피 변화는 NBR을 사용한 경우(TROF I-3)보다 $150^{\circ}C$에서 각각 10.81%, 3.08%로 더 작은 변화율을 나타내었다. TROF II-3은 고온의 오일에서 중량과 부피에 대한 변화가 작고 제품의 외관과 비중도 일정하게 유지되므로 고온의 엔진오일용 부표로서 적합한 것으로 판단된다.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.201-208
• /
• 2013

본 연구는 황과 가교 촉진제의 함량이 달리 적용된 acrylonitrile styrene-butadiene rubber (AN-SBR)/silica 컴파운드가 타이어 트레드 컴파운드의 특성에 미치는 영향에 대해 연구하였다. 실험 결과, 가교제 및 가교촉진제의 함량이 증가할수록 가교 반응성이 증대되어 가교속도 및 컴파운드의 가교도가 상승하였다. 또한 내마모 특성 뿐만 아니라 경도, 모듈러스와 같은 컴파운드의 기계적 특성은 높은 가교도에 기인하여 향상되었다. 동적 점탄 특성에서는 가교도의 증가와 함께 유리전이온도 ($T_g$)가 상승하여 $0^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 향상되었고, $60^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 감소되었다. 초기 가교 속도 ($t_1$)는 $60^{\circ}C$의 tan ${\delta}$ 값과 선형적인 관계를 나타내었다. 이는 가교제의 증량으로 초기 가교 속도 ($t_1$)가 빨라져 조기에 가교가 시작됨으로써 filler network 의 발달을 억제시킨 결과에 따른 것으로 판단된다. 이러한 결과는 AFM (atomic force microscopy)을 통하여 열처리된 컴파운드의 표면 관찰에서도 확인할 수 있었다. 따라서, 빠른 초기 가황 반응에 기인한 실리카의 re-agglomeration 감소는 $60^{\circ}C$에서의 tan ${\delta}$를 결정하는 매우 중요한 변수임을 알 수 있다.