• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.63-71
• /
• 2000

A new type of second-order digital peaking filters for professional-quality digital audio system is proposed whose frequency response can be elaborately controlled throughout the composite structure of a standard band-pass filter and a 0-dB bypass gain. The proposed method for designing the peaking filter uses the Q-compensation technique to prevent the Q-distortion caused by the variation of the gain factor and is reduced into a compact form which is proper to the real-time implementation. Methods are examined for computing its coefficients, which are exact and very straightforward to compute with small amount of the system resources.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.289-294
• /
• 2008

A 77 GHz 3-stage low noise amplifier (LNA) employing one common source and two cascode stages is developed using $0.13{\mu}m$ CMOS process. To compensate for the low gain which is caused by lossy silicon substrate and parasitic element of CMOS transistor, positive feedback technique using parasitic inductance of bypass capacitor is adopted to cascode stages. The developed LNA shows gain of 7.2 dB, Sl1 of -16.5 dB and S22 of -19.8 dB at 77 GHz. The return loss bandwidth of LNA is 71.6 to 80.9 GHz (12%). The die size is as small as $0.7mm\times0.8mm$ by using bias line as inter-stage matching networks. This LNA shows possibility of 77 GHz automotive RADAR system using $0.13{\mu}m$ CMOS process, which has advantage in cost compared to sub-100 nm CMOS process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.100-105
• /
• 2010

A multi-band low noise amplifier (LNA) is designed in 90 nm RF CMOS process for 3GPP LTE (3rd Generation Partner Project Long Term Evolution) applications. The designed multi-band LNA covers the eight frequency bands between 1.85 and 2.8 GHz. A tunable input matching circuit is realized by adopting a switched capacitor array at the LNA input stage for providing optimum performances across the wide operating band. Current steering technique is adopted for the gain control in three steps. The performances of the LNA are verified through post-layout simulations (PLS). The LNA consumes 17 mA at 1.2 V supply voltage. It shows a power gain of 26 at the normal gain mode, and provides much lower gains of 0 and -6.7 in the bypass-I and -II modes, respectively. It achieves a noise figure of 1.78 dB and a IIP3 of -12.8 dBm over the entire band.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.269-279
• /
• 1990

A 98 d feeding trial carried out to study liveweight change and rumen metabolites in heifers weighing initially 275 kg and given either untreated or ammoniated rice straw supplemented with 0, 0.4, 0.8 or 1.2 kg protein meal consisting of cottonseed meal (60). All 32 animals received 0.6 kg rice polishings/hd/d and had continuous access to molasses/urea block-licks containing 15% urea. The effects on growth rates of treatment of the straw with ammonia and of supplementation with bypass protein were additive. The heifers fed ammoniated straw grew 267 g/hd/d (p<0.001) faster and consumed 11% (p<0.05) more straw than the heifers on untreated straw. The mean growth response to bypass protein was 0.37 kg gain/kg protein meal supplied. Supplementation with protein meal tended (p=0.06) to depress intake of straw, but straw intakes of the unsupplemented groups were high. Small changes in the composition of the block-licks that were fed throughout the feeding trial led to changes in block intake and in intake of untreated straw. Increasing quantities of protein meal fed were associated with linear increase in concentrations of ammonia (p<0.05) and in molar percentages of iso-butyrate (p<0.01), iso-valerate (p<0.01) and valerate (p<0.01) in the rumen fluid of the heifers on a basal diet of untreated straw. However, in the rumen fluid of the heifers given ammoniated straw, the levels of these metabolities were not affected by the quantity of protein meal given.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.14-21
• /
• 2009

In this paper, a Ka-band 10 W power amplifier module with seven power MMIC bare dies is designed and fabricated using MIC technology which combines multiple MMIC chips on a thin film substrate. Modified Wilkinson power dividers/combiners and CBFGCPW-Microstrip transitions for suppressing resonance and reducing connection loss are utilized for high-gain and high-power millimeter wave modules. A new TTL pulse timing control scheme is proposed to improve output power degradation due to large bypass capacitors in the gate bias circuit. Pulse-mode operation time is extended more than 200 nsec and output power increase of 0.62 W is achieved by applying the proposed scheme to the Ka-band 10 W power amplifier module operating in the pulsed condition of 10 kHz and $5\;{\mu}sec$. The implemented power amplifier module shows a power gain of 59.5 dB and an output power of 11.89 W.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.312-318
• /
• 2016

This paper presents a 2-6 GHz GaN HEMT power amplifier monolithic microwave integrated circuit (MMIC) with bridged-T all-pass filters and output-reactance-compensation shorted stubs using the $0.25{\mu}m$ GaN HEMT foundry process that is developed by WIN Semiconductors, Inc. The bridged-T filter is modified to mitigate the bandwidth degradation of impedance matching due to the inherent channel resistance of the transistor, and the shorted stub with a bypass capacitor minimizes the output reactance of the transistor to ease wideband load impedance matching for maximum output power. The fabricated power amplifier MMIC shows a flat linear gain of 20 dB or more, an average output power of 40.1 dBm and a power-added efficiency of 19-26 % in 2 to 6 GHz, which is very useful in applications such as communication jammers and electronic warfare systems.