• Title/Summary/Keyword: 0/1 constraint

Search Result 170, Processing Time 0.035 seconds

Design Optimization of QTP-UAV Prop-Rotor Blade Using ModelCenter (ModelCenter를 이용한 QTP-UAV 프롭로터 블레이드 형상 최적설계)

  • Kang, Hee Jung
    • Journal of Aerospace System Engineering
    • /
    • v.11 no.4
    • /
    • pp.36-43
    • /
    • 2017
  • Blade design optimization of QTP-UAV prop-rotor was conducted using ModelCenter(R). Performance efficiency of the blade in hover and forward flight were adopted as the multi-objective function. Required power and pitch link force applied to constraint in each flight mode and limited lower than the value of the baseline blade. Design variables of root chord length of the blade, taper ratio, twist slope, twist angle at 0.5R of the blade, anhedral angle, parabolic coefficient of a tip shape and location of airfoil were used to generate the blade planform. CAMRAD-II, the comprehensive analysis program of rotorcraft, was used for performance analysis of prop-rotor blade in design process. Performance of the optimized blade improved 1.6% of figure of merit in hover and 13.6% of propulsive efficiency in forward flight. Pitch link force also reduced approximately 30% less than that of the baseline blade.

Comparison and evaluation of volumetric modulated arc therapy and intensity modulated radiation therapy plans for postoperative radiation therapy of prostate cancer patient using a rectal balloon (직장풍선을 삽입한 전립선암 환자의 수술 후 방사선 치료 시 용적변조와 세기변조방사선치료계획 비교 평가)

  • Jung, hae youn;Seok, jin yong;Hong, joo wan;Chang, nam jun;Choi, byeong don;Park, jin hong
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.27 no.1
    • /
    • pp.45-52
    • /
    • 2015
  • Purpose : The dose distribution of organ at risk (OAR) and normal tissue is affected by treatment technique in postoperative radiation therapy for prostate cancer. The aim of this study was to compare dose distribution characteristic and to evaluate treatment efficiency by devising VMAT plans according to applying differed number of arc and IMRT plan for postoperative patient of prostate cancer radiation therapy using a rectal balloon. Materials and Methods : Ten patients who received postoperative prostate radiation therapy in our hospital were compared. CT images of patients who inserted rectal balloon were acquired with 3 mm thickness and 10 MV energy of HD120MLC equipped Truebeam STx (Varian, Palo Alto, USA) was applied by using Eclipse (Version 11.0, Varian, Palo Alto, USA). 1 Arc, 2 Arc VMAT plans and 7-field IMRT plan were devised for each patient and same values were applied for dose volume constraint and plan normalization. To evaluate these plans, PTV coverage, conformity index (CI) and homogeneity index (HI) were compared and $R_{50%}$ was calculated to assess low dose spillage as per treatment plan. $D_{25%}$ of rectum and bladder Dmean were compared on OAR. And to evaluate the treatment efficiency, total monitor units(MU) and delivery time were considered. Each assessed result was analyzed by average value of 10 patients. Additionally, portal dosimetry was carried out for accuracy verification of beam delivery. Results : There was no significant difference on PTV coverage and HI among 3 plans. Especially CI and $R_{50%}$ on 7F-IMRT were the highest as 1.230, 3.991 respectively(p=0.00). Rectum $D_{25%}$ was similar between 1A-VMAT and 2A-VMAT. But approximately 7% higher value was observed on 7F-IMRT compare to the others(p=0.02) and bladder Dmean were similar among the all plan(P>0.05). Total MU were 494.7, 479.7, 757.9 respectively(P=0.00) for 1A-VMAT, 2A-VMAT, 7F-IMRT and at the most on 7F-IMRT. The delivery time were 65.2sec, 133.1sec, 145.5sec respectively(p=0.00). The obvious shortest time was observed on 1A-VMAT. All plans indicated over 99.5%(p=0.00) of gamma pass rate (2 mm, 2%) in portal dosimetry quality assurance. Conclusion : As a result of study, postoperative prostate cancer radiation therapy for patient using a rectal balloon, there was no significant difference of PTV coverage but 1A-VMAT and 2A-VMAT were more efficient for dose reduction of normal tissue and OARs. Between VMAT plans. $R_{50%}$ and MU were little lower in 2A-VMAT but 1A-VMAT has the shortest delivery time. So it is regarded to be an effective plan and it can reduce intra-fractional motion of patient also.

  • PDF

Development of Red Pepper Dryer -Simulation and Optimization- (고추 건조기(乾燥機)의 개발(開發)에 관한 연구(硏究) -시뮬레이션 및 최적화-)

  • Keum, D.H.;Choi, C.H.;Kim, S.Y.
    • Journal of Biosystems Engineering
    • /
    • v.16 no.3
    • /
    • pp.248-262
    • /
    • 1991
  • Simulation model was developed to analyze drying process for tray type red pepper dryer and validated by experiments. This model could predict satisfactorily temperatures and moisture contents of red pepper and temperatures of drying air during drying. Optimize algorithm was developed to search control valiables (drying air temperature, air recycle ratio and air flow rate) of red pepper dryer based on a criterion of minimizing energy consumption under the constraint conditions that statisfied carotenoid retension of at least 210mg per 100g dry matter, the moisture content of bottom layer of 15% (d.b) and drying time of less than 35 hours. Step changes in drying air temperature and air recycle ratio were considered in the optimization. In single step in control variables, the difference of the moisture content between top layer and bottom layer was great and more fan power was required. As the drying trays were exchanged when the moisture content of bottom layer reached to 100% (d.b), fifty percent of energy was saved and the difference of moisture content was little. In double step changes in control variables, optimal conditions were found by changing the step when the moisture content of bottom layer reached to 100% (d.b) (about 19.8 hours from starting drying). Optimum air flow rate was $18.1cmm/m^2$. Optimum drying air temperature and air recycle ratio in the first step was $55.8^{\circ}C$ and 0.80, and in the second step $65.6^{\circ}C$ and 0.88, respectively. In triple step changes in control variables, the optimal conditions were found by changing the steps when the moisture content of bottom layer reached to 250% (d.b) and 150% (d.b). Optimal air temperatures were $66.2^{\circ}C$, $58.4^{\circ}C$ and $66.9^{\circ}C$, and optimal air recycle ratios were 0.778, 0.785, 0.862 at each step, respectively. Optimal air flow rate was $18.9cmm/m^2$. The best operating mode was triple step mode considering energy consumption, drying time, fan power, and quality of dried red pepper. When the triple step mode was used to dry the red pepper, the energy consumption was about 16.5%~57.2% less than that of the single step mode and the drying time was 6.6 hours shorter than that of the double step mode.

  • PDF

A Study on Marketing of Cultured Laver Products (양식해태의 유통에 관한 조사 연구)

  • 유충열
    • The Journal of Fisheries Business Administration
    • /
    • v.4 no.1_2
    • /
    • pp.19-57
    • /
    • 1973
  • Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ =18, 907.7455+15435.9364 t (r=0.89) where the origin t=0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r=0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets <3, 947.1674+0.005 $L_{g}$ >) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

  • PDF

Design of Synchronous 256-bit OTP Memory (동기식 256-bit OTP 메모리 설계)

  • Li, Long-Zhen;Kim, Tae-Hoon;Shim, Oe-Yong;Park, Mu-Hun;Ha, Pan-Bong;Kim, Young-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.7
    • /
    • pp.1227-1234
    • /
    • 2008
  • In this paper is designed a 256-bit synchronous OTP(one-time programmable) memory required in application fields such as automobile appliance power ICs, display ICs, and CMOS image sensors. A 256-bit synchronous memory cell consists of NMOS capacitor as antifuse and access transistor without a high-voltage blocking transistor. A gate bias voltage circuit for the additional blocking transistor is removed since logic supply voltage VDD(=1.5V) and external program voltage VPPE(=5.5V) are used instead of conventional three supply voltages. And loading current of cell to be programmed increases according to RON(on resistance) of the antifuse and process variation in case of the voltage driving without current constraint in programming. Therefore, there is a problem that program voltage can be increased relatively due to resistive voltage drop on supply voltage VPP. And so loading current can be made to flow constantly by using the current driving method instead of the voltage driving counterpart in programming. Therefore, program voltage VPP can be lowered from 5.9V to 5.5V when measurement is done on the manufactured wafer. And the sens amplifier circuit is simplified by using the sens amplifier of clocked inverter type instead of the conventional current sent amplifier. The synchronous OTP of 256 bits is designed with Magnachip $0.13{\mu}m$ CMOS process. The layout area if $298.4{\times}314{\mu}m2$.

Performance Improvement of the battening Effect of the new Asymmetric Turbo Codes (새로운 비대칭 구조를 갖는 터보부호의 Flattening Effect의 성능향상에 관한 연구)

  • 정대호;정성태;김환용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.6A
    • /
    • pp.533-539
    • /
    • 2002
  • It is well known the fact that turbo lodes has better performance as the number of iteration and the interleaver size increases in the AWGN channel environment. However, as the number of iteration and the interleaver size are increased, it is required much delay and computation for iterative decoding, and caused the flattening effect phenomenon which is very litter BER performance improvement at the arbitrary SNR. In this paper, We proposed the new asymmetric turbo codes, which consist of parallel concatenated turbo codes that use mixed types of component codes with different not only constraint length but also generate polynomial and analyzed its BER performance for log-MAP decoding algorithm with frame size of 128, 256, 512 and 1024 bits, and coding rate of 1/3. As a results of simulation, proposed asymmetric turbo codes verify that its BER performance is superior to conventional symmetric turbo codes. It can be also observed that the flattening effect phenomenon is very reduced by applying the proposed asymmetric turbo codes. It gains respectively 1.7dB ~2.5dB and 2.0dB~2.5dB SNR improvements in the case of short frame(128, 256) and large frame(512, 1024) size for the BER $10_{-4}$>/TEX> region.

Analysis of a CubeSat Magnetic Cleanliness for the Space Science Mission (우주과학임무를 위한 큐브위성 자기장 청결도 분석)

  • Jo, Hye Jeong;Jin, Ho;Park, Hyeonhu;Kim, Khan-Hyuk;Jang, Yunho;Jo, Woohyun
    • Journal of Space Technology and Applications
    • /
    • v.2 no.1
    • /
    • pp.41-51
    • /
    • 2022
  • CubeSat is a satellite platform that is widely used not only for earth observation but also for space exploration. CubeSat is also used in magnetic field investigation missions to observe space physics phenomena with various shape configurations of magnetometer instrument unit. In case of magnetic field measurement, the magnetometer instrument should be far away from the satellite body to minimize the magnetic disturbances from satellites. But the accommodation setting of the magnetometer instrument is limited due to the volume constraint of small satellites like a CubeSat. In this paper, we investigated that the magnetic field interference generated by the cube satellite was analyzed how much it can affect the reliability of magnetic field measurement. For this analysis, we used a reaction wheel and Torque rods which have relatively high-power consumption as major noise sources. The magnetic dipole moment of these parts was derived by the data sheet of the manufacturer. We have been confirmed that the effect of the residual moment of the magnetic torque located in the middle of the 3U cube satellite can reach 36,000 nT from the outermost end of the body of the CubeSat in a space without an external magnetic field. In the case of accurate magnetic field measurements of less than 1 nT, we found that the magnetometer should be at least 0.6 m away from the CubeSat body. We expect that this analysis method will be an important role of a magnetic cleanliness analysis when designing a CubeSat to carry out a magnetic field measurement.

Perceptual discrimination of wh-scopes in Gyeongsang Korean (경상 방언 의문문 작용역의 지각 구분)

  • Yun, Weonhee
    • Phonetics and Speech Sciences
    • /
    • v.14 no.2
    • /
    • pp.1-10
    • /
    • 2022
  • A wh-phrase positioned in an embedded clause can be interpreted as having a matrix scope if the sentence is produced with proper prosodic structures such as the wh-intonation. In a previous experiment, a sentence with a wh-phrase in an embedded clause was given to 40 speakers of Gyeongsang Korean. A script containing the sentence was provided to induce a matrix scope interpretation for the wh-phrase. These 40 utterances were prepared as stimuli for a perception test to verify whether the wh-phrases in the stimuli were perceived as having matrix scopes. Each utterance was played thrice to 24 subjects. The results showed that more than half of the 72 responses indicated a preference for an embedded scope rather than a matrix scope in 20 of the utterances. A multiple linear regression analysis showed that the matrix scope responses were best predicted by the magnitude of the pitch prominence in a prosodic word consisting of an embedded verb and a complementizer. The pitch prominence was calculated by subtracting the fundamental frequency (F0) at the right edge of the prosodic word from the peak F0 in the same prosodic word. The smaller the magnitude, the more matrix responses there were. These results suggest that the categorical perception of wh-scopes is based on the magnitude of pitch prominence.

Failure characteristics of combined coal-rock with different interfacial angles

  • Zhao, Tong-Bin;Guo, Wei-Yao;Lu, Cai-Ping;Zhao, Guang-Ming
    • Geomechanics and Engineering
    • /
    • v.11 no.3
    • /
    • pp.345-359
    • /
    • 2016
  • In order to investigate the influence of the interfacial angel on failure characteristics and mechanism of combined coal-rock mass, 35 uniaxial/biaxial compressive simulation tests with 5 different interfacial angels of combined coal-rock samples were conducted by PFC2D software. The following conclusions are drawn: (1) The compressive strength and cohesion decrease with the increase of interfacial angle, which is defined as the angle between structure plane and the exterior normal of maximum principal plane, while the changes of elastic modulus and internal friction angle are not obvious; (2) The impact energy index $K_E$ decreases with the increase of interfacial angle, and the slip failure of the interface can be predicted based on whether the number of acoustic emission (AE) hits has multiple peaks or not; (3) There are four typical failure patterns for combined coal-rock samples including I (V-shaped shear failure of coal), II (single-fracture shear failure of coal), III (shear failure of rock and coal), and IV (slip rupture of interface); and (4) A positive correlation between interfacial angle and interface effect is shown obviously, and the interfacial angle can be divided into weak-influencing scope ($0-15^{\circ}$), moderate-influencing scope ($15-45^{\circ}$), and strong-influencing scope (> $45^{\circ}$), respectively. However, the confining pressure has a certain constraint effect on the interface effect.

An Algorithm for the Singly Linearly Constrained Concave Minimization Problem with Upper Convergent Bounded Variables (상한 융합 변수를 갖는 단선형제약 오목함수 최소화 문제의 해법)

  • Oh, Se-Ho
    • Journal of the Korea Convergence Society
    • /
    • v.7 no.5
    • /
    • pp.213-219
    • /
    • 2016
  • This paper presents a branch-and-bound algorithm for solving the concave minimization problem with upper bounded variables whose single constraint is linear. The algorithm uses simplex as partition element. Because the convex envelope which most tightly underestimates the concave function on the simplex is uniquely determined by solving the related linear equations. Every branching process generates two subsimplices one lower dimensional than the candidate simplex by adding 0 and upper bound constraints. Subsequently the feasible points are partitioned into two sets. During the bounding process, the linear programming problems defined over subsimplices are minimized to calculate the lower bound and to update the incumbent. Consequently the simplices which do certainly not contain the global minimum are excluded from consideration. The major advantage of the algorithm is that the subproblems are defined on the one less dimensinal space. It means that the amount of work required for the subproblem decreases whenever the branching occurs. Our approach can be applied to solving the concave minimization problems under knapsack type constraints.