• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.820-827
• /
• 2012

This study was performed to evaluate the effect of yam (Diocorea japonica) extract by methanol on sausage quality during cold storage. Yam extracts were prepared by 70% methanol and concentrated using rotary evaporation. The total phenol contents of the extracts were 123.03 mg/g. 1,1'-diphenyl-2-picrylhydrazyl (DPPH) scavenging activity and super oxide dismutase (SOD) activity of the extracts were increased with dose dependently. Nitrite scavenging activity was also increased with the increase of concentration of yam extracts; in particular, 70 ${\mu}g/mL$ of the extracts showed 57.12% of nitrite scavenging activity. Sausages containing yam extracts showed lower pH than that of the control. In color, the lightness ($L^*$) of sausages with 1.0% of the yam extracts was lower than that of the control. Redness and yellowness of the sausages with 1.0% of the yam extracts were higher than those of the control. Thiobarbituric acid reactive substances (TBARS) value of the sausage with 1.0% of the extracts was lower than those of the control on days 9 and 12. However, the hardness of the sausage was increased with an increase in yam extracts. From these results, the yam extracts showed high antioxidant activity; moreover, it also retards the lipid oxidation of the sausages during cold storage. The yam extracts could be used as additives to prevent lipid oxidation of the sausage. Further study should be conducted in order to identify the optimum concentration of the extracts in meat products.

• Journal of Chest Surgery
• /
• v.29 no.6
• /
• pp.593-598
• /
• 1996

The large number of past investigation on extended myocardial protection clearly indicates that cold potassium cardioplegia and topical cooling have limited capabilities. Accordingly, more recent experimen- tal approaches have focused on the modalities of reperfusion and their implication on postischemic myo- cardial recovery. Oxygen may play a crucial role in the development of ischemic and reperfusion injury. Reactive oxygen radicals may be produced during ischemia or reperfusion after incomplete reduction of molecular oxygen or from other pathway and then induce fatal injury of the heart. The important obser- vation of oxygen-induced myocardial damage during reperfusion has led to the concept of applying oxy- gen free radical scavengers. So, this study is on dietary vitamin C supplementation as antioxidant in rats to determine whether or not they have a higher tolerance against cardiac ischemia-reperf'usion injury under Langendorff system. Male or female Sprague-Dawley rats (190-33Og) were randomly separated into two groups. Group A was not treated(n=10). Group B received vitamin C supplement (n=10). Experiment was performed 24 hours after vitamin C 200mg fed orally as injectable ascorbic acid. There were significant differences in contractile parameters between control and vitamin C-treated group. The RLVP (r te of post/preischemic left ventricular pressure) and Rdp/dt (rate of post/preischemic dp/dt) were significant statistically between two groups (p<0.05). But, RHR (rate of post/preischemic heart rate), time to first beat and sta'utilization were not significant. In conclusion, pretreatment with the antioxidant, ascorbic acid, was found to preserve left ventricular contractile function. But the precise mechanism of action of ascorbic acid has not as yet been determined, so further study will be required.

• Reproductive and Developmental Biology
• /
• v.31 no.3
• /
• pp.161-167
• /
• 2007

In this study, we constructed and tested retrovirus vectors designed to express the human thrombopoietin gene under the control of the tetracycline-inducible promoters. To increase the hTPO gene expression at him-on state, WPRE sequence was also introduced into retrovirus vector at downstream region of either the hTPO gene or the sequence encoding reverse tetracycline-controlled transactivator (rtTA). Primary culture cells (PFF, porcine fetal fibroblast; CEF, chicken embryonic fibroblast) infected with the recombinant retrovirus were cultured in the medium supplemented with or without doxycycline for 48hr, and induction efficiency was measured by comparing the hTPO gene expression level using RT-PCR, western blot and ELISA. Higher hPTO expression and tighter expression control were observed from the vector in which the WPRE sequence was placed at downstream of the hTPO (in CEF) or rtTA(in PFF) gene. This resulting tetracycline inducible vector system may be helpful in solving serious physiological disturbance problems which have been a major obstacle in successful production of transgenic animals.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.289-300
• /
• 2009

The Geodo mine area, had been developed for Fe and Cu ores since 1963 and abandoned in recent decades, is located in the central part of the Taebaeksan mineralized district. This area comprises of the Jangsan, Myobong, Pungchon, Hwajeol, Dongjeom, and Dumugol Formations in ascending stratigraphic order. These Formations were intruded by the Cretaceous Eopyeong granitoids that appears to produce the Geodo skarn. Their compositions are relatively oxidized quartz monzodiorite to granodiorite (magnetite series, $Fe_2O_3/FeO=0.3{\sim}1.1$). Mineralizations related skarn deposit occur in the Myobong, Pungchon, and Hwajeol Formations. The proximal skarn is zoned from andraditic garnet ($Ad_{44-95}Gr_{1-53}$) predominant adjacent to the Eopyeong granitoids to diopsidic pyroxene ($Hd_{10-100}Di_{0-89}$) predominant away from the one. The differential proportion of garnet and pyroxene is generated by water/rock ratio and their source, such as magmatic and meteoric water. This is useful tool for assessment the overall oxidation state of the entire skarn system. Gold occurs in proximal red to brownish garnet skarn, and genetically associated with Bi- and Te-bearing minerals. Skarn deposit developed in the Geodo mine area is considered as oxidized Au skarn category, based on chemical composition of the Eopyeong granitoids, zonation of skarn, and gold occurrences. Garnet-rich skarn zone will be the main target for exploration of gold in the study area. However, it is needed to the detailed survey on vertical zonation of this area as well as lateral zonation. The result of this survey would provide an important basis for the exploration of the skarn Au deposit in the Geodo mine area.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.101-107
• /
• 2002

The essential oils isolated from leaves, flowers, stems, and fruits of Vitex rotundifolia by steam distillation and extraction (SDE) method were analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). A total of 76 components detected by GC, 42 components were identified positively by GC-MS and GC co-injection with authentic standards, and 34 components were identified tentatively by mass spectral data only. They included 16 monoterpene hydrocarbons, 30 oxygenated hydrocarbons, 10 sesquiterpene hydrocarbons, 8 oxygenated sesquiterpenes, 3 diterpenes, and 9 miscellaneous components. The major components in the oil from the leaves were ${\alpha}-pinene$ (30.25%), 1,8-cineole (19.89%), sabinene (9.56%), ${\alpha}-terpineol$ (7.94%), ${\beta}-pinene$ (5.69%), and terpinen-4-ol (2.37%), and those in the flower oil were ${\alpha}-pinene$ (25.47%), 1,8-cineole (7.69%), manoyl oxide (6.21%), ${\beta}-pinene$ (4.20%), ${\alpha}-te.pineol$ (3.76%), and sabinene (2.78%). The major components in the oil from the stems were ${\alpha}-pinene$ (13.24%), ${\alpha}-terpineol$ (10.64%), 1,8-cineole (4.40%), manoyl oxide (4.02%), ${\beta}-pinene$ (2.39%), and terpinen-4-ol (2.21%) while those in the oil from the fruits were ${\alpha}-pinene$ (20.24%), 1,8-cineole (11.47%), ${\beta}P-pinene$ (9.79%), ${\alpha}-terpineol$ (7.08%), sabinene (3.68%), and limonene (2.77%). The percentage composition of monoterpenes in the oils from the leaves and the fruits were higher than in those from the flowers and the stems, whereas the oil from the flowers and the stems were characterized by a large content of sesquiterpenes, diterpenes and other unknown high molecular weight components.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.435-443
• /
• 2017

The Hanae deposit is located within the Cretaceous Gyeongsang Basin. The Cu-bearing hydrothermal quartz vein formed by narrow open-space filling along fracture in the sedimentary rocks as Jindong Formation. The Hanae Cu-bearing hydrothermal deposit shows a paragenetic sequence of pyrrhotite-pyrite $\rightarrow$ pyrite-chalcopyrite-sphalerite(${\pm}$Bi-bearing tellurides) $\rightarrow$ Ag-bearing telluride mineralization $\rightarrow$ secondary mineralization. Fluid inclusion data indicate that the Hanae Cu-bearing hydrothermal mineralization occurred from dominantly aqueous fluids at temperatures of $400^{\circ}C-200^{\circ}C$. Equilibrium thermodynamic interpretation of the mineral paragenesis and assemblages combined with fluid inclusion data indicate that early main Cu-bearing ore mineralization in the vein starts at about $350^{\circ}C$ which corresponds to sulfur fugacity from about $10^{-9.2}$ to $10^{-8.7}bar$ with oxygen fugacity of about $10^{-32.1}$ to $10^{-29.8}bar$. Late main Cu-bearing ore mineralization in the vein occurs at about $250^{\circ}C$ which corresponds to sulfur fugacity from about $10^{-13.5}$ to $10^{-11.7}bar$ with oxygen fugacity of about $10^{-38.4}$ to $10^{-35.2}bar$. The late Ag-bearing telluride mineralization in the Hanae hydrothermal system occurs at about $200^{\circ}C$ which corresponds to minium Tellirium fugacity value of about $10^{-18}bar$ with sulfur fugacity of about $10^{-14.0}$ to $10^{-10.9}bar$.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.283-288
• /
• 2011

This study was conducted to study the environment effects on live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score, which are the carcass traits of Hanwoo, based on the estimates and all the possible regression for the selection of variable and significance test for 231,382 heads that underwent the carcass measurements. The average and standard deviation for the live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score were 654.79${\pm}$91.61 kg, 362.30${\pm}$67.15 kg, 59.52${\pm}$0.03%, 81.79${\pm}$12.21 $cm^2$, 11.39${\pm}$5.40 mm, 4.38${\pm}$2.29, respectively. The live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score for cow were 532.79${\pm}$78.38 kg, 313.40${\pm}$44.90 kg, 56.50${\pm}$0.03%, 75.24${\pm}$10.69 $cm^2$, 11.82${\pm}$5.10 mm, 4.30${\pm}$2.06, respectively, while for bull were 619.74${\pm}$93.27 kg, 376.89${\pm}$48.62 kg, 58.61${\pm}$0.02%, 85.61${\pm}$10.46 $cm^2$, 5.64${\pm}$2.71 mm, 1.41${\pm}$0.83, respectively, and for steer were 681.78${\pm}$70.72 kg, 415.23${\pm}$49.43 kg, 60.19${\pm}$0.02%, 88.29${\pm}$10.27 $cm^2$, 12.71${\pm}$5.23 mm, 5.42${\pm}$1.99, respectively. In the environmental variables selection based on the variables selection method, the examination by carcass traits suggested that the most appropriate model could be determined when five variables were selected for the live weight, carcass weight, dressing percentage, eye muscle area, and four variables for backfat thickness, and marbling score. When they were considered at a time altogether based on multiple traits, it was deemed to be desirable to insert all five variables into the variables for analysis. In addition, high significance was found by carcass traits.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.303-310
• /
• 1996

The objective of this study was to examine the effect of embryos development following IVF of in vitro-matured porcine oocytes treated with epidermal growth factor (EGF). When cumulus-enclosed oocytes were incubated in TCM 199 medium supplemented with (1) control group, (2) 10 ng/ml EGF, (3) 10${\mu}g$ml FSH and 10% FBS, or (4) 10 ng/ml EGF, 10 ${\mu}g$/ml FSH, and 10% FBS for 42 hr, the late developmental rates on NCSU (0.4% BSA) medium after fertilization were higher in (3) and (4) groups (13.4, 18.3%) than in (2) group (5.2%, p < 0.005), but (2) group is significantly higher than the development to blastocyst of oocytes of (1) group (1.2%). Also, when the cell number of total, ICM, and TE of those blastocysts at 6 day produced in vitro was investigated by double staining (PI and bisbenzimide), total cell number of (4) group (58.80${\pm}$ 11.90) was higher than that of (2) and (3) groups (42.17${\pm}$9.97, 49.07${\pm}$9.77, P < 0.05). ICM cell number of blastocysts of (4) group (11.69${\pm}$5.56) was higher than that of (2) and (3) groups (5.00${\pm}$4.24, 6.77${\pm}$4. 92, P < 0.05). Furthermore, the proportion of ICM in (4) group (19.0${\pm}$1.6) was higher than that in (2) and (3) groups (11.1${\pm}$3.0, 12. 7${\pm}$2.1). These results suggested that in vitromatured porcine oocytes treated with EGF alone can be developed to blastocyst, but high proportion on the development to blastocyst and number of total cell and ICM in blastocyst can be obtained when supplemented with additional FSH and FBS.

• Journal of Life Science
• /
• v.22 no.11
• /
• pp.1477-1486
• /
• 2012

This study was performed to determine the effect of onion peel extract using 70% ethanol and 95% ethanol on its anti-oxidation activity, small intestine length, and intestinal villi of high-fat fed mice. Five percent of each onion peel extract using 70% and 95% ethanol showed significant decrease of E. coli and Listeria monocytogenes. Total phenolic contents of onion peel extracts using 70% and 95% ethanol were $166.89{\pm}0.03$ mg/g and $160.89{\pm}0.13$ mg/g, respectively. In anti-oxidation activity, DPPH radical scavenging activity and SOD-like activity of onion peel extracts were higher at 100 ug/ml concentration. The obese mice were fed high-fat diets supplemented by 1, 3, and 5% of the onion peel extracts using 70% and 95% ethanol for 4 weeks. Body weight, feed intake, feed efficiency, small intestine weight, length, villi's length, and number of bacteria in intestine were determined. Body weight of mice fed 5% of onion extracts using both 70% and 95% ethanol was significantly lower than that of control (p<0.05). However, feed intake was increased in mice fed 5% of onion extracts at both fermented ethanol levels. Small intestine weight and length of mice showed no significant change with supplementation of the onion peel extracts. However, length of small intestine villi was significantly longer than that of control. Total bacteria counts of Cl. Perfringenes and E. coli in small intestine of the mice were significantly reduced by supplementation of 5% of onion extract using ethanol, while lactic acid bacteria were increased. These results suggest that 5% of onion peel extracts using ethanol at either 70% or 95% concentration have potential to be used as an additive for body weight control and enhanced gut health; however, more research on its effectiveness is needed.