• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.3
• /
• pp.144-151
• /
• 2009

Photocatalytic degradation of methylene blue (MB) in aqueous solution was investigated using $TiO_2$ coated on various acid modified activated carbon fiber (ACF). The ACFs/$TiO_2$ composites were prepared from titanium n-butoxide (TNB) as titanium precursor and various acid modified ACFs. The prepared samples are heat treated at 973 K. Then the ACF/$TiO_2$ composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX). Moreover, photocatalytic degradation of MB by the ACF/$TiO_2$ composites was determined under UV irradiation. The results shows that the photocatalytic activity of ACF/$TiO_2$ composites ($AT1{\sim}AT4$) prepared with TNB and various acid modified ACF was much better than that of ACF/$TiO_2$ composite (AT) prepared with TNB and non-acid modified ACF, and the effects improved with order of sample AT3 > AT4 > AT1 > AT2.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.340-345
• /
• 2003

B $i_2$ $O_3$-Ti $O_2$ composite dielectric ceramics have been prepared by a conventional solid state ceramic route. The composite ceramics were prepared with starting materials of different origin and the microwave dielectric properties were investigated. The sintered ceramics were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis, Raman and microwave methods. Structural and microstructural analyses identified two separate phases: Ti $O_2$(rutile) and B $i_2$ $Ti_4$0$_{11}$. The separate grains of titania and bismuth titanate were distributed uniformly in the ceramic matrix. The composition 0.88Ti $O_2$-0.12B $i_2$ $Ti_4$ $O_{11}$ was found to have a Q$\times$f of 9300 GHz (measured at a frequency of 3.9 GHz), a temperature coefficient of frequency, $\tau$$_{cf}$ near zero and a high relative permittivity, $\varepsilon$r of 83. The microwave dielectric properties were measured down to 20$^{\circ}$K K. The quality factor increased on cooling the ceramic samples.les.

• Journal of the Korean Ceramic Society
• /
• v.47 no.3
• /
• pp.210-215
• /
• 2010

In this study, an expanded graphite-titanium oxide composite is developed from expanded graphite (EG) and titanium n-butoxide (TNB). EG is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature. TNB is used as the titanium source. The performances of the prepared EG-$TiO_2$ composite are characterized by BET surface area measurements, scan electron microscope (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). The catalytic activities of the EG-$TiO_2$ composite are investigated by analysis of the degradation of methylene blue (MB) in aqueous solution under irradiation of UV light. Compared with the pristine $TiO_2$ and activity carbon-$TiO_2$ (AC-$TiO_2$) composite, the EG-$TiO_2$ composite shows very high efficiency against MB solution, and the EG could improve the photocatalytic effect of $TiO_2$ in the MB degradation reaction under the irradiation of UV light.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.118.2-118.2
• /
• 2016

몇몇의 박테리아들은 바이오필름을 형성하여 그들 스스로를 보호한다. 하지만 바이오필름으로 인해 악취와 질병 등의 문제가 많이 발생되고 있기 때문에 바이오필름을 형성하는 박테리아의 성장을 효율적으로 억제하기 위해 은 나노, 구리 나노입자들이 포함된 다양한 나노스케일의 재료들에 대한 연구가 활발히 진행되어오고 있다. 이들 연구의 주된 목표는 체내에서 독성은 나타내지 않으면서 항균성을 증가시키는 것에 있다. 특히, 구형으로 이루어진 나노입자와 높은 종횡비를 가지는 탄소나노튜브와 같이 차원이 다른 나노물질들의 복합체들은 세포독성을 최소화하면서 특정 박테리아에 대한 항균성을 향상시킬지도 모른다. 이번 연구에서는, 산 처리된 탄소나노튜브에 화학적인 방법을 이용하여 구리 이온을 각각 환원시켜 구리 나노-탄소나노튜브 복합체를 합성하였다. 이들 복합체는 transmission electron microscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy 를 이용하여 특성이 분석되었고 Methylobacterium spp., Sphingomonas spp. 와 E. coli 에 대하여 항균성이 평가되었다. 추가적으로 구리 나노-탄소나노튜브 복합체는 human fibroblast cells 에 대하여 세포독성이 평가되었고 제작된 마이크로칩 안에 형성된 바이오필름의 성장억제효과가 평가되었다. 결과적으로, 구리 나노-탄소나노튜브 복합체에서 바이오필름을 형성하는 Methylobacterium spp. 에 대하여 특이적으로 항균성을 나타냈으며 바이오필름이 형성된 마이크로칩에서 바이오필름을 제거 하는 것이 확인되었다.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.747-756
• /
• 2012

The purpose of this study was to investigate adsorption characteristics of organo-clays for removal of p-xylene. As part of efforts to examine the adsorption capacities of some organo-clays for p-xylene, batch isotherm tests were carried out. Organo-clay minerals were synthesized under hydrothermal conditions using Na-montmorillonite as host clay and dimethyldioctadecylammonium (DMDA) bromide and benzyldimethyldodecylammonium (BDDA) chloride as organic surfactants, respectively. All synthetic organo-clay minerals were characterized by powder x-ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDX). The modification using dimethyldioctadecylammonium (DMDA) bromide showed the higher adsorption ability for p-xylene than benzyldimethyldodecylammonium (BDDA) chloride. On the other hand, the maximum adsorption capacity, $Q_{max}$ of DMDA modified montmorillonite estimated by Langmuir model was 27.0 mg/g, which was the higher value than other organo-clays.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.555-561
• /
• 2009

Expanded graphite (EG) is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature, with titanium n-butoxide (TNB) used as titanium source by a sol-gel method to prepare EG-TiO$_2$ composite. The performances of the prepared EG-TiO$_2$ composite are characterized by BET surface area measurement, scanning electron microscopy (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). To compare the photocatalytic activities of the EG-TiO$_2$ composite, three kinds of dye solutions, methylene blue (MB), methylene orange (MO) and rhodamine B (RhB), and two kinds of light source, UV light and visible light (VL), are used. Comparing the results, it can be clearly seen that the degradation of all of the dye solutions under irradiation by UV light is much better than that under irradiation by visible light, and the decomposition of MB solution was better than that of both of MO and RhB solution.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.282-287
• /
• 2011

ACF and $WO_3$ modified $TiO_2$ composites (ACF/$WO_3$/$TiO_2$) were prepared using a sol-gel method. The composites were characterized by Brunauer.Emmett.Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis and scanning electron microscope (SEM) analysis. A methyl orange (MO) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of the MO was determined using UV/Vis spectrophotometry. An increase in photocatalytic activity was observed and attributed to an increase of the photo-absorption effect by the $WO_3$ and the cooperative effect of the ACF.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.320-323
• /
• 2014

Ga-doped $LiFePO_4$ cathode materials were synthesized using a hydrothermal method. The microstructural characteristics and electrochemical performances were systematically investigated using field emission scanning electron microscopy, high-resolution X-ray diffraction, energy dispersive X-ray spectroscopy, charge-discharge cycling, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the as-prepared samples, $LiFe_{0.96}Ga_{0.04}PO_4$ demonstrates the best electrochemical properties in terms of discharge capacity, electrochemical reversibility, and cycling performance with an initial discharge capacity of $125mAh\;g^{-1}$ and high lithium ion diffusion coefficient of $1.38{\times}10^{-14}cm^2s^{-1}$ (whereas for $LiFePO_4$, these were $113mAh\;g^{-1}$ and $8.09{\times}10^{-15}cm^2\;s^{-1}$, respectively). The improved electrochemical performance can be attributed to the facilitation of Li+ ion effective diffusion induced by $Ga^{3+}$ substitution.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.3
• /
• pp.115-140
• /
• 2010

Great concerns about atmospheric aerosols are attributed to their multiple roles to atmospheric processes. For example, atmospheric aerosols influence global climate, directly by scattering or absorbing solar radiations and indirectly by serving as cloud condensation nuclei. They also have a significant impact on human health and visibility. Many of these effects depend on the size and composition of atmospheric aerosols, and thus detailed information on the physicochemical properties and the distribution of airborne particles is critical to accurately predict their impact on the Earth's climate as well as human health. A single particle analysis technique, named low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA) that can determine the concentration of low-Z elements such as carbon, nitrogen and oxygen in a microscopic volume has been developed. The capability of quantitative analysis of low-Z elements in individual particle allows the characterization of especially important atmospheric particles such as sulfates, nitrates, ammonium, and carbonaceous particles. Furthermore, the diversity and the complicated heterogeneity of atmospheric particles in chemical compositions can be investigated in detail. In this review, the development and methodology of low-Z particle EPMA for the analysis of atmospheric aerosols are introduced. Also, its typical applications for the characterization of various atmospheric particles, i.e., on the chemical compositions, morphologies, the size segregated distributions, and the origins of Asian dust, urban aerosols, indoor aerosols in underground subway station, and Arctic aerosols, are illustrated.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.3
• /
• pp.176-183
• /
• 2017

Although it is well known that rain plays an important role in capturing air pollutants, its quantitative evaluation has not been done enough. In this study, the effect of raindrop size on pollutant scavenging was investigated by clarifying the chemical nature of individual size-resolved raindrops and their residual particles. Raindrops as a function of their size were collected using the raindrop collector devised by our oneself in previous study (Ma et al., 2000) during high atmospheric loading for $PM_{2.5}$. Elemental analyses of solid residues and individual residual particles in raindrops were subsequently analyzed by Particle Induced X-ray Emission (PIXE) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray Analysis (EDX), respectively. The raindrop number concentration ($m^{-2}h^{-1}$) tended to drastically decrease as the drop size goes up. Particle scavenging rate, $R_{sca.}$ (%), based on the actual measurement values were 38.7, 69.5, and 80.8% for the particles with 0.3-0.5, 0.5-1.0, and $1.0-2.0{\mu}m$ diameter, respectively. S, Ca, Si, and Al ranked relatively high concentration in raindrops, especially small ones. Most of the element showed a continuous decrease in concentration with increasing raindrop diameter. The source profile by factor analysis for the components of residual particles indicated that the rainfall plays a valuable role in scavenging natural as well as artificial particles from the dirty atmosphere.