• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.119-126
• /
• 1987

This study was conducted to elucidate the most appropriate method to obtain auxotrophic mutants from Valsa ceratosperma, the causal fungus of apple canker, which may be used as a gene marker in detecting the transfer of the factors of avirulent strains to virulent strains. Among the 3 kinds of synthetic media tested, each have two formula for minimal and complete, the medium which has been used in study of Endothia parasitica (E. P medium) was turned out to be most appropriate for the growth of V. ceratosperma. A medium for single colony formation from pycnidiospore of this fungus was developed by adding 0.5% L - sorbose to the E. P minimal medium. The period of incubation in dark for preventing the photoreactivation after U. V irradiation was estimated as about 60hrs at which most of the spores become binucleate. Largest number of putative auxotrophs were obtained at about 50second of irradiation to the spores smeared on the medium for single colony formation, at which the survival rate of spores was 5 to 6 percent. With these method developed in this experiment, 161 isolates of putative auxotrophs were detected among which the nutrient requirement for 10 isolates were determined. Five out of 10 mutants were still virulent to apple tree and all but one could not sporulate.

• The Korean Society of Law and Medicine
• /
• v.11 no.1
• /
• pp.331-393
• /
• 2010

Psychiatrists who treat violent or potentially violent patients may be sue for failure to control aggressive outpatients and for the discharge of violent inpatients. Psychiatrists may be sued for failing to protect society from the violent acts of their patients if it was reasonable for the psychiatrists to have known or should have known about the patient's violent tendencies and if the psychiatrists could have done something that could have safeguarded in public. The courts of a number of jurisdictions have imposed a duty to protect the potential victims of a third party on persons or institutions with a special relationship to that party. In the landmark case of Tarasoff v Regents of University of California, the California Supreme Court held that the special relationship between a psychotherapist and a patient imposes on the therapist a duty to act reasonably to protect the foreseeable victims of the patient. Under Tarasoff, when a therapist has determined, or under applicable professional standards should determine, that a patient poses a serious threat of violence to another, he incurs an obligation to use reasonable care to protect the intended victim against such danger. In addition to a Tarasoff type of action based on a duty to warn or protect foreseeable victims of psychiatric outpatients, courts have also imposed liability on mental health care providers based on their custody of patients known to have violent propensities. The legal duty in such a case has been stated to be that where the course of treatment of a mental patient involves an exercise of "control" over him by a physician who knows or should know that the patient is likely to cause bodily harm to others, an independent duty arises from that relationship and falls on the physician to exercise that control with such reasonable care as to prevent harm to others at the hands of the patient. After going through a period of transition, from McIntosh, Thompson and Brady case, finally, the narrow rule of requiring a specific or foreseeable threat of violence against a specific or identifiable victim is the standard threshold or trigger element in the majority of states. Judgements on these kinds of cases are not enough yet in Korea, so that it may be too early to try find principles in these cases, however it is hardly wrong to read the same reasons of Tarasoff in the judgements of Korea district courts. To specific, whether a psychiatric institute was liable for violent behavior toward others depends upon the patients conditions, circumstances and the extent of the danger the patients poses to others; in short, the foreseeability of a specific or identifiable victim. In this context if a patient exhibit strong violent behavior toward others, constant observation should be required. Negligence has been found not exist, however, when a patient abruptly and unexpectedly attack others or unidentifiable victim. And the standard of conduct that is required to meet the obligation of "due care" is based on what the "reasonable practitioner" would do in like circumstances. The standard is not one of excellence or superior practice; it only requires that the physician exercise that degree of skill and care that would be expected of the average qualified practitioner practicing under like circumstances. All these principles have been established in cases of the U.S.A and Japan. In this article you can find the reasons which you can use for psychotherapist's liability for failure to protect third person in Korea as practitioner.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.132-150
• /
• 2022

Designated as a national intangible cultural asset, the fish weir is a traditional fishing method and was a leading fishing tool in Korean coastal fishery. As the littoral sea area fishing vessel fishery developed since the 1970s, traditional fishing methods including fish weirs began to decline. The fish weir has been passed down in the form of tools such as fish weirs, stone weirs, and bamboo weirs. In Namhae-gun and Sacheon City in Gyeongsangnam-do, anchovies are caught using bamboo weirs. A basic bamboo weir consists of a fish trap(balgong), a space where fish gather together, and a V- or U-shaped wooden fence(halgaji) that helps fish come inside the fish trap. Its fishing method is to catch fish that have come to the coast during high tide alongside those are stuck inside fish traps(balgong) with nets or scoop nets. This paper examined the process of passing down traditional fishing methods through a comparative analysis of the bamboo weir structures and fishing methods in the Namhae and Sacheon regions. First, the historical process of assembling the current bamboo weir structure was analyzed. The bamboo weir, a fishing tool, appears to have combined the features of past weirs and fish weirs based on the Jijok Strait and Samcheonpo Strait. Next, this paper examined the structure and fishing method of the two types of bamboo weirs made with a circular or square fish trap(balgong) where fish gather. Through this analysis, this study examined the lives of fishermen who have adapted to their natural environment and actively utilized obtainable resources(materials), and then changed the traditional fishing method of bamboo weirs and developed them into an appropriate technology. Lastly, a new value attributed to anchovies caught using bamboo weirs was analyzed. This new value extracted from better bamboo weir anchovies works as a mechanism to uphold the tradition of anchovy-catching bamboo-weir fishing, which produces a smaller amount of anchovies compared to other methods of anchovy fishing. In this way, bamboo weir fishing has been passed down as a result of its differentiated aspect of producing better anchovies than those produced with other fishing methods, as well as the historical aspect of it being a traditional fishing method.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.127-134
• /
• 2008

Potential economic impact of a hypothetical severe accident at a nuclear power plant(Uljin units 3/4) was estimated by applying the Delphi method, which is based on the expert judgements and opinions, in the process of quantifying uncertain factors. For the purpose of this study, it is assumed that the radioactive plume directs the inland direction. Since the economic risk can be divided into direct costs and indirect effects and more uncertainties are involved in the latter, the direct costs were estimated first and the indirect effects were then estimated by applying a weighting factor to the direct cost. The Delphi method however subjects to risk of distortion or discrimination of variables because of the human behavior pattern. A mathematical approach based on the Bayesian inferences was employed for data processing to improve the Delphi results. For this task, a model for data processing was developed. One-dimensional Monte Carlo Analysis was applied to get a distribution of values of the weighting factor. The mean and median values of the weighting factor for the indirect effects appeared to be 2.59 and 2.08, respectively. These values are higher than the value suggested by OECD/NEA, 1.25. Some factors such as small territory and public attitude sensitive to radiation could affect the judgement of panel. Then the parameters of the model for estimating the direct costs were classified as U- and V-types, and two-dimensional Monte Carlo analysis was applied to quantify the overall economic risk. The resulting median of the overall economic risk was about 3.9% of the gross domestic products(GDP) of Korea in 2006. When the cost of electricity loss, the highest direct cost, was not taken into account, the overall economic risk was reduced to 2.2% of GDP. This assessment can be used as a reference for justifying the radiological emergency planning and preparedness.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.28-35
• /
• 2006

Statistical models of shape variability based on active shape models (ASMs) have been successfully utilized to perform segmentation and recognition tasks in two-dimensional (2D) images. Three-dimensional (3D) model-based approaches are more promising than 2D approaches since they can bring in more realistic shape constraints for recognizing and delineating the object boundary. For 3D model-based approaches, however, building the 3D shape model from a training set of segmented instances of an object is a major challenge and currently it remains an open problem in building the 3D shape model, one essential step is to generate a point distribution model (PDM). Corresponding landmarks must be selected in all1 training shapes for generating PDM, and manual determination of landmark correspondences is very time-consuming, tedious, and error-prone. In this paper, we propose a novel automatic method for generating 3D statistical shape models. Given a set of training 3D shapes, we generate a 3D model by 1) building the mean shape fro]n the distance transform of the training shapes, 2) utilizing a tetrahedron method for automatically selecting landmarks on the mean shape, and 3) subsequently propagating these landmarks to each training shape via a distance labeling method. In this paper, we investigate the accuracy and compactness of the 3D model for the human liver built from 50 segmented individual CT data sets. The proposed method is very general without such assumptions and can be applied to other data sets.

• 모자간호학회지
• /
• v.4 no.1
• /
• pp.41-51
• /
• 1994

The purposes of this study were to identify responses of nursing students following clinical maternity nursing practice, to develop data of further effective clinical maternity nursing practice, to understand nursing students perceive the natural maturation process toward pregnancy delivery and puerperal process, to help the nursing students achieve personality growth and development through clinical maternity nursing practice. The subjects were 35 senior nursing students from the Department of Nursing Science of Chung-Ang University. The data were collected from the 1st semester (Feb.22$\sim$June 9) to the 2nd semester(Aug.23$\sim$Nov.10), 1993 through self-reporting using an open ended questionnaire about perception and feelings regarding the normal delivery process. The data analysis used descriptive method. Results of the study were as follows : 1. Following clinical practice in maternity nursing, the responses of the nursing students were collected included both positive and negative aspects. The positive responses were classified in to four categories and each category included subgroups. One group, labelled as $\ulcorner$The birth of noble life$\lrcorner$ had a subgroup, (I felt the mystery and wonder of life), another group, $\ulcorner$After delivery, comfort and satisfaction$\lrcorner$ with the subgroup (I can bear to see the comfort and relief beyond pain) (C/S is better than vaginal delivery) (Very easy), the 3rd group, $\ulcorner$ I realized family friendship and support$\lrcorner$ with subgroup (Honorable, Magnificient) (I thank my parents ) (It's good to looking at my husband's support), and the 4th group, $\ulcorner$The birth of a healthy baby$\lrcorner$, with its subgroup, (baby looks pretty and healthy). 2. The negative responses were classified in eight categories and each category included subgroups. One group labelled as $\ulcorner$Fear$\lrcorner$, had subgroups of (Terrible, Horrible) (Shock) (Dread), another group, $\ulcorner$Tension$\lrcorner$, and its subgroup, (I became tense about stories heard before clinical practice), the 3rd group, $\ulcorner$surprise$\lrcorner$ and its subgroup (I was surprised at the delivery process), the 4th group, $\ulcorner$Power lessness$\lrcorner$ and its subgroup, (I watched the labor pain impatiently), the 5th group $\ulcorner$Apathy$\lrcorner$ ; and its subgroup, (I didn't feel the empathy for the labor pain of the pregnant women), the 6th group, $\ulcorner$Disgust$\lrcorner$ and its subgroup, (Disgust, Embarrassed), the 7th group, $\ulcorner$Inevitable destiny$\lrcorner$ and its subgroups (necessity of self-sacrifice and difficulty) (I accepted it as a women's destiny) (I can't do it), the last group, $\ulcorner$There seems to be trouble$\lrcorner$ and its subgroup, (It seems to have been a little too hard for mother and baby). Suggestions for further studies are as follows : 1. Nursing students should receive intensive education about $\ulcorner$The birth of noble life$\lrcorner$ $\ulcorner$After delivery, comfort and satisfaction$\lrcorner$ $\ulcorner$I realized family friendship and support$\lrcorner$ $\ulcorner$The birth of a healthy baby$\lrcorner$, so that a more positive attitude can be developed before clinical maternity nursing. 2. Nursing students should be given an orientation which is reality based and related clinical maternity nursing (using for A.V. Materials), so that they will not feel they tension, of the negative categories. 3. Nursing students should be received articles on Pain Relief Method, so that they will be prepared activie and positive in the clinical practice, and therefore they will not feel the powerlessness, of the negative categories. 4. F/U for responses of nursing students should be checked following clinical maternity nursing to evaluate the effects of the instruction.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.1
• /
• pp.4-23
• /
• 2015

In the Buddhist paintings of the four devas, there is a change in the paper material of V aisravana(多聞天) in the early Joseon Dynasty. Until Goryeo Dynasty, Damuncheonwang, who holds a tower(塔) on the right side of Buddha was changed to the form which holds a mandolin(琵琶) in the early Joseon Dynasty. This change was first checked in Byeonsangdo in the Yuan period "The Avatamska Sutra(大方廣佛華嚴經, 1330~1336)", however the actual paper material change in the Buddhist painting is found first as a mural at the Tibetan temples, Cheolbangsa(哲蚌寺), Odunsa(吳屯寺), Baekgeosa(白居寺), which showed the change of tower which Vaisravaṇa held into mongoose. In Joseon Dynasty, also, new distribution of the four devas appeared first, which showed the change of paper material in the first floor roof-stones of Wongaksaji sipcheung seoktap, . However, the position of the four devas which held a tower and a mandolin consistently appear in the Buddhist paintings in the early Joseon Dynasty by mixing on the left and the right. This means the possibility that the paper material and the position of the four devas might be flexible in the early Joseon Dynasty. Just like reflecting this, painting image of the four devas in illustration of "saddharma-pundari-ka-$s{\bar{u}}tra$(Ming 1432, National Museum of Korea)" and illustration of "Jebulsejonyeorae-bosaljonjamyeongching-gagok(제불세존여래 보살존자명칭가곡, 1417)" has opposite position from each other. Therefore, the phenomenon in the Buddhist paintings of the early Joseon had a transitional characteristic which did not secure the fixed form of painting image by illustration of two copies where paper materials of the four devas were different, which characteristic can be said to be the characteristic of art in the transitional period.