• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1203-1214
• /
• 1989

본 연구에서는 화이버각도, 경계조건 및 하중형태의 변화에 따라 적층 복합재료원통 셸 구조물의 수치예를 제시하고, NASTRAN수치결과 및 기존 문헌들과 비교하여 구하여진 결과의 타당성을 입증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.337-341
• /
• 1997

The purpare of this research is to develope a FEM program for analyzing solidification processes of axisymmetic casting, considering phase changes and the contact between the metal and mold. Temperture recovery method is employed for considering the phase changes releasing the latent heat. A gap element is employed for modeling the interface between the model and metal in finding deformed shapes. In order to verify the developed program, an axisymmetric aluminum casting processes is simulated. Temperature distribution, phase front position, and shrinkaga and porosity creation are compared with measurement, FIDAP results, and ANSYS results, and good agreements are examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.395-396
• /
• 2009

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.106-112
• /
• 1993

This paper presents the optimum design of reinforced concrete conical shell which is fixed at the base and free at the top. The calculation of stresses is done using the SMAP(Segmented Matrix Analysis Package)program which uses the simple finite element method of analysis. The objective function contains the ratios of the unit cost of reinforcements and formwork to that of concrete. To Simplify the optimization procedure, the final optimum design of conical shell is obtained by combining the result of each element. The results are presented and discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.191-192
• /
• 2009

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.111-114
• /
• 2001

A new, simple method to determine the die shape using a streamline in extrusion is presented. This method assumes that a billet deforms naturally to minimize the energy input for the given process condition. Then, an optimal die shape can be determined along a streamline. Extrusion operations with two types of materials, strain-hardening material and strain-rate hardening material, are examined using this method. Predictions with the proposed method are compared with those by the previous optimizing model to show its efficiency.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.107-113
• /
• 1995

To investigate the behavior of platic deformation inaxisymmetric hot extrusion through square dies, the physical modelling with the plasticine as a model material is carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using experimetal grid distortion is introduced to anlayze the plastic flow, strain rate and strain distribution.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.79-82
• /
• 2000

A new simple method to determined the die shape using a streamline in extrusion is presented. This method assumes that a billet deforms naturally to minimize the energy input for the given process condition. Then an optimal die shape can be determined along a streamline. Extrusion operations with two types of materials strain-hardening material and strain-rate hardening material are examined using this method. Prediction with the proposed method are compared with those by the previous optimizing model to show its efficiency.

• Journal of the Korean Vacuum Society
• /
• v.3 no.4
• /
• pp.457-465
• /
• 1994

유도결합 플라즈마의 해석식으로 양극성 확산, 정상상태를 가정한 확산식, 열평형식과 변위전류 를 무시한 맥스웰 식을 사용하였다. 해석기법으로는 유한 차분법과 적분법을 축대칭 2차원(R, Z)모델에 적용하였다. 유도 결합 플라즈마장치의 RF 전력, 압력, 석영창 두께, 차폐부 높이에 따른 전자온도, 전자 밀도, 등가 정항 등가 인덕턴스 효율 결합계수 K, Q-factor의 변화를 구하였다. 특히 등가정항은 진공챔 버, 차폐부 및 코일의 손실저항을 고려하여 구하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1348-1358
• /
• 1989

We analyzed electrostatic lens with axi-symmetic configurations using the analytic equation for a single apertured lens. The developed computer code afforded to estimate ion optical properties such as ion trajectories, aberrations and ion beam diameters, and was found to have advantages of a shorter calculation time. The calculated ion optical properties for several types of electrostatic lens were in good agreement with Burghard's ones and it was seem that 20% reduction of ion beam diameter could be obtained by the change of aperture diameters.