• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.343-345
• /
• 2014

플래시 메모리의 인기가 증가하면서 스토리지 시스템의 변화를 가져왔다. 플래시 메모리 기반의 SSD(Solid State Disk)는 기존의 HDD(Hard Disk Drive)를 대체할 매체로 주목을 받고 있으며 HDD에 비해 훨씬 더 높은 대역폭, 랜덤 접근 성능 및 충격에 강한 장점들을 갖는다. 그러나 플래시 메모리는 HDD와 달리 덮어쓰기(In-Place update)가 불가능 하기 때문에, 데이터를 업데이트 하기 위해서는 해당영역을 지운 후 업데이트를 해야 하는 단점이 있다. 본 논문에서는 캐시 안에서의 거의 접근하지 않을 블락과 캐시로 들어가는 것을 막기 위한 기법을 제시한다. 이것은 캐시의 오염을 막고 더 오랜 기간 동안 캐시 안에서 인기 있는 블락 들을 유지하고 높은 히트율로 연결될 것이다. 또한 캐시 교체의 수를 줄임으로써 SSD의 쓰기를 감소할 것이고 그 결과 성능 뿐만 아니라 SSD의 수명도 연장 에도 도움이 될 것이다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.127-135
• /
• 2006

Experimental studies of the cylindrical sintered-copper wick heat pipes were carried out to investigate the capillary heat transfer characteristics. Six models of the sintered-copper wick heat pipes were manufactured and tested to evaluate the heat transport limitations and the thermal characteristics. Also the performance of the heat pipes was analyzed theoretically and compared with the test results. The heat pipe models are divided into two sintered-wick groups and the nominal particle sizes are $180{\mu}m$(wick #1) and $200{\mu}m$(wick #2) respectively The experimental results showed that, the porosity of wick #1 was higher than that of wick #2, and also the wick #1 was generally superior than the wick #2 for the heat transport capability. The maximum heat transport rates were increased as the wick thicknesses and the vapor temperatures were increased.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.1-2
• /
• 2020

응용프로그램의 응답성을 향상시키기 위해서는 저장장치 시스템의 데이터 처리 능력이 중요하다. 한편, 차세대 메모리(NVDIMM)는 DRAM과 SSD 중간 정도의 성능 특성과 저장 용량을 갖는다. NVDIMM을 저장장치의 캐시로 사용함으로써 메모리와 저장장치의 격차는 많이 줄게 된다. 본 논문에서는 경량의 재사용 거리 측정 기법을 이용하여 효율적으로 디스크를 캐싱하는 기법을 제안한다. 제안 기법은 경량의 재사용 거리 측정 기법을 바탕으로 계산된 CFD(Computational Fluid Dynamics)값에 따라 디스크 캐시에 해당 데이터 적재 여부를 결정한다. 결과적으로 제안 기법을 적용한 디스크 캐시를 운용함에 따라 캐시의 히트율을 향상시켰다.

• The KIPS Transactions:PartA
• /
• v.19A no.1
• /
• pp.35-44
• /
• 2012

Traditional technologies that are used to improve the performance of hard disk drives show many negative cases if they are applied to solid state drives (SSD). Access time and block sequence in hard disk drives that consist of mechanical components are very important performance factors. Meanwhile, SSD provides superior random read performance that is not affected by block address sequence due to the characteristics of flash memory. Practically, it is recommended to disable prefetching if a SSD is installed in a personal computer. However, this paper presents a combinational method of a prefetching scheme and a memory management that consider the internal structure of SSD and the characteristics of NAND flash memory. It is important that SSD must concurrently operate multiple flash memory chips. The I/O unit size of NAND flash memory tends to increase and it exceeded the block size of operating systems. Hence, the proposed prefetching scheme performs in an operating unit of SSD. To complement a weak point of the prefetching scheme, the proposed memory management scheme adaptively evicts uselessly prefetched data to maximize the sum of cache hit rate and prefetch hit rate. We implemented the proposed schemes as a Linux kernel module and evaluated them using a commercial SSD. The schemes improved the I/O performance up to 26% in a given experiment.

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.301-314
• /
• 2000

As the number of World Wide Web (Web) users grows, Web traffic continues to increase at an exponential rate. Currently, Web traffic is one of the major components of Internet traffic. Also, high bandwodth usage due to Web traffic is observed during peak periods while leaving bandwidth usage idle during off-peak periods. One of the solutions to reduce Web traffic and speed up Web access is through the use of Web caching. Unfortunately, Web caching has limitations for reducing network bandwidth usage during peak periods. In this paper, we focus our attention on the use of a prefetching algorithm for reducing bandwidth during peak periods by using off-peak period bandwidth. We propose a statistical, batch, proxy-side prefetching scheme that improves cache hit rate while only requiring a small amount of storage. Web objects that were accessed many times in previous 24 hours but would be expired in the next 24 hours, are selected and prefetched in our scheme. We present simulation results based on Web proxy and show that this prefetching algorithm can reduce peak time bandwidth using off-peak bandwidth.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.241-244
• /
• 1999

시설원예는 노지원예와 달리 인위적인 환경조절을 통하여 주년안정생산이 가능하여야 하고 단위면적당 생산성을 증대시키면서 품질향상을 극대화시키는 것이 생산의 목표이다. 따라서, 주년안정생산을 위하여 고온기에 작물생산이 가능하도록 시설내 고온환경을 조절해야할 것이다. 고온환경을 조절하기 위한 냉방방식에는 자연환기 및 팬을 이용한 온실내부의 공기를 치환하는 방법, 온실내ㆍ외부에 차광망을 설치하여 온실내로 유입되는 일사량의 일부를 차단하는 방법, 수분증발을 통하여 온실내부의 잠열을 빼앗는 증발냉각방식, 히트펌프나 에어컨을 이용한 기계적인 방법이 이용되고 있다. (중략)

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.111-118
• /
• 2021

This paper proposes a novel method of caching contents that can be encoded into multiple quality levels in device-to-device (D2D)-assisted caching networks. Different from the existing caching schemes, the author allows caching fractions of an individual file and considers the self cache hit event, which the user can find the desired content in its device. The author analyzes the tradeoff between the quality of cached contents and the cache hit rate, and proposes the device caching method maximizing the expected quality that the user can enjoy. Depending on the parameter of the relationship between the quality and the file size, the optimal caching method can be obtained by solving the convex optimization problem and the DC programming problem. If the file size increases faster than the quality, the cached fractions of the contents continuously increase as the popularity grows. Meanwhile, if the file size increases slower than the quality, some of the high-popularity files are entirely cached but others are not cached at all.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1815-1827
• /
• 1993

In this paper, we evaluate the performance of a Futurebus based multiprocessor system with MESI cache coherence protocol for four bus transaction types. Graphical symbols and compiler of SLAM II are used in modeling and simulation. A steady-state probability of each state for MESI protocol is computed by a Markov chain. The probability of each state is used as an input value for a correct simulation. Processor utilization, memory utilization, bus utilization, and the waiting time for bus arbitration are measured in terms of the number of processors, the hit ratio of cache memory, the probability of internal operation, and bus bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2151-2159
• /
• 2015

Unlike an existing IP routing methods, the Content Centric Network(CCN) is new networking paradigm to find the contents by content name. The CCN can effectively process the content requested repeatedly by the user because of the cache which can be storing a content. This paper proposes a popularity based cache replacement scheme. The proposed scheme improves the hit rate better than a existing scheme. Accordingly reducing the load of server and Round Trip Time(RTT).

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.178-181
• /
• 2008

Cylindrical stainless-steel/sodium heat pipe for a high-temperature application was manufactured and tested for transient and steady-state operations. The container material was made of stainless-steel 316, and the working fluid was sodium. Stainless-steel 316 mesh screen was inserted as a capillary structure. The working fluid fill charge ratio was approximately 64 $\sim$ 181% based on the pore space of the wick. The outer diameter of the heat pipe was 12.7 mm and the total length was 250 mm. The evaporator part was 150 mm and the condenser 80 mm. The performance test of the heat pipe has been conducted in the furnace with up to 800 W. The variation of the average heat transfer coefficient was investigated as a function of heat flux and vapor temperature. As input thermal load increased, it was showed that difference of temperatures in evaporator and condenser decreased and that operating section and heat transfer characteristics at the heat pipe increased.