• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.403-404
• /
• 2003

현재까지 개발되고있는 휘발성유기화합물질의 처리기술들로는 소각, 흡착, 산화, 그리고 생물학적 처리 등이 있다. 그러나 이러한 기술은 각기 나름대로의 장점과 단점들, 그리고 적용의 한계성을 가지고 있으며, 아직도 많은 극복해야될 문제점을 가지고 있어서 여전히 연구개발 진행중에 있다. 지금까지 대형 배출원에서 일부 응용되고 있거나 처리시설로 가장 활발히 검토되고 있는 제어기술은 활성탄 흡착을 이용한 흡착처리기술이다. 그러나 실제로 흡착을 이용하여 휘발성유기화합물을 처리하고 있는 많은 업체에서 흡착시설 또는 흡착탑을 효율적으로 이용하지 못하고 있다. (중략)

• Clean Technology
• /
• v.7 no.1
• /
• pp.51-63
• /
• 2001

In this study, PSA, known as the most economic process, was used to recover $CO_2$ from the power-plant flue gas. Activated carbon and zeolite molecular sieve 13X were used as adsorbent. Activated carbon has been deemed inadequated adsorbent for separating $CO_2$ from the flue gas. However, highly concentrated $CO_2$ could be obtained as a product on the activated carbon adsorbent using the new operating cycle modifying the rinse step. Also, the recovery of $CO_2$ was improved using double-layered adsorption column packed with the activated carbon and the zeolite 13X simultaneously. Adsorption column was filled with the activated carbon in the feed-end side, and the zeolite 13X in the product-end side. The recovery of $CO_2$ increased about 40% with only 25% zeolite, and increased 67% with 50% zeolite at the experimental conditions of 13% $CO_2$ concentration, 10 SLPM flow rate and 2.2 atm adsorption pressure.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.783-791
• /
• 2008

The dynamic characteristics of adsorption using an adsorption bed packed with Li-X zeolite (UOP) were studied through the breakthrough experiments of $H_2/CH_4$ (90:10 vol%), $H_2/CO$ (90:10 vol%) and $H_2/CO_2$ (80:20 vol%) mixtures. Effects of feed flow rate (6.24~10.24 LPM) and adsorption pressure (6.1 bar~10.1 bar) in the Li-X zeolite bed with 2.7 cm of inside diameter and 80 cm of bed length were observed. The smaller feed rate or the higher operating pressure, resulted in the longer of the breakthrough time and the breakthrough curve have tailing due to temperature variance in the bed. The adsorption dynamics of the Li-X zeolite bed were predicted by using LDF model with feed flow and pressure dependent diffusivity. The prediction and experimental data were analyzed with a nonisothermal, nonadiabatic model, dual-site langmuir (DSL) isotherm

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.131-138
• /
• 2005

Freundlich isotherms and Toth isotherms were obtained for benzene adsorption on activated carbon and zeolite 13X in static experiments. Breakthrough curves of benzene were measured in adsorption bed packed with the same adsorbents. Relation between breakthrough times and partial pressure of benzene was analyzed and the Freundlich isotherm parameters were determined. Adsorption amount of benzene predicted by the analysis of breakthrough experimental results was relatively consistent with that predicted by the static experimental results. Dynamic experiments for activated carbon bed, where more symmetric breakthrough curves were obtained, produced smaller errors with zeolite bed.

• 한국가스학회:학술대회논문집
• /
• 2005.05a
• /
• pp.206-206
• /
• 2005

• Environmental engineer
• /
• s.65
• /
• pp.55-57
• /
• 1992

• Environmental engineer
• /
• s.172
• /
• pp.48-54
• /
• 2000

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.261-264
• /
• 2000

악취가스제거용으로 흔히 파쇄상 활성탄소를 사용하고 있는데 조립상 침착 활성탄소를 사용하면 경도가 높고 입도가 균일하여 흡착탑 내에서 일정한 가스 유속분포를 얻을 수 있고 Life Time을 연장할 수 있기 때문에 여러 장점이 있다. 일반 활성탄소의 표면은 비극성이며 흡착력이 본질적으로 단순히 반델발스 힘에 의한 물리흡착이기 때문에 황화수소나 $NH_3$ 등 비점이 낮은 성분에 대해서는 충분한 흡착성을 갖지 못한다. (중략)

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.594-603
• /
• 2018

The effects of operating conditions such as benzene concentration, nitrogen flow rate, steam flow rate, and bed temperature on TSA process were experimentally investigated as a potential VOC removal technology using two kinds of beds packed with activated carbon and zeolite 13X. The TSA cycle studied was composed of the adsorption step, steam desorption step, and drying and cooling step. At 2% benzene concentration, the total adsorption amounts of zeolite 13X and activated carbon were 4.44 g and 3.65 g, respectively. Since the zeolite 13X has a larger packing density than that of the activated carbon, the larger benzene amount could be adsorbed in a single cycle. Increasing the water vapor flow rate to 75 g/hr at 2% benzene concentration reduced the desorption time from 1 hr to a maximum of 33 min. If the desorption time is shortened, the drying and cooling step period can be relatively increased. Accordingly, the steam removal and bed cooling could be sufficiently performed. The desorption amounts increased with the increase of the bed temperature. However, the energy consumption increased while the desorption amount was almost constant above $150^{\circ}C$. In the continuous cycle process, when the amount of remained benzene at the completion of the regeneration step increased, it might cause a decrease in the working capacity of the adsorbent. The continuous cycle process experiment for zeolite 13X showed that the amount of remained benzene at the end of regeneration step maintained a constant value after the fourth cycle.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.97-101
• /
• 2021

Adsorption properties of heavy metals and organics in the mixed packed column of scoria and activated carbon, as well as physicochemical properties and functional groups of scoria were investigated. As the mixing ratio of scoria increased, the average removal ratios of cadmium, nickel, chromium, and lead ions increased, but that of benzene and toluene decreased. The mixed packed column of scoria and activated carbon could be effectively used for the simultaneous removal of heavy metals and organics. Scoria has Si-H and Si-O functional groups, and it was confirmed that Si-O functional groups greatly contributed to the adsorption of heavy metals.