• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.7-12
• /
• 2014

Molecular simulation was performed to evaluate the possibility of hydrogen storage of carbon nanotubes. The equilibrium state of hydrogen adsorbed on carbon nanotubes was simulated by grand canonical Monte Carlo method at constant temperature and pressure. The interaction energy between hydrogen molecule and carbon nanotube was calculated by Lennard-Jones potential model. According to the interaction energy calculated, more hydrogen molecules were adsorbed on the inside than the outside of nanotubes. Whereas the adsorption strength was higher outside than inside. Adsorption capacity was investigated for various temperature and pressure. The maximum capacity of carbon nanotube for hydrogen storage was 2.5wt% at 200 K and 200 bar.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2013

Considering considerable contents of vanadium and tungsten in spent SCR DeNOx catalysts, separation and recovery of those metals are required. In this respect, commercial anion exchange resin (MP600) was employed to recover vanadium from the synthetic solution of ammonium metavanadate. Experimental results indicated that vanadium exist as anion under the acidic condition (pH 2 ~ 6) and adsorbed on the resin. Although the adsorption rate was increased with temperature, the maximum amount of adsorption was not affected by temperature. Desorption took place under either strong acidic (less than pH 1) or strong caustic (higher than pH 13) condition. However, desorption seldom took place under moderate conditions (pH 3~11). Furthermore, adsorption equilibrium results agreed well with Freundlich isotherm and pseudo-second-order reactions. And, adsorption energy was evaluated using Dubinin-Radushkevich and Temkin isotherm.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1146-1152
• /
• 2005

Graft copolymers were synthesized from methylcellulose(MC) and acrylic acid(AA) with active carboxyl groups in the presence of potassium persulfate($K_2S_2O_8$) initiator to enhance adsorption capacity of toxic heavy metal such as $Pb^{2+}$ and $Cu^{2+}$ from wastewater. The resulting grafted copolymers(MC-g-AA/PAA) were mixture of the graft copolymers from MC and AA(MC-g-AA) and polyacrylic acid homopolymers(PAA). The degree of palling was increased with rising concentration of monomer and initiator under the reaction conditions at $60^{\circ}C$, 3 hrs. The water insoluble property of MC-g-AA showed more than 19.7% degree of grafting. So that it could be an adsorbent of heavy metals. Adsorption characteristics of the MC-g-AA were evaluated depending on the degree of grading, pH of wastewater, adsorption time, dosage of MC-g-AA and concentration of heavy metals in the different conditions. Degree of grafting, and initial concentration of heavy metal ions increased, the adsorption amount of $Pb^{2+}$ and $Cu^{2+}$ increased, but added MC-g-AA increased, the adsorption amount per unit weight of $Pb^{2+}$ and $Cu^{2+}$ decreased. The MC-g-AA showed the high $Pb^{2+}$ and $Cu^{2+}$ adsorption amount in the range pH $4{\sim}6$. Also all of $Pb^{2+}$ and $Cu^{2+}$ ions reached in adsorption equilibrium in neighborhood 4 hours. The adsorption of heavy metals described by Freundlich isotherm, it was determined the value of l/n of $Pb^{2+}$ and $Cu^{2+}$ that 0.4294 and 0.3453, respectively.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.66-73
• /
• 2006

Continuous column adsorption experiments have been conducted fur artificial and actual wastewater which containing $Ni^{2+}$ by using manganese nodule as an adsorbent for the purpose of wastewater treatment along with an increased $Ni^{2+}$ recovery in the refining of manganese nodule. The adsorption features of $Ni^{2+}$ artificial wastewater were examined by taking the height of fixed bed, influent flow rate, and the initial concentration of adsorbate as the influential parameters. The adsorption capacity of manganese nodule and the rate constant for $Ni^{2+}$ adsorption were estimated employing Bohart-Adams equation. In addition, the variation of the adsorbed amount of adsorbate for each column according to the influent flow rate and the initial concentration of adsorbate was investigated based on the breakthrough curves fur each column. For serially connected columns, the adsorbed amount of $Ni^{2+}$ for each column was observed to increase gradually as the adsorption proceeded from the initial column to the final column. The variation of the breakthrough curve for actual wastewater with the height of fixed bed was not so significant as that for artificial wastewater, which was considered to be due to the high concentration of $Ni^{2+}$ in actual wastewater. Regarding the effect of the particle size of manganese nodule on adsorption, the adsorbed amount of adsorbate was found to somewhat increase as the particle size became smaller.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.175-182
• /
• 1995

Styrene-Maleic anhydride copolymer (SMA) was prepared by the radical copolmerization of styrene and maleic anhydride using ${\alpha}-{\alpha}'$ azobis(isobutyronitrile) as an initiatrr. SMA was further reacted with m-amino phenol to obtain aminophenol-substituted SMR (mSMA). Sulfonated SMA and mSMA were also prepared by the reaction of copolymers with sulfuric acid The copolyniers were characterized by infrared spectroscopy. It was found from the results of elemental analysis that the substitution degree of aminophenol in the mSMR is 44% and the degree is lowered to 35% after sulfonation. The percentage of copolymers adsorbed on the surface of cement particles was increased with a decrease of added copolymers. While, the arnourit of sulfonated SMA absorbed on the surface of cement particles was larger than that of the sulfonated mSMA The copolymers synthesized in this study are probably expected as a high range water reducer for coiicxte.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.368-377
• /
• 2000

Si-immobilized Sargassum horneri was used to study the adsorption characteristics along with maximum adsorption conditions of heavy metal ions, Cd(II) and Ph(II) on the Si-immobilized Sargassum horneri. More amount of Cd(II) and Pb(II) ions on the Si-immobilized Sargassum horneri than Sargassum horneri were adsorbed. And Pb(II) ions were more adsorbed in all algae than Cd(II) ions more effectively in alkaline than in acidity. Recovery ratios of Cd(II) and Pb(II) ions on the Sargassum horneri were 58.0-62.6%, 61.2-64.4% respectively, Si-immobilized Sargassum horneri 56.8-92.7%, 37.8-47.9%. Recovery ratio of Cd(II) ion was higher on the Si-immobilized Sargassum horneri but it of Pb(II) ion was lower on the Si-immobilized Sargassum horneri.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.246-251
• /
• 2017

This study was carried out to evaluate the possibility of Chromium removal by 3 different kinds of adsorbents, where activated carbon(AC), carbon nanotube(CNT) and layered double hydroxides(LDHs) were employed. The highest surface area was shown in AC and pore volume was in CNT which were $1028.1m^2{\cdot}g^{-1}$ and $0.829cm^2{\cdot}g^{-1}$, respectively. AC and CNT are composed of more than 99% carbon. AC has shown the possibility of chromium removal more than 80.2% under the acidic pH condition.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.49-55
• /
• 2001

The bi-functional ion exchangers, SAPP-g-(AN/St) were synthesized with mixed vinyl monomers(acrylonitrile and styrene) onto PP fabric by the pre-irradiation grafting with E-beam and its subsequent amidoximination and sulfonation. The degree of grafting of PP-g-(AN/St) was increased with decreasing acrylonitrile composition in the mixed monomers. The water uptake of copolymers increased with decreasing in the amidoxime ratio in the copolymers and increased by sulfonation, but decreased by amidoximation. The $UO_2^{2+}$ adsorption capacity of SPP-g-St, APP-g-AN, and SAPP-g-(AN/St) were 12.4, 34.0, and 38.0 mg/g, respectively and the optimum adsorption time is about 50 hrs. As a result of uranium adsorption, the synthesized ion exchanger, which we obtained have also good affinity toward the adsorption or chelating with $UO_2^{2+}$ ions.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.163-171
• /
• 2002

The adsorption characteristics of Cd(II) and Pb(II) ions has been studied by using chitin as an adsorbent. The pure chitin was obtained from the extraction of red-crab shell dumped by fish factory. Adsorption kinetics of Cd(II) and Pb(II) ions on the chitin reached at the maximum adsorption within two minutes. Adsorbed amounts of heavy metals were pH 7.0>10.5>3.5 in the following order. Adsorption ratio by chitin was 21${\sim}$99% for Cd(II) ion and 24${\sim}$95% for Pb(II) ion. Recovery ratio of Cd(II) ion on the chitin was 22${\sim}$53%, and that of Pb(II) ion was 22${\sim}$73%. The adsorption behavior of these heavy metals was explained well by Freundlich adsorption isotherm.

• Clean Technology
• /
• v.26 no.3
• /
• pp.186-195
• /
• 2020

The isothermal adsorption, dynamic, and thermodynamic parameters of Acid black (AB) and Quinoline yellow (QY) adsorption by activated carbon were investigated using the initial concentration, contact time, temperature, and pH of the dyes as adsorption parameters. The adsorption equilibrium data fits the Freundlich isothermal adsorption model, and the calculated Freundlich separation factor values found that activated carbon can effectively remove AB and QY. Comparing the kinetic data showed that the pseudo second order model was within 10% error in the adsorption process. The intraparticle diffusion equation results were divided into two straight lines. Since the slope of the intraparticle diffusion line was smaller than the slope of the boundary layer diffusion line, it was confirmed that intraparticle diffusion was the rate-controlling step. The thermodynamic experiments indicated that the activation energies of AB and QY were 19.87 kJ mol^-1 and 14.17 kJ mol^-1, which corresponded with the physical adsorption process (5 ~ 40 kJ mol^-1). The adsorption reaction was spontaneous because the free energy change in the adsorption of AB and QY by activated carbon was negative from 298 to 318 K. As the temperature increased, the free energy value decreased resulting in higher spontaneity. Adsorption of AB and QY by activated carbon showed the highest adsorption removal rate at pH 3 due to the effect of anions generated by dissociation. The adsorption mechanism was electrostatic attraction.