• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.32-39
• /
• 2000

To investigate the adsorption-desorption reaction of Cd by sewage sludge, the adsorption of Cd from $Cd(NO_3)_2$ solutions of concentrations ranging from 5 to $50{\mu}g\;Cd\;mL^{-1}$ by sewage sludge was examined for reaction periods up to 48 hours. The amount of Cd adsorbed as a function of time was measured. The adsorption between Cd in solution and the solid phase could be described by two stages. The initial adsorption of Cd was very rapid, that is, approximately 95% of the added Cd was removed from solution within the first 30 minutes. Further, the greater the concentration of Cd added, the greater was the amount of Cd adsorbed. After the rapid initial decrease of Cd, a slower decline in the Cd concentration resulted which followed first order reversible kinetics. The equilibrium concentrations for the reactions, as well as the time period for the equilibrium reactions were dependent on the initial Cd concentrations. If equilibrium is reached, the amount of Cd remaining in solution is greater when the amount adsorbed is higher, although the percentage of Cd in solution is constant relative to the initial concentration of Cd. Some of the adsorbed Cd was released back to solution since the concentration of Cd after 48 hours was higher than the equilibrium concentration of Cd. However, despite the increased amount of Cd measured, the overall net reaction was a significant adsorption of Cd from solution by sewage sludge.

• Clean Technology
• /
• v.20 no.3
• /
• pp.290-297
• /
• 2014

Batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for adsorption of coomassi brilliant blue G (CBBG) using activated carbon with varying the operating variables like initial concentration, contact time and temperature. Equilibrium adsorption data were fitted into Langmuir, Freundlich and Dubinin-Radushkevich isotherms. From estimated separation factor of Langmuir and Freundlich, this process could be employed as effective treatment for removal of CBBG. Also from Dubinin-Radushkevich isotherm model, adsorption energy (E) indicated adsorption process is physical adsorption. From kinetic experiments, the adsorption reaction was found to confirm to the pseudo second order model with good correlation. Intraparticle diffusion was rate controlling step. Thermodynamic parameters like change of free energy, enthalpy, and entropy were also calculated to predict the nature of adsorption. The change of enthalpy (406.12 kJ/mol) indicated endothermic nature of the adsorption process. The change of entropy (1.66 kJ/mol K) showed increasing disorder in process. The change of free energy found that the spontaneity of process increased with increasing adsorption temperature.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.150-155
• /
• 1995

Mo 단결정 표면에 황을 흡착시켜 형성된 상층구조를 AES와 LEED로써 연구하였다. 황의 피복률은 sulfur gun으로부터 생성되는 S2 flux로써 조절하였으며, 여러 가지 흡착된 황의 상층구조를 LEED로써 관찰하였다. 황화된 Mo 표면에서 탈산소반응(HDO)의 모델 분자로서, Furan의 흡착과 반응을 승온반응분광법(TPRS)으로 조사하였다. 낮은 온도에서 Furan 분자의 헤테로 원자는 직접 이탈하여 안정한 기체상의 반응 생성물인 일산화탄소를 형성하였으며, 이 반응은 Mo의 (100) 및 (110)면에서 각각 깨끗한 표면 및 황화된 표면에 관계없이 일어났다. 이를 바탕으로 Mo 표면에서 Furan의 분해반응에 대한 메카니즘을 제안하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.31-37
• /
• 2011

This study investigated on the adsorption and photocatalysis of Reactive Black 5(RB5) by the hydroxyapatite(HAP)/Titanium dioxide($TiO_{2}$) media. The adsorption of RB5 on $TiO_{2}$, HAP and $TiO_{2}$/HAP was investigated during a series of batch adsorption experiments. The amounts adsorbed at equilibrium were measured. Langmuir and Freundlich isotherm models were tested for their applicability. The result of equilibrium studies of $TiO_{2}$, HAP and $TiO_{2}$/HAP adsorbent were found to follow Langmuir isotherm model. The adsorbed amounts(Qmax) were found to be 5.28mg/g on single $TiO_{2}$, 12.45mg/g on single HAP and 9.03mg/g on $TiO_{2}$/HAP, respectively. The experimental data were analysed using the pseudo-first-order adsorption and photocatalysis kinetic models. According to these models, RB5 degradation by $TiO_{2}$/HAP was affected by interaction effect of photocatalysis and adsorption.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.45-51
• /
• 2010

Cadmium (Cd) adsorption by the activated carbon containing hydroxyapatite (HAP) was investigated. Cd adsorption with different HAP mass ranged from 10% to 30%. With more HAP, more Cd was adsorbed. These results suggest that the higher HAP dose causes an increase of the ion exchange potential in HAP sorbent. Kinetics and equilibrium studies were investigated in series of batch adsorption experiments. Langmuir and Freundlich isotherm models were fit to the equilibrium data and Cd adsorption on HAP sorbent were found to follow the Freundlich isotherm model well in the initial adsorbate concentration range. The simple kinetic model, the pseudo first order kinetic model and the pseudo second order kinetic model, were used to investigate the adsorption. The adsorption reaction of Cd followed the pseudo second order kinetic model, and the adsorption pseudo second order kinetic constants ($k_2$) increased with increasing initial HAP amounts onto activated carbon. Also, intraparticle diffusion model was used to investigate the adsorption mechanism between adsorbate and adsorbent in the aqueous phase. Surface adsorption reaction and intraparticle diffusion occur simultaneously Cd adsorption mechanism from aqueous phase in this study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.299.1-299.1
• /
• 2013

넓은 표면적을 갖는 탄소나노튜브(CNT)는 기체 분자의 흡착 성능이 기존의 다른 흡착제에 비해 우수한 것으로 알려져 있으나, CNT의 물리/화학적 성질은 튜브의 직경과 기하 구조에 의해 큰 차이를 나타내며 정제가 매우 까다롭다는 단점을 가지고 있다. CNT와 외형적으로 매우 흡사한 질화붕소 나노튜브(BNNT)의 경우, 구조와 직경에 상관없이 열적, 화학적 안정성이 우수하여 $CO_2$를 비롯한 다른 공해 물질들의 제거제나 흡착제로서 응용 가능성이 매우 높다. 본 연구진은, BN-결함을 도입한 BNNT 벽면에서의 $CO_2$ 흡착 반응과 $CO_2$를 에너지 물질인 HCOOH와 $H_2CO_3$로 전환하는 반응에 대한 양자화학 이론 계산 연구를 수행하였다. 그 결과, $CO_2$에 대한 $B_N$-BNNT 흡착 성능이 튜브의 직경에 상관없이 매우 우수하였고, $B_N$-BNNT 벽면상에 흡착된 $CO_2$가 물 분자와 반응할 경우 HCOOH와 $H_2CO_3$로의 전환반응이 효과적으로 진행되었다. 이러한 이론 계산 연구 결과는 BN-BNNT가 $CO_2$ 흡착제 및 에너지 전환 촉매로의 응용 가능성을 훌륭히 제시하고 있다.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2002

The sorption of Cd$^{2+}$ on calcite was studied in aqueous solutions of several electrolytes. The Cd$^{2+}$ concentration, 10$^{-8}$ M, was kept well below saturation with respect to CdCO$_3$(s). Sorption behavior of Cd$^{2+}$ in different ionic strengths of NaClO$_4$solutions shows that sorption is independent of ionic strength. This result suggests that Cd$^{2+}$ sorption on calcite surface is of a specific nature, and adsorption is controlled by an inner-sphere type of surface complex. Two stages in the sorption behavior could be identified: an initial rapid uptake, followed by slower uptake reaching a maximum steady state by 145 hrs. No evidence was observed for surface precipitation, although it can not be entirely ruled out. Desorption of Cd$^{2+}$ from the calcite surface after resuspension into Cd-free solution is initially very rapid, but depends partly on the previous sorption history. Desorption behavior of Cd$^{2+}$ show that an initial rapid desorption followed either by slow uptake reaching a maximum, as in the adsorption experiments, or slowing desorption to reach a steady state minimum. This irreversible behavior of Cd$^{2+}$ sorption and desorption may act as one of the controls for regulating the mobility of dissolved Cd$^{2+}$ natural aqueous systems. Calculated adsorption partition coefficients suggest that overall sorption and desorption process in the concentration range are controlled by d single mechanism.ingle mechanism.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.804-811
• /
• 2011

The aim of this study is to evaluate the applicability of adsorption models for understanding adsorption properties of adsorbents. For this study, the adsorption charateristics of $NO_3^-$ by commercial anion exchange resin, PA-308, were investigated in bach process. The adsorption kinetic data for $NO_3^-$ by anion exchange resin showed two stage process comprising a fast initial adsorption process and a slower second adsorption process. Both the pseudo-first-order kinetic model and the pseudo-second-order kinetic model could not be used to predict the adsorption kinetics of $NO_3^-$ onto anion exchange resin for the entire sorption period. Only the fast initial portion ($t{\leq}20min$) of adsorption kinetics was found to follow pseudo-first-order kinetic model and controlled mainly by external diffusion that is very fast and high, whereas, the slower second portion (t > 20 min) of adsorption kinetics seems to be controlled by a second-order chemical reaction and by intraparticle diffusion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.384-389
• /
• 1997

고분자 촉매 담체인 스티렌-디비닐벤젠의 제조시 중합반응 개시제의 함량에 따른 영향과 반응기의 재질에 따른 영향을 수소흡착실험을 통하여 확인하였다. 담체의 중합반응시 제조조건이 동일하다 할지라도 개시제의 함량에 따라서 담체의 기공 특성이 달라지므로 개시제의 함량은 모노머 양의 1%를 사용한 시료가 수소흡착능이 가장 좋은 것으로 나타났다. 반응기의 재질은 teflon으로 직접 제조한 것보다는 teflon으로 코팅 처리한 것이 더 수소흡착능이 좋은 것으로 확인되었다.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.59-67
• /
• 2014

The amount of the contaminants that can be adsorbed on the drain was evaluated for the effective remediation of the contaminated soil, and the contaminants adsorptivity of the drain was evaluated by comparing the isothermal adsorption model after carrying out the contaminants adsorption test of the reactants coated on the surface of the drain. The reactant used in the experiment is a natural zeolite, and the contaminants are copper, lead and cadmium. The results that Freundlich and Langmuir adsorption isotherm model are compared to the adsorption amount according to the change of the initial concentration by the contaminants. As a result of the component analysis, because Si, Al and O are contained approximately 28%, 11% and 48%, respectively, it is identified that the material coated on the surface of the drain is the component of the zeolite which is the reactant for the adsorption of the heavy-metal (Cu, Pb, Cd) contaminants. The heavy-metal adsorption kinetic of the zeolite which is the reactant was decreased in order of lead, copper and cadmium. The important factor of the performance evaluation of the adsorbent is the reaction rate, and if zeolite is used as the reactant in the relationship between the maximum amount of adsorption and reaction rate, it can be utilized as the design factor that determine the removal order of the complex heavy-metal. In other words, because the maximum adsorption quantity of lead is smaller compared to copper but the reaction rate is relatively fast, it can be primarily removed, and copper can be removed after removing the lead. It was analyzed that Cadmium can be finally removed after that other heavy-metal is removed.