• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.117-124
• /
• 2023

X-ray diffraction analysis, X-ray fluorescence analysis, thermal differential and thermos gravimetric analysis, cation exchange capacity analysis, and Cesium (Cs), Strontium (Sr) adsorption experiments were performed to investigate the physical and chemical properties of natural zeolite from Guryongpo in Korea. As a result of X-ray diffraction analysis, minerals such as mordenite, heulandite, clinoptilolite, and illite are contained, and as a result of X-ray fluorescence analysis, elements such as SiO₂, Al₂O₃, CaO, K₂O, MgO, Fe₂O₃ and Na₂O are contained, and the cation exchange capacity was 148.6 meq/100 g. As a result of thermal differential and thermos gravimetric analysis, it was confirmed that the thermal stability was excellent up to 600 ℃. As a result of the adsorption equilibrium experiment over time, the equilibrium was reached within 30 min. for Cesium (Cs) and within 8 hr. for Strontium (Sr), and the adsorption rates of Cesium (Cs) and Strontium (Sr) were 80% and 18%, respectively. As a result of the single-component isothermal adsorption experiment, in conformed to the Langmuir model, and the maximum Cesium (Cs) adsorption amount was 131.5 mg/g, which was high, while the Strontium (Sr) maximum adsorption amount was 29.5 mg/g, which was low. In the case of the natural zeolite used in this study, the content of minerals including 8-rings such as clinoptilolite, heulandite, and mordenite is high, showing high selectivity for Cesium (Cs).

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.243-252
• /
• 1996

In order to investigate the effects of pH and organic matter content on cadmium adsorption and exchangeable cations desorption in soils, the adsorption isotherms of cadmium and the desorption isotherms of calcium and magnesium on four New jersey soils at four pH values were plotted, and the cadmium partition coefficients (Kd) were also calculated. The slopes of cadmium adsorption isotherms dramatically increased with increasing solution pH. Judging from Langmuir adsorption equations, the maximum adsorption quantities(b) of cadmium at high pH values were much greater than those at low pH values for the same soil. The partition coefficients increased greatly with increasing solution pH. The slopes of regression equations between partition coefficients and pH values were steep in the order of the organic matter content of the soils. The correlation coefficients (r2) between partition coefficient and organic matter content for soils. The correlation coefficients (r2) between partition coefficient and organic matter content for $1\times10^{-4}$M increased from 0.3027 at pH 4.0 to 0.9964 at pH 8.5 and from 0.2093 at pH4.0 at 0.9657 at pH 8.5 for$2\times10^{-4}$M ${Cd(NO_3)}_2$. The desorption quantities of calcium and magnesium decreased with increasing solution pH and increased with- increasing cadmium adsorption.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.96-101
• /
• 1988

It is important to assess the effects of ionic strength and type of anions when studying the adsorption of heavy metals on zeolite because the background salt may complex with heavy metals and compete for adsorption sites. This experiment was carried out to determine the effect of ionic strength and anion species($Cl^-$, $SO^{2-}\;_4$, and $ClO^-\;_4$) on heavy metal adsorption. Heavy metal adsorption by zeolite from solutions in the range of 10 to 50ppm was studied in the presence of NaCl, $Na_2SO_4$ and $NaClO_4$, with different concentrations. The ionic strength ranged from 0.01 to 1.00. Adsorption of heavy metal cations could be described by the Freundlich isotherm equation. Increasing the ionic strength of equilibrium solutions, the amounts of heavy metal adsorbed on the zeolite surfaces decreased in all three of the anion systems. This fact could be attributed to the competition of background salt cation and the decrease in initial activity of heavy metal cations. In the presence of Cl anion, less adsorption resulted than in the presence of $SO_4$ or $ClO_4$ anions of the same ionic strength, indicating the presence of uncharged and negatively charged complexes of heavy metal with Cl ligands.

• Clean Technology
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2023

The amount of hydrogen adsorbed in arrays of single walled carbon nanotubes (SWNTs) was studied as a function of nanotube diameter and distance between the nearest-neighbor nanotubes on square arrangements using a grand canonical Monte Carlo simulation. The influence of the geometry of a triangle array with the same diameters and distances was also studied. Hydrogen-carbon and hydrogen-hydrogen interactions were modeled with Lennard-Jones potentials for short range interactions and electrostatic interactions were added for hydrogen-hydrogen pairs to consider quantum contributions at low temperatures. At 194.5 K, Type I isotherms for large-diameter SWNTs and Type IV isotherms without hysteresis between adsorption and desorption processes for wider tube separations were observed. At 200 bars, the gravimetric hydrogen storage capacity of the SWNTs was reached or exceeded the US Department of Energy (DOE) target, but the volumetric capacity was about 70% of the DOE target. At 77 K, a two-step adsorption was observed, corresponding to a monolayer formation step followed by a condensation step. Hydrogen was adsorbed first to the inner surface of the nanotubes, then to the outer surface, intratubular space and the interstitial channels between the nanotube bundles. The simulation indicated that SWNTs of various diameters and distances in a wide range of configurations exceeded the DOE gravimetric and volumetric targets at under 1 bar.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.704-712
• /
• 2006

This research was designed to investigate the removal of heavy metals, such as $Al^{3+}$, $Cu^{2+}$, $Mn^{2+}$, $Pb^{2+}$ and $Zn^{2+}$, by adsorption on clay minerals. Bentonite(Raw-Bentonite), $Ca^{2+}$ and $Na^+$ ion exchanged bentonite(Ca- and Na-Bentonite) and montmorillonite, such as KSF and K10 from Sigma Aldrich, were used as adsorbents. The component of five inorganic adsorbents was analyzed by XRF, and the concentration of metal ions was measured by ICP. The cation exchange capacity(CEC) and the particle charge of adsorbents were measured. The initial concentration range of metal ions was $10{\sim}100$ mg/L. From the experimental results, it was shown that the adsorption equilibrium was attained after $1{\sim}2$ hours. The maximum percentage removal of $Al^{3+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ on Na-Bentonite were more than 98% and that of $Mn^{2+}$ was 66%. $Al^{3+}$ was leached out from KSF with the higher concentration of hydrogen ion. Percentage removals of $Pb^{2+}$ and $Zn^{2+}$ on KSF were 88% and 59%, respectively. In general, the percentage removal of metal ions was decreased with the higher initial concentration of metal ions. The adsorption capacity of metal ions on Na-Bentonite was $1.3{\sim}19$ mg/g. Freundlich equation was used to fit the acquired experimental data. As the results, the adsorption capacity of metal ions was in the order of Na-Bentonite$\gg$Raw-Bentonite$\cong$K10>Ca-Bentonite>KSF. Freundlich constant, K of Na-Bentonite was the largest for metal ions. The order K of Na-Bentonite was Al>Cu>Pb>Zn>Mn, and the adsorption intensity(1/n) was determined to be $0.2{\sim}0.39$.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.83-89
• /
• 2000

Bentonite has been considered as a liner material to restrict the release of hazardous heavy metals from the landfill. The adsorption of copper onto a domestic bentonite was studied to provide the adsorption isotherm and the effect of solution chemistry and temperature. The copper adsorption was fitted well to a Freundlich isotherm, in which Freundlich constants and correlation coefficient were calculated to be $K_F=1.18$, n=1.65, and $r^2=0.97$, respectively. The distribution coefficients ($K_d$) for the adsorption of copper decreased with increasing initial copper concentration. The $K_d$ increased with increasing the pH of solution, and drastically increased at pH > 5.3 because of precipitation of most copper species. As the ion strength of $Na^+$ in solution increased the $K_d$ decreased, while it increased with increasing the concentration of $SO_4{^{2-}}$ in solution. An increase in the temperature of experimental solution decreased the $K_d$ values.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.231-234
• /
• 2001

We performed a basic experiment for rapid. on-line, real-time measurement of HBsAg by using a BIACORE biosensor, a chip-based sensor utilizing surface plasmon resonance technology to quantify the recognition and interaction of biomolecules. We immobilized an a -HBsAg antibody on a CM5 chip surface which was activated by N-hydroxysuccinimide for amine coupling with HBsAg, and measured the mass increase from the coupling. This study showed the potential of this biosensor-based method as a rapid, multi-sample, on-line assay. Once properly validated, it can serve as a more powerful method for HBsAg quantification.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.60-65
• /
• 2000

In order to predict the chromatogram for organic acid in ion chromatography, Langmuir isotherm parameters were obtained by Retention Time Method (RTM) and moment method. Ion chromatography analysis for formic acid was performed and compared with theoretically predicted profiles under isocratic condition. Band profiles were estimated with the equilibrium-dispersive model of chromatography using a PDEsolver Macsyma . The relationship between the characteristics of chromatogram and the variable operating condition in chromatography such as the flow rate, ionic strength and injection volume was studied. Satisfactory agreement was observed between the experimental and the estimated chromatograms with parameters obtained form the moment method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.105-113
• /
• 1995

Adsorption experiments of heavy metal cations by Fe- and Al-hydroxides was conducted to obtain clear information on their adsorption mechanisms. The adsorption isothermal curves of heavy metal cations by Fe- and Al-hydroxides conformed to Langmuir's equation. Increasing the crystallinity degree of Fe- and Al-hydroxides tended to decrease the adsorption capacity and binding energy of heavy metal cations. At the same crystallinity degree, Al-hydroxide showed higher adsorption capacity and energy for the heavy metal cations than Fe-hydroxide. The adsorption capacity and energy of heavy metal cations were directly related to CEC, specific surface area and charge density of hydroxides, and the sequence was in the order of $Cu^{+{+}}$ > $Zn^{+{+}}$ > $Cd^{+{+}}$. The adsorption mechanism of $M^{+{+}}$ form of heavy metal could be presumed as the specific adsorption of $M^{+{+}}$ and the desorption of two $H^+$ from the surface aquo($OH_2$) and/or hydroxo(-OH) group for each mole of $M^{+{+}}$ adsorbed. A ring structure between $M^{+{+}}$ and two surface aquo and/or hydroxo groups was postulated. Nonspecific adsorption involved the adsorption of $MCl^+$ and the desorption of one H+ from the surface aquo and/or hydroxo groups for each mole of $M^{+{+}}$ adsorbed. A single bond structure in which $MCl^+$ replaced one $H^+$ from the surface aquo and/or hydroxo groups was postulated. The ratio of specific to nonspecific adsorption increased with increasing pH.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.756-760
• /
• 2012

In this work, the coal tar pitch-based activated carbons (ACs) were prepared by KOH activation for electrode materials of supercapacitor. The effects of activation temperature on electrochemical performance of the ACs were investigated with cyclic voltammogram (CV) measurement. The textural and morphological properties of the ACs were measured by adsorption isotherms and field emission scanning electron microscope (FE-SEM) analyses, respectively. The experimental results indicated that the specific capacitance of the ACs increased with developing the micropore volume by activation temperature. As a result the specific capacitance of the ACs increased, owing to the development of micro pore volume of the ACs.