• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.324-330
• /
• 2018

In order to produce a stable denture for severe alveolar bone loss area, it is not only important that .0a suitable occlusion is established but also to consider compatibility with the surrounding muscle to form a suitable polished surfaces. Neutral zone is defined as a potential area where the neuromuscular system of the tongue, cheeks and lips is balanced can be determined through the neutral zone impression technique. And if artificial teeth are aligned within the neutral zone and the polished surface follows the anatomical form of the dynamic muscle, higher stability and retention of the denture may be obtained through coordination with the surrounding muscle tissue. This case is being reported since the concept of the neutral zone was applied to a patient with severely atrophic residual alveolar ridge and the result was clinically satisfactory in both function and aesthetics.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.99-112
• /
• 2018

This research focuses on the university-business incubation from the prospective of triple helix and summarizes complementary researches and develop plans for university-business incubation. To pursue these objectives, we analyzed the studies of triple helix on domestic as well as overseas university-business incubators and their collaboration. The findings of this study showed that firstly In order to innovate the business incubator of the university, it is necessary to secure sufficient competence for the capability. For this purpose, Research and policy implications from various perspectives must be preceded.. Second, the collaborative relationship of business incubations should lead to organic and dynamic cooperative relations instead of static cooperative partnerships. Furthermore, based on the internal innovation that runs the business incubation program together with bottom-up rather than top-down approach, it is necessary to plan incubation and lead the transformation through creative ideas. Third, for the dynamic collaboration of business incubation, the management and practice of the organization should be given priority so that the boundary spanning appropriate to each situation, which turn increase the absorption capacity. As a future direction, studies are expected to explore the development of innovative university-business incubation about boundary spanning and knowledge transformation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.681-691
• /
• 2022

Zostera marina (ZM), a type of seagrass registered as a marine protected species in South Korea, provides valuable ecosystem services to humans, such as improving marine water quality, providing food, spawning grounds and habitats for marine life, and absorbing carbon dioxide. Therefore, the government is seeking to preserve ZM by designating ZM-protected areas. This study examined the public willingness to pay (WTP) for the preservation of ZM using contingent valuation. The one-and-one-half-bounded model was adopted for WTP elicitation, and the single-bounded model was also applied for comparison. The spike model was employed to deal with many zero WTP responses. The household average WTP was estimated as KRW 4,087 per year, securing statistical significance. The national value was KRW 84.1 billion per year. The preservation value of ZM estimated in this study can be used as important data for economic analysis of various projects or policy implementation for its preservation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.407.2-407.2
• /
• 2016

Cu2ZnSnS4 (CZTS) 박막은 낮은 가격과 유리한 특성을 가지므로서 차세대 박막 태양전지에서 이상적인 흡수층 물질 중 하나로 여겨지고 있다. 우리는 CZTS 박막 태양전지를 합성하는 데 있어서 Zn와 ZnS를 전구체에 사용하여 이에 따른 특성 차이를 연구하였다. 열처리 한 박막은 Zn와 ZnS를 사용하였을 때 특성 차이를 조사하기 위하여 여러 분석을 진행하였다. CZTS 박막의 미세구조와 조성 분포, 전기적 특성을 살펴보았다. Zn를 사용한 CZTS 박막은 큰 입자크기와 더 적은 영역에서 Zn가 집중되어 있는 층을 가진다. CZTS와 Mo 경계인 이 영역에 ZnS 2차상이 존재함을 의미하며 Zn 타겟을 사용하였을 때 더 낮은 Zn 조성을 가지는 것을 확인하였고 이는 결과적으로 접합 특성의 향상을 가져온다. 제작 된 CZTS 태양 전지 소자에서 이러한 이유로 Zn를 사용하였을 때 5.06%로 ZnS를 사용하였을 때에 비하여 더 높은 효율을 얻을 수 있었다.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.147-152
• /
• 2005

Calculation equations of fired fuel comsumption rating at boiler can lead from combustion anal-ysis and boiler heat balance using mass & energy conservations. By comparing calculation equation results with those of measurement, we can confirm the deviation of fuel consumption rate, and correction rate, and correction degree, and can also establish the proven technology to apply the equation at the site. We applied fuel rate equation to the operating power plant and recorded $2.4\%\;&\;1.5\%$ of deviation at each coal and oil fired boilers. This range of deviation is regarded as trustable to apply the fuel consumption equation to the actual site.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.48-53
• /
• 2007

The objective of this paper is to investigate the influence of impact conditions on the impact characteristics of the stainless sheet for the case of the fixed boundary conditions. In order to examine impact characteristics of the sheet, three-dimensional finite element analyses and impact tests have been performed. High speed tensile tests have been carried out to obtain strain-stress relationships including the effects of the strain rate. In order to improve an accuracy of the FE analysis, the hyper-elastic model and the damping factor have been introduced. The results of the FE analyses and the impact tests have been shown that the diameter of the impact head does not affect the absorption energy of the stainless sheet. In addition, it has been shown that the absorption rate of energy maintains almost $82.5\;\sim\;83.5\;%$ irrespective of the impact energy level and the diameter of the impact head. From the results of FE analyses, the variation of stress and strain energy in the stainless sheet has been quantitatively examined.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.1-10
• /
• 1999

In this paper, we analyzed the radiation patterns of a monopole antenna mounted on the complex structures by using FDTD method associated with 3-D PML absorbing boundary condition. In order to validate the proposed FDTD code, the radiation patterns of monopole antenna mounted on cylinders and spheres were compared with the exact solutions of $Carter^{[1]}$ and $Harrington^{[2]}$. For all case considered, the predicted radiation pattern exhibited excellent agreement with exact solution. To be able to model the more complex structures, the proposed FDTD methods are combined with BRL-CAD. And this procedures is applied to predict the radiation patterns of a wire antenna attached to the top of a Blackhawk helicopter.

• The Korean Journal of Malacology
• /
• v.9 no.2
• /
• pp.94-102
• /
• 1993

동양달팽이(Nesiohelix samarangae)의 자성생식기 중 정자낭(spermatheca)의 미세구조를 투과전자현미경을 이용하여 관찰하였다. 성체의 정자낭의 내강에서는 정자와 이와 관련된 물질들 또는 상피로부터의 분비물질들이 관찰되었다. 정자낭의 내강을 둘러싸고 있는 벽의 상피는 단층원주상피로서 내강과 연한 세포의 원형질막은 미세융모를 가지고 있었으며 섬모는 가지고 있지 않았다. 이 미세융모들의 기부에서는 고배율 하에서 pinocytotic vesicle들이 관찰되었고 때로 세포의 분비물을 세포 밖으로 방출하는 모습도 관찰되었다. 세포들의 상부세포질에는 많은 수의 mitochondria가 있었고, 때로 분비과립과 lysosomd들이 존재하기도 하였다. 이들보다 아래에는 잘 발달한 골지체와 과립소포체(RER)들이 있었다. 이 부위에서 분비과립들이 많이 형성되어 있는 모습이 세포에 따라 관찰되었고, 그 아래에 즉, 각 세포의 하반부 세포질에 상하로 긴 핵이 관찰되었다. 세포의 기부 원형질막은 상부 세포질 내로 깊게 그리고 수없이 많이 주름을 이루고 있어 인접한 세포와의 경계를 구분할 수 없을 정도였다. 기저막의 아래에는 근육다발과 색소세포들이 결합조직 내에서 관찰되었고, 정자낭의 외막은 큰 액포로 인하여 세포질들이 원형질막 주변으로 밀려나 있는 특이한 세포들로 이루어져 있었다. 정자낭의 기능은 정자를 일시 저장하며 정자낭 상피에서 분비되는 소화액들로 정자를 일차적으로 세포외 소화하고 소화되지 않은 물질들을 흡수하여 이차적으로 세포내소화하는 것으로 생각된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2000

In this paper, we analyzed the radiation patterns of a monopole antenna mounted on cylinder and EM penetration problems in the complex structures by using FDTD method associated with 3-D PML absorbing boundary condition. In order to validate the proposed FDTD code, the radiation patterns of monopole antenna mounted on cylinders were compared with the exact Carter's solutions. As a results, the predicted radiation pattern exhibited excellent agreement with exact solution. And the FDTD code is applied to analyze the EM penetration problems in complex structures, Blackhawk helicopter. As the plane wave is excited, a significant amount of energy penetrates the helicopter structure, and it is dependent on aperture/airframe interface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.521-531
• /
• 2001

This paper presents the extraction scheme of the scattered waves by a target above the ground using the buried antenna in a lossy and dispersive medium. The half wave dipole antennas are used to transmit and to receive a signal. The transmission line model as a feeding model is considered to take into account the effect of transmission line in a real system. The ground is modeled by the 2nd order Debye approximation with the dispersion and loss. PLRC algorithm and DPML as absorbing boundary condition are utilized to apply the 2nd order Debye approximation to FDTD. To extract the scattered wave, in addition, we employed the delay time extraction algorithm. The simulations are conducted to observe the variation of magnitude in scattered wave and detection of target position according to the change of moisture content of the lossy medium.