• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.419-426
• /
• 2010

This paper discusses a series of experiments including material improvement in order to ensure quality of grouting for the post-tensioned structure. In presstressed concrete, grouting refers to the construction procedure of filling empty space of duct enclosing the prestress tendons using cementitious material, To date, adequate quality control of the grouting has not been established in Korea because the relationship between the grouting and durability of post-tensioned structure is not well-recognized. The Korean standard does not consider the important material characteristic, wick effect, which is caused by tendons in the ducts, and furthermore current standard testing method does not quantify reasonable material segregation. As a result, the grout material, which satisfies the current material standards, may well exhibit excessive bleeding of water or shrinkage during construction. In this study, international codes and standards related to grouting were surveyed. The mix proportions of the constituents and novel admixtures were suggested to meet equivalently with these standards. Performance of this enhanced grout was compared with common domestic grouts using the international standard testing method. A series of mock-up specimens considering geometry of PC beam was constructed and grout flow pattern was observed as the grout was injected. It was observed that the grouting performance was highly influenced by material properties and filling characteristic can be varied depending on geometry of ducts.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.159-166
• /
• 2008

Video image processing systems (VIPS) offer numerous benefits to transportation models and applications, due to their ability to monitor traffic in real time. VIPS based on a wide-area detection algorithm provide traffic parameters such as flow and velocity as well as occupancy and density. However, most current commercial VIPS utilize a tripwire detection algorithm that examines image intensity changes in the detection regions to indicate vehicle presence and passage, i.e., they do not identify individual vehicles as unique targets. If VIPS are developed to track individual vehicles and thus trace vehicle trajectories, many existing transportation models will benefit from more detailed information of individual vehicles. Furthermore, additional information obtained from the vehicle trajectories will improve incident detection by identifying lane change maneuvers and acceleration/deceleration patterns. However, unlike human vision, VIPS cameras have difficulty in recognizing vehicle movements over a detection zone longer than 100 meters. Over such a distance, the camera operators need to zoom in to recognize objects. As a result, vehicle tracking with a single camera is limited to detection zones under 100m. This paper develops a methodology capable of monitoring individual vehicle trajectories based on image processing. To improve traffic flow surveillance, a long distance tracking algorithm for use over 200m is developed with multi-closed circuit television (CCTV) cameras. The algorithm is capable of recognizing individual vehicle maneuvers and increasing the effectiveness of incident detection.

• Korean Journal of Social Welfare
• /
• v.55
• /
• pp.205-230
• /
• 2003

This article examines the continuity and change of Korean welfare regime during 1990s. Democracy, globalization and the financial crisis changed the landscape of Korean society as a whole and provided a catalyst for the change of the Korean welfare regime. In order to show how and what changed in Korean welfare regime, this study concentrates on the transformations of income maintenance programmes and social welfare services. The changed aspects are as follow: (1) The ratio of social expenditure to GDP has increased during 1990s and now stood at ten percent level. (2)Rather than backing up the company welfare, government strove to build and expand income maintenance devices for all citizens. (3) The poverty and inequality reduction effects of income maintenance programs are very weak in early 1990s, but they are gradually getting stronger impact on poverty and inequality. But, there are also continuance. (1) In spite of the relative development of income maintenance programs, social welfare services are still poorly designed as before. (2) The expenditure level of social welfare services shows sharp contrast to income maintenance programs and lagged behind the other OECD countries. (3) The expansion of social service sector employment are also not so salient. In 2002, social service employment is only at close to 2.5 per cent of the total employment. Accordingly, korean welfare regime is now characterized by a model which is to curb poverty and inequality by engaging in direct government provision of income maintenance programs, but refrain from expanding social service by relying on net welfare which encourage the provision of services within the family. A implication of our analysis is that the expansion of social welfare Korea saw after 1997 was not really an regime shift. According to the arguments of Peter Hall, first and second order changes in policy do not automatically lead to third order changes which imply regime shift. Policy changes which occurred during 1990s was not accompanied by a shift in policy paradigms. Family dependency in welfare is not yet changed.

• Physical Therapy Korea
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1997

Skeletal muscle fatigue is often associated with diminished athletic performance and inability to maintain an expected force output as a function of time. The purpose of this study was to compare the effect of duration of exercise on skeletal muscle fatigue between Weight Lifters(WL) and Non-Weight Lifters(NWL). There were twelve normal healthy adult volunteers, ranging in age from 18 to 35 years. The group consisted of six NWL and six WL. Randomized cross-over design was set up and work-rest cycle was 8 minutes work and 1 minute rest based on 15% MVC. Muscle fatigue was measured by the amount of force produced by the wrist flexor muscle and EMG amplitude over time. Repeated measures ANOVAs($2{\times}4$) were used to determine two types of subjects(WL, NWL) during four different duration of exercises(16, 32, 48, 64 minutes). The force decreased over time in NWL and WL, but there was no significant difference(F=2.83, p>0.05). However, the EMG amplitude increased in WL(0.8200) and NWL(0.6348). The WL exhibited an increase in EMG at the end of the period, especially at 48 minutes of exercises than did the NWL(F=9.58, p<.05). This suggests the WL were able to adjust to prolonged effort with adaptations in neural effect over time, resulting in higher EMG amplitude. That is, WL may be able to learn to recruit more motor units with training. It is important to the degree of neuromuscular fatigue and the time needed for recovery may differ considerably between WL and NWL, there is a need to plan proper strength training or rehabilitation protocols to match with the requirements in different characteristics of groups.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.891-904
• /
• 1997

Today's orthodontic treatment goals lie in functional esthetics, and the importance of the latter is increasing gradually in trend. Considering such, study on growth and development of soft as well as hard tissues becomes inevitable. Early studies emphasize mainly on skeletal analysis using cephalometric data. However, more recent studies report that maxillofacial soft tissue, which plays a critical role in determining facial esthetics, is influenced by underlying hard tissue, and yet close relationship between them was not noticed. Cephalometric x-rays were taken of 137 Korean boys and 106 girls with no systemic disease, fair developmental status and normal occlusion for two consecutive years; afterwards, soft tissue analysis, which was divided into four parts, facial form lip position & posture, nose, and thickness, was done to correlate them with general growth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.821-834
• /
• 2015

This study presents the analysis of flow and bed change characteristics considering bed protection work built on the immediate downstream of weir to protect river bed from scouring. The study area is 37km reach from Hyunpoong station to Masuwon station including Hapcheon- Changryoung multi-function weir in the Nakdong river. CCHE2D model is calibrated and validated for evaluating the flow and bed change characteristics during Typhoon Kompasu in 2010. Three simulation conditions are set up: Case 1 is a natural channel without installation of weir. Case 2 involves an installation of weir in the natural channel. Case 3 involves an installation of weir with bed protection in the natural channel. Flood frequency (50, 100 and 200yr) is applied to each scenario to analyze the effects of bed protection work. While the sediment rate is increased in the downstream of fixed gate and sluice-type gate, river bed scouring rate is increased in the downstream of lift-type gate in Case 2 comparing with the results of Case 1. The river bed scouring is not occurred in the immediate downstream of weir (~30m) due to the effect of bed protection, but larger amount of sediment is occurred in the downstream of weir (60m~) which the bed protection is not installed comparing with the results Case 1. Through the results of simulation considering bed protection work, this study would be helpful to expect bed change and operate the weir as well as manage.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.277-284
• /
• 2012

In this study, a heat-transfer performance analysis is carried out for a multi-channel volumetric air receiver for a solar power tower. On the basis of a series of reviews regarding the relevant literature, a calculation process is proposed for the prediction of the wall- and air- temperature distributions of a single channel at given geometric and input conditions. Furthermore, a unique mathematical model of the receiver effectiveness is presented through analysis of the temperature profile. The receiver is made of silicon carbide. A total of 225 square straight channels per module are molded to induce the air flow, and each channel has the dimensions of $2mm(W){\times}2mm(H){\times}0.2mm(t){\times}320mm(L)$. The heat-transfer rate, temperature distribution and effectiveness are presented according to the variation of the channel and module number under uniform irradiation and mass flow rate. The available air outlet temperature applied to the solar power tower should be over $700^{\circ}C$. This numerical model was actually used in the design of a 200 kW-level commercial solar air receiver, and the required number of modules satisfying the thermal performance could be obtained for the specified geometric and input conditions.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.301-328
• /
• 2006

The geology of the Tumbang Mirih area in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Results of geochemical exploration and geological mapping exposed obviously that large amounts of gold-bearing quartz veins were found in the whole Tumbang Mirih areas. In many places, gold grains were megascopically detectable from panning products of stream sediments and conglomerate as Quaternary sediments. Even though no remnants of quartz veins are revealed in the most of survey area except Taran region, association of fold grains with layers of quartz pebbles and clays which correspond to the horizon of unconformity or previous river bottom indicates that the gold grains were separated from quartz veins. Along rivers often pebbles and clay layers just over or 10 to 20cm above the current waterlevel are recognized. The occurrence of gold in the conglomeratic layer was frequently confirmed during geochemical exploration. Since the conglomeratic layer was old stream sediments of Quaternary, it can be assumed that deposition of golds was controlled by shape of river floor, speed and shape of river flow, and distance from the source rock. Taran area and northern Takaoi area based on the all data are recommended as the promising areas.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.192-201
• /
• 1999

This study was aimed to introduce the measurement of $CO_2$ concentration and leaf area index in the phytotron for predicting the effect of CO.E, light and leaf area index on the instantaneous photosynthetic rate of sweet pepper with the existing ASKAM model. Measurements were made in 2 semi-closed phytotron compartments in which three different $CO_2$ concentrations were applied at random. Plants were grown on containers with circulating nutrient solution at 21$^{\circ}C$ and 80-95% relative humidity. The model estimates crop net $CO_2$ uptake for short time intervals during the day based on short-term data of daily radiation, temperature and $CO_2$ concentration. During the photosynthesis measurements, $CO_2$ concentrations in both compartments and in the basement were measured every minute. This was also done for the flow of pure $CO_2$ into the compartment, global radiation, photosynthetic active radiation inside the compartment, temperature and relative humidity. Crop growth models summarize our knowledge on crop behavior and have as such a wide range of applications in analysis, crop management and thus as a farm management tool.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.103-114
• /
• 2011

Usage of bicycle has been supported the universal reduction of energy consumption and $CO_2$. For the same purpose, new constructions for long length bike roads are planned in Korea. Recently, laboratory tests of physical properties and resistance against environmental loading about optimum mix design of roller compacted concrete, that have advantages of high structural performance by cement hydration and aggregate interlocking, simple construction procedure and low construction cost, are performed for the effective construction of new bike roads. However, properties of roller compacted concrete had different results between laboratory and field tests since it had different compaction method. Also, construction method of roller compacted concrete are not defined for the application of bike roads since it had different demand performance such as thin pavement thickness, low strength and etc with road pavements. Thus, in this experimental research was launched to evaluate the core properties, visual inspection, compaction ratio, water content, thickness reduction rate of roller compaction, skid resistance and roughness by experimental construction about variable mix proportion and compaction method based on laboratory test results. And construction method of roller compacted concrete pavement were suggested for the application of bike roads.