• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.381-381
• /
• 2012

유기물/무기물 나노 복합체를 이용하여 제작한 메모리 소자는 저전력 구동, 간단한 공정, 플렉서블한 성격과 같은 장점 때문에 많은 연구가 진행되고 있다. 다양한 유기물/무기물 나노 복합체를 이용한 비휘발성 메모리 소자에 대한 연구는 많이 진행되었으나, fullerene 계열의 [6,6]-phenyl-C85 butyric acid methyl ester (PCBM) 나노 입자와 poly (methylmethacrylate) (PMMA)의 나노 복합체를 사용하여 제작한 유기 쌍안정성 메모리 소자의 전기적 특성과 메커니즘에 대한 연구는 미흡하다. 본 연구에서는 기억층으로 PMMA 박막 안에 분산되어 있는 PCBM 나노 입자를 트랩층으로 사용하는 메모리 소자를 제작하여 전기적 특성 및 안정성에 대하여 관찰하였다. 소자제작을 위하여 PCBM 나노 입자를 PMMA와 함께 용매인 클로로벤젠에 용해한 후에 초음파 교반기를 사용하여 두 물질을 고르게 섞었다. Indium-tin-oxide 가 코팅된 glass위에 PCBM 나노 입자와 PMMA가 섞인 나노 복합체를 스핀 방법으로 적층한 후, 열을 가해 클로로벤젠을 제거하여 PCBM 나노 입자가 PMMA 안에 분산되어 있는 전하 수송 층을 형성하였다. 형성된 전하수송 층 위에 열 증착 방식으로 상부 Al 전극을 형성하여 유기 쌍안정성 메모리 소자를 제작하였다. 제작된 소자의 전류-전압 (I-V) 측정 결과 특정 전하 수송 층의 두께에서는 큰 ON/OFF 전류 비율을 보여준다. PMMA만을 사용한 소자에서는 I-V 메모리 특성이 나타나지 않는 결과로부터 PCBM 나노 입자가 전하 수송 층 내에서 메모리 특성의 역할을 한다는 것을 보여준다. 전류-시간 (I-t) 측정 결과로 소자의 ON/OFF 전류 비율이 시간이 지남에 따라 큰 감쇠 없이 104 s까지 103값을 지속적으로 유지되어 메모리 소자의 안정성을 보여주었다. 실험의 결과로 PCBM이 포함된 메모리 소자의 메커니즘과 전하 수송 층의 두께에 따른 메모리 특성을 설명하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.35-40
• /
• 2012

In this study, adsorption characteristics of expanded graphite (EG) were investigated by a series of batch adsorption tests using p-Xylene as a model volatile organic compounds (VOCs). After acid treatment, graphite were expanded at various temperature from $600^{\circ}C$ to $1000^{\circ}C$ for one minute. The optimal temperature was $800^{\circ}C$, where the expansion ratio reached 195 times of original volume. The BET specific surface area of EG was $92.4m^2/g$, which was only 1/10 of granular activated carbon (GAC), however the adsorption of p-Xylene by EG was almost completed within 5 minutes while that of GAC continued for 7 days because the majority of pores of EG was consisted with meso- and macro-pores. According to the Langmuir isotherm analysis, the maximum specific adsorption of p-Xylene onto EG was 24.0 mg/L with the adsorption constant of 7.94. In conclusion, the adsorption capacity of EG was much less than that of GAC due to the significantly lower specific surface area, but the first order kinetic constant was more than 500 times larger than GAC. Overall, EG might be effective where the fast adsorption is required.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.353-362
• /
• 2023

TOC, which can measure more than 90% of organic substances, can be measured quickly and easily,replacing BOD and COD, which were indicators of organic pollutants. According to water quality pollution control standards, when measuring TOC, if the inorganic carbon ratio in the sample is over 50%, the NPOC (Non-Purgeable Organic Carbon) method should be used. If volatile organic compounds (VOCs) are present at a certain concentration, the TC-IC (subtracting inorganic carbon from total carbon) method should be used. To validate the limitations of these analytical conditions, experiments were conducted by varying the ratio of TOC to IC in purified water and measuring the concentration of TOC in test solutions. The results showed no significant difference between the TC-IC method and the NPOC method. When measuring samples with added VOC standard solutions, it was observed that the carbon loss due to purging was not significant when using the NPOC method. Therefore, it is concluded that the choice of analytical method does not lead to significant differences when VOCs are present in the sample. To account for potential variations in results based on water quality pollution control standards and regulations regarding the approval and testing of environmental measurement devices, a comparison of field sample concentration values was made using two widely used types of TOC analyzers in Korea. The results showed variations of 0.02 to 0.83 mg/L between methods depending on the manufacturer, highlighting the need for caution when selecting an instrument.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.605-622
• /
• 2007

Elemental, Rock-Eval pyrolysis and isotopic analysis of the core sediments from the northwestern and eastern Ulleung Basin of the East were carried out to identify their geochemical characteristics, spatial and vertical variation and origin of organic matter in Upper Quaternary sediments from the northwestern and eastern Ulleung Basin of the East Sea. TOC, m and TS did not show spatial variation between the sampling locations whereas they showed systematic vertical variation associated with MIS stages related to the sea-level change of the East Sea. It is suggested that these past changes of sea-level influenced the sedimentary depositional environments and/or diagenesis which resulted the patterns observed in this study. Based on the results of TOC/N, TS/TOC, ${\delta}^{13}C_{org}\;and\;{\delta}^{15}N_{org}$ analysis, organic matters in the study area appears to be predominantly originated from the marine algae rather than land plant and deposited under normal marine oxic condition during MIS I and MIS III period, and under euxinic/anoxic condition during MIS II period. TOC/N, ${\delta}^{13}C_{org}\;and\;{\delta}^{15}N_{org}$ have a relatively constant value irrespective of MIS stages, implying that the organic matter source does not change by the sea-level fluctuations. However, the results of Rock-Eval pyrolysis indicates that the organic matter is in immature stage and originated from land-plant (Type III), locating in the immature stage land plant (Type III). Similar differences were reported from other areas such as the Atlantic Ocean, Iberia Abyssal Plain, Mediterranean Sea, suggesting that Rock-Eval method does not exactly reflect the characteristic of immature organic matters. Accordingly, the application of Rock-Eval pyrolysis for delineating the source of immature organic matters should be approached with caution and all other geochemical proxies should be considered altogether at the same time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.137-147
• /
• 2008

Soil Vapor Extraction (SVE) has been extensively used to remove volatile organic compounds (VOCs) from the vadoze zone. In order to investigate the removal mechanism during SVE operation, laboratory modeling experiments were carried out and tailing effect could be observed in later stage of the experiment. Tailing effect means that removal rate of contaminants gets significantly to decrease in later stage of SVE operation. Also, mathematical model simulating the tailing effect was used, which considers rate-limited diffusion in a water film during mass transfer among gas, liquid, and solid phases. Measurement data obtained through the experiment was used as input data of the numerical analyses. Sensitivity analysis was performed to examine the effect of each parameter on required time to reach final target concentration. Finally, it was found that the concentration in the soil phase decreased significantly with a liquid and gas diffusion coefficient larger, actual path length shorter, and water saturation smaller.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.227-235
• /
• 1993

This study was carried out to evaluate the possibility of composting for organic solid waste from restaurants and domestics. Small three vessels were prepared which were conditioned to semianaerobic, convectional and air-blowed type. During the experiment period for 4 months, the values of volatile solid(VS) %, moisture % and carbon/nitrogen (C/N) ratio of the wastes in the vessels were stabilized, 80 % to 40-50 %, 80 % to 48-55 % and 18 to 8-10, respectively. On the basis of VS % and C/N ratio, the reactions were more adaptable to 2nd order formula than to 1st order one, Reaction rate constant of the 3 vessels were estimated, $4.96{\times}10^{-5}(day^{-1})$ in the semianaerobic type, $5.82{\times}10^{-5}(day^{-1})$ in the convectional type and $8.42{\times}10^{-5}(day^{-1})$ in the air-blowed type on VS. Compared reaction rate constants(k), it can be said that composting period shorten if air is supplied artificially and that vessels simular to those of this study are useful for household organic waste at the backyards.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.69-72
• /
• 2015

This study investigated the effects of oil dose and soil texture on the analysis results for total petroleum hydrocarbon (TPH) in artificially oil-contaminated soils. The same amount of diesel was mixed with soils having different soil texture, and soil TPH concentrations were then analyzed for comparison. Presence of clay in the soil showed lower soil TPH analysis results than that of sand only. As the clay content was increased in the soil, the lower soil TPH concentration was obtained by incompleteness of solvent extraction. As the organic matter content in soil was increased from 5.2% to 10% (weight basis), a higher concentration of TPH was obtained by TPH analysis. However, at a higher organic content in the soil, 18%, resulted in a lower TPH concentration than those of 5.2% and 10%. Gasoline dose to the soil resulted in a significantly low TPH concentration due to the volatilization of gasoline while soil mixing and analysis. This study results would provide fundamental information either to the expectation of TPH concentration in artificially oil-contaminated soil or to estimation of oil release in the real oil-contaminated site.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.184-184
• /
• 2010

Write-once-read-many times (WORM) 메모리 소자는 1회에 한해 쓰기 가능한 저장 장치로서 반영구적인 기록 보존을 필요로 하는 분야에서 널리 사용되는 저항 구조의 비휘발성 메모리 소자이다. 무기물을 사용한 WORM 메모리 소자의 제작과 소자의 전기적 특성에 관한 많은 연구가 활발히 진행되었으나 절연성 고분자인 Polystyrene (PS) 박막에 분산된 ZnO 나노입자를 이용한 무기물/유기물 복합 구조의 WORM 메모리 소자에 관한 연구는 상대적으로 미흡하다. 본 연구에서는 ZnO 나노입자가 분산되어 있는 PS를 스핀코팅 방법으로 박막 형태로 증착하여 WORM 메모리 소자를 제작하고 전기적인 성질을 조사하였다. 소자를 제작하기 위해 ZnO 나노 입자와 PS를 용매인 N,N-디메틸포메미드에 혼합하여 소자를 제작하였다. 그 후 하부 전극인 ITO가 증착되어 있는 유리 기판 위에 ZnO와 PS가 분산되어 있는 고분자 용액을 스핀 코팅 방법으로 도포한 후에 열을 가해 용매를 제거하여 박막을 형성하였다. ZnO 나노입자가 분산되어 있는 PS 박막 위에 Al을 상부 전극으로서 증착하였다. 전압을 인가하여 측정한 전류-전압 특성은 1.5 V에서 소자의 전도도가 크게 향상이 되는 것을 관측하였다. 읽기 전압에서 낮은 전도도(OFF 상태)와 높은 전도도 (ON 상태)의 크기는 $10^3$으로 이며, ON 상태가 된 이후에는 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 특성이 관측되었다. ZnO 나노 입자가 없이 PS 만으로 박막을 제작한 소자는 쌍안정성 특성이 나타나지 않았다. 따라서 소자에서 전류 쌍안정성으로 나타난 원인은 PS안에 분산되어 있는 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 WORM 메모리 소자의 기억 유지 특성에 대한 결과는 장시간에 걸친 측정에서 ON 전류 및 OFF 전류의 변화가 거의 없었다. 이 실험 결과는 제작된 무기물/유기물 복합 구조를 가진 WORM 메모리 소자는 우수한 기억 특성을 가지고 있으며 반영구적인 메모리 소자로 사용할 수 있음을 제시하고 있다.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.248-254
• /
• 2016

Efficacious wastewater treatment is essential for increasing sewage sludge volume and implementing strict environmental regulations. The operation cost of sludge treatment amounts up to 50% of the total costs for wastewater treatment plants, therefore, an economical sludge destruction method is crucially needed. Amid several destruction methods, wet air oxidation (WAO) can efficiently treat wastewater containing organic pollutants. It can be used not only for sludge destruction but also for useful by-product production. Volatile fatty acids (VFAs), one of many byproducts, is considered to be an important precursor of biofuel and chemical materials. Its high reaction condition has instituted the study of gravity pressure reactor (GPR) for an economical process of WAO to reduce operation cost. Simulation of subcritical condition was conducted using Aspen Plus with predictive Soave-Redlich-Kwong (PSRK) equation of state. Conjointly, simulation analysis for GPR depth, oxidizer type, sludge flow rate and oxidizer injection position was carried out. At GPR depth of 1000m and flow rate of 2 ton/h, the conversion and yield of VFAs were 92.02% and 0.17g/g, respectively.

• Clean Technology
• /
• v.16 no.4
• /
• pp.245-253
• /
• 2010

Optimum conditions for UV-radiated photopolymerization of unsaturated polyester that could be used as protecting layer of large diameter pipe were investigated in this paper. UV photopolymerization method was selected to solve the problems, arising when thermal polymerization by organic peroxide was used, such as the instability of peroxide initiator, the evolution of volatile organic compound, and thermal deformation of product. Two of the photo-initiators (Irgacure 819 and Darocure 1173) well known for its penetrating ability deep into the polymer layer were selected, and the optimum conditions for photopolymerization (1.5 phr initiator content, 1:1.2 initiator ratio, Ga lamp for UV source) were found from the thermal and mechanical test results of the resultant UP polymers. In addition, composite materials containing UP polymer and glass fiber were tested for hardness, impact strength, and flexural strength to find that the impact strength of composite significantly improved.