• 대한기계학회논문집A
• /
• 제41권2호
• /
• pp.111-119
• /
• 2017

본 논문은 자세 제어 장치(ESC)와 후륜 조향 장치(RWS)를 장착한 통합 섀시 제어기의 성능을 향상시키기 위해 후륜 조향각을 결정하는 방법을 제안한다. 차량을 안정화시키기 위해 필요한 제어 요 모멘트는 자세 제어 장치와 후륜 조향 장치를 이용하여 만들어진다. 각 장치의 타이어 힘을 결정하기 위해 의사역행렬 제어할당 방법을 적용한다. 제어기의 성능을 향상시키기 위해 후륜 조향 장치의 조향각을 결정하는 데에 네 가지 방법을 적용한다. 차량 시뮬레이션 패키지인 CarSim에서 시뮬레이션을 수행하여 제안된 방법들이 통합 섀시 제어기의 성능을 향상시킬 수 있음을 검증한다.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1291-1297
• /
• 2014

본 논문에서는 자세 제어 장치와 능동 후륜 조향을 이용한 통합 섀시 제어를 제안한다. 제어에 필요한 요 모멘트를 만들어 내기 위해 직접 요 모멘트 제어 방법을 이용한다. 가중 역행렬 기반 제어할당 방법을 이용하여 제어 요 모멘트를 자세 제어 장치의 제동력과 능동 후륜 조향의 조향각으로 분배한다. 가중 역행렬 기반 제어 할당 방법에 가변 가중치를 도입하여 다양한 구동기 조합을 표현하고 차량의 속도를 높이기 위해 시뮬레이션을 이용하여 가변 가중치를 최적화한다. 차량 시뮬레이션 패키지인 CarSim 에서 시뮬레이션을 수행하여 제안된 방법이 차량의 조종안정성과 횡방향 안정성을 향상시킨다는 사실을 검증한다.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.130-140
• /
• 2000

In this paper the reference model following control(RMFC) scheme through the optimal control theory is investigated for the independent rear wheel steering(IRWS) vehicle. RMFC vehicle follows the dynamic performance of a virtual vehicle as a reference model deisgned in the controller. Linear vehicle model of two degres-of-freedom is used to derive control scheme which is applied to full vehicle for evaluating handling performances. And 4WS vehicle through RMFC is compared to the conventional 2WS vehicle and 4WS vehicle in the J-turn test. The RMFC logic is also extended to IRWS vehicle, IRWS with RMFC shows not only the excellent handling performance but salso some advantages in terms of the directional stability and responsiveness from the simulation results.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.53-59
• /
• 2022

This paper describes an integrated control of torque vectoring and rear wheel steering using model predictive control. The control objective is to minimize the yaw rate and body side slip angle errors with chattering alleviation. The proposed model predictive controller is devised using a linear parameter-varying (LPV) vehicle model with real time estimation of the varying model parameters. The proposed controller has been investigated via computer simulations. In the simulation results, the performance of the proposed controller has been compared with uncontrolled cases. The simulation results show that the proposed algorithm can improve the lateral stability and handling performance.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.997-1003
• /
• 2016

본 논문은 자세 제어 장치와 능동 후륜 조향장치를 가지는 통합 섀시 제어에서 요 모멘트 분배를 위해 적응 알고리즘을 적용하는 방법을 제안한다. 통합 섀시 제어는 상위제어기와 하위제어기로 구성된다. 상위제어기에서 슬라이딩 모드 제어 이론을 이용하여 차량을 안정화시키는데 필요한 제어 요 모멘트를 계산한다. 하위제어기에서는 제어 요 모멘트를 만들어 내기 위해 자세 제어 장치의 제동 압력과 능동 후륜 조향장치의 조향각을 결정하는 데에 적응 알고리즘을 적용한다. 차량 시뮬레이션 패키지인 CarSim에서 시뮬레이션을 수행하여 제안된 방법의 타당성을 검증한다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.209-215
• /
• 2002

A study of the guideway vehicle was made for a comparison of ride stabilities between its two primary steering types; one is the front wheel steering and the other the front-rear wheel. A numerical model as a closed loop system was built for an investigation of various factors to have an influence on the vehicular critical speed which is closely associated with ridabilities. It was shown that dynamics stabilities of the front steering type was much better over a large value of steering gain and the longer distance between front axle and guide link for both types provided better stabilities as well. A large steering gain ratio of the front to the rear significantly plays an important role in an improvement of stability in the front-rear steering. To observe a qualitative trend on stability behaviors, the root locus was obtained by considering a time lag which may be frequently caused by the complicated steering mechanism. In performing so, the appropriate selection of steering gain had a greater effect on the front-rear steering vehicle far more ride comfort. In addition, the dynamics model proposed here can be utilized for a more accurate evaluation on the vehicle design in lateral or yawing absorber and moreover expanded for the analysis of independent four-wheel steering vehicle.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.1156-1158
• /
• 2010

경주용 카트에 현가장치와 차동장치가 존재하지 않으므로 선회 시에 후륜 내측 바퀴가 들리도록 애커먼 조향 기구와 큰 킹핀 경사각, 캐스터으로 설계되어 있다. 경주용 카트 드라이버는 고속으로 주행하고 빠르게 선회 시가 가능하도록 충분한 기능을 보유하도록 공학적인 해석이 필요하다. 이 논문에서는 조향기구의 설계 시 가장 중요인자인 애커먼 조향 기구를 평면에서 다양한 인자에 대하여 해석하였다.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.17-23
• /
• 2012

An integrated dynamic control (IDCF) with an active front steering system and an active rear braking system is proposed and developed in this study. A fuzzy logic controller is applied to calculate the desired additional steering angle and desired slip of the rear inner wheel. To validate IDCF system, an eight degree of freedom, nonlinear vehicle model and a sliding mode wheel slip controller are also designed. Various road conditions are used to test the performance. The results show that the yaw rate of IDCF vehicle followed the reference yaw rate and reduced the body slip angle, compared with uncontrolled vehicle. Thus, the IDCF vehicle had enhanced lateral stability and controllability.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.23-28
• /
• 2019

This paper presents an optimal performance of rear wheel steering vehicle for maneuverability. The maneuverability of vehicle is evaluated in terms of yaw rate, body slip angle and driver input. The maneuverability of vehicle can be improved by rear wheel steering system. To obtain optimal performance of rear wheel steering vehicle, the optimal control history is designed. The high dimensional trajectory optimization problem is solved by formulating a quadratic program considering rear wheel steer input. To evaluate handling performance 7 degree-of-freedom vehicle model with actuation sub-models is designed. A step steer test is conducted to evaluate rear wheel steering vehicle. A response time, a TB factor, overshoot, and yaw rate gain are investigated through objective criteria, assessment webs. The handling performance of vehicle is evaluated via computer simulations. It has been shown from simulation studies that optimal controlled rear wheel steering vehicle provides improved performance compared to others.