• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.1
• /
• pp.7-11
• /
• 1983

The purpose of this study was to prepare low methoxyl pectins (LMPs) by pectinesterase (PE) using waste tangerine peels and to compare the chemical, physical and gelling properties of the prepared pectins with the commercial LMP. The LMPs were prepared by treating albedo with 0.25M $Na_2CO_3$ to activate the PE. PE was then inactivated by heating. The sample was centrifuged and the supernatant was collected. LMP was obtained as precipitate by adding alcohol to the collected supernatant. The amounts of extractible pectins in albedo were 12.71~12.98% on a dry weight basis. Methoxyl contents of LMPs prepared by treating albedo with PE at pH 7.5 for 10min, at pH 8.5 for 10min, 20min and 30min were 5.12%, 4.27%, 3.08%, 1.85% respectively, demonstrating that the methoxyl contents of the preparations decreased as the degree of treatment albedo with PE increased. The acetyl contents of the preparations ranged from 0.09% to 0.12%, the values of which do not interfere with gel formation. The anhydrouronic acid contents of the prepared pectins were in the range of 94.2%~94.8%. The values of viscosity and molecular weights of the prepared LMPs tent to decrease as the degree of PE action on albedo increased. The textural value of the prepared LMP gels determined by Consistometer, Ridgelimeter and Instron denonstrated that the excess treatment of albedo with PE significantly impaired the gelling properties of the preparations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.235-244
• /
• 2011

The physicochemical properties and quality changes in salted and dried brown croaker products using deep seawater salt were investigated for preparation with different pretreatment, salting and drying conditions. Optimum salt concentration, salting time and drying time for product were 20% of body weight, 12 hrs at room temperature ($25{\pm}2^{\circ}C$), and 24 hrs at $30{\pm}2^{\circ}C$, respectively. The volatile basic nitrogen (VBN), peroxide value (POV), viable cell count and acid value (AV) of viscera and blade removed products were 18.9~22.4 mg%, 21.0~32.5 meq/L, and 2.3~4.4 mg/mL, $2.0\sim3.5{\times}10^3$ CFU/g, respectively and only viscera removed products were 31.2~38.1 mg%, 40~55.2 meq/L, 7.0~11.5 mg/mL, $4.1\sim5.5{\times}10^3$ CFU/g, respectively. Changes in quality of salted and dried brown croaker products were investigated during storage at room temperature and $5{\pm}2^{\circ}C$. The POV, AV and viable cell counts of salted and dried brown croaker products increased in commercial salt used and only viscera removed products compared with deep seawater salt used and viscera and blade removed products during storage time. Results in this study showed that the deep seawater salt was very effective for quality control of salted and dried brown croaker products and pretreatment method was a very important factor for preparation products. The optimum conditions for preparation of salted and dried brown croaker product were 20% of body weight for salt concentration, 12 hrs at $25{\pm}2^{\circ}C$ for salting time, and 24 hrs at $30{\pm}2^{\circ}C$ for drying time. Optimum storage time for quality maintenance was 14 days at $5{\pm}2^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.730-737
• /
• 2006

High performance liquid chromatographic methods for the simultaneous determination of 12 biogenic amines were developed and contents of biogenic amines in 23 varieties of Korean commercial fermented food were analyzed. Dansyl derivatives of biogenic amine were very stable and had good peak resolution. Except agmatine, the recovery of biogenic amines from soybean paste with extraction of 0.1 N HC1 added biogenic amines to soybean paste was greater 85%. The calibration curve showed good linearity over a concentration range up to 50 ${\mu}g/mL$. In the determination of biogenic amine level in Korean commercial fermented foods, doenjang and chungkukjang (fermented soybean pastes), soy sauce, anchovy and pacific sand lance liquid jeotkal (fermented fish sauce products), and cabbage kimchi had high level biogenic amines. Especially, traditional doenjang had a histamine (HIS) level of 952.0 mg/kg, a tyramine (TYR) level of 1,430.7 mg/kg. Most cheese had low level of biogenic amines, but one Gouda cheese had a tyramine (TYR) level of 97.5 mg/kg. A low level of biogenic amines was detected in wines, beer, yoghurt, and sausage. Putrescine (PUT), cadaverine (CAD), tryptamine (TRY), histamine (HIS), tyramine (TYR), and 2-phenylethylamine (PHE) were mainly formed in fermented foods by the action of microorganism, so their levels were high with a range. On the other hand, spermidine (SPD), spermine(SPM), serotonin (SER), noradrenaline (NOR), and dopamine (DOP) were formed originally via biosynthesis with consequent low level.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.350-355
• /
• 1995

This study was conducted to use oyster shells, which have caused environmental problems in the coastal of Korea, as an agricultural material after processing. Physico-chemical components and neutralizing amount on the Ihyun silt loam of crushed oyster shell and slaked lime were examined. In field experiment, the properties of the soil, growth and yield of lettuce, cabbage, spinach, onion, red pepper and soybean were examined by the treatments of the shell(3.68ton/ha) or the lime (2.76ton/ha) with a randomized block design. Particle size of crushed oyster shell consisted of 73.4% of 1~60mesh and 26.6% larger then 61 mesh and contents of CaO, OM, and $P_2O_5$, etc. were 55.5%, 1.3%, and 0.29%, respectively. The requirement of the shell to neutralize the soil was 130~135% of the lime, but after 24months, it was the same. The application of the shell increased the contents of available $P_2O_5$ and $SiO_2$ exchangeable Ca in used soil. The shell tratment increased the leaf height, leaf width, etc. of the examined plants, and the yields 6~154% according to examined plants, as compared with the nonliminged, indicating that the shell possesses a great potential as an agricultural material with the same effectiveness as the lime.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.197-202
• /
• 2009

The long term stability of ion current of QMS has been one of key parameters for monitoring gas process in vacuum. The time dependence of ionic current was monitored while the pressure of nitrogen gas was kept at a fixed pressure by introducing the gas into vacuum chamber. The chamber was evacuated to ${\sim}3{\times}10^{-9}\;Torr$ to reduce background signals before the measurement. Two ion sources were tested; one had brownish or black color due to gas contamination and the other one was new, i.e. cleaner. At a nitrogen pressure of $1{\times}10^{-5}\;Torr$, the ionic currents measured by the contaminated ion source decreased faster with time. The decrease rate was respectively ${\sim}46%$ for cleaner one and ${\sim}84%$ for contaminated one after ${\sim}5.5%$ hours. In order to test the effect of filament material on the ion current decrease, we fabricated a tungsten(W) filament which consisted of two parts; one half was made of W and the other was coated with yttria. The similar decrease of ionic currents were shown for the two types of filaments, indicating that slight change of temperature of filament due to material difference i.e. baking effect could not improve the origin of ionic current decrease. Overall the decreasing rate of ionic current is more closely associated with contaminated ion source of QMS rather than its filament materials.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.315-325
• /
• 2011

There are not many practical measures to solve a water conflict, when a hydromorphologically asymmetric situation in international rivers exists whereby downstream users may not affect upstream users but upstream users do cause downstream impacts. In taking advantage of this merit, North Korea has built Imnam Dam in upstream of North Han River and uses water for trans-basin hydropower generation. As an impact of this dam South Korean' area as a downstream user has been suffered from water deficit and dry river. It is very critical for South Korea to solve a key problem such as water allocation for water supply and river maintenance. Therefore, this study is aim to suggest alternatives for equitable water allocation in consideration of special circumstances between the South and the North. For this, reviewing the allocation methods of water rights is carried using lessons obtained from international river cases. The results show that the minimum desired streamflow is calculated at 7.3 $m^3/sec$; water budget analysis by the equitable distribution of streamflows at the border line of the North Han River, the difference in water supply deficiency is at 3.7 $m^3/sec$ before and after Imnam Dam; in the determined distribution method, the difference in water deficiency is at 11.38 $m^3/sec$. These results show that South Korea should be secured 11.38 $m^3/sec$ from North Korean's Imnam Dam in respective of water use right and sound river maintenance.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.69-90
• /
• 2011

To develop the descriptive evaluation questionnaire with high validity and reliability on the Clothing and Textiles section of the middle school Technology & Hone Economics textbook, apply it to students and analyze its results. We made out a draft for descriptive evaluation questionnaire that was based upon the concrete establishment of the goal and the range of evaluation. We also made a rubric for scoring as well as sample answer-sheets. Finally, we completed a total of twenty three descriptive evaluation questions and we applied it to sixty five 2nd-grade students in two classes in a middle school. Descriptive evaluation questionnaire exhibited the relative high validity on each question. Moreover, three graders gave the same score on each question of descriptive evaluation, suggesting that descriptive evaluation questionnaire has the high inter-grader reliability and the strong correlation. But, low academic achievement was generally observed in the subjects. They had difficulty in describing their knowledge via their own language and drawing up accurate and detailed answers. They recognized the positive aspects of descriptive evaluation questionnaire, but they felt it uncomfortable due to study-burden and description itself. To overcome these limitations, it is required that students should experience various materials related to subject contents in classes as well as textbooks, concentrate themselves on finding solutions for problems, expand their scope, and practice describe them in advance. Therefore, the additional training for description evaluation questionnaire will be necessary for the more efficient and discriminative questionnaire. Also the questionnaire with high validity and reliability should be developed and the aggressive and voluntary participation of teachers will be needed.

• Clean Technology
• /
• v.17 no.1
• /
• pp.62-68
• /
• 2011

Hydrodynamic characteristics in multistage annular type fluidized bed (riser: $0.01{\times}0.025{\times}2.8m^3$, J-valve: $0.009{\times}0.015m^2$)were investigated. Glass beads ($d_p=101{\mu}m$, ${\rho}_b=1,590kg/m^3$, $U_{mf}=1.25{\times}10^{-2}m/s$, Geldart classification B) was used as a bed material. Accumulated weight by the electronic balance was measured to determine the solid flow rate in batch-type. In circulation condition, we measured the accumulated weight of particle transported from riser. At the steady state condition, solid circulation rate was calculated from time interval of the heated bed material passing between two thermocouples. Solid flow rate increased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 2.2 to 23.4 kg/s. However, mean residence time decreased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 1,438 to 440 s. The solid holdup in the riser was determined by measuring pressure differences according to the riser height. These results showed a similar trend to that of simple exponential decay type except for the top section of the riser. To verify the gas bypassing from top bubbling beds to middle bubbling beds, $CO_2$ gas was injected by tracer gas in constant ratio, and then was measured $CO_2$ concentration in outlet gas by gas chromatography. Gas bypassing occurred below 2.6% which is negligible value.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.186-192
• /
• 1997

Increased activities of phase 2 enzymes including quinone reductase(QR) have been reported to be associated with protection of animals from neoplastic, mutagenic, and other toxic effects of many carcinogens. In previous study, we found that methanol extract of roasted and defatted perilla meal induced the activity of quinone reductase, an anticarcinogenic marker enzyme, in murine hepalc1c7 cells. Current study showed that unroasted perilla had a limited QR-inducing activity, suggesting that roasting cause the generation of active component(s). Thus we hypothesized that QR inducer in perilla might be covalently linked to sugar moiety and released during roasting process. Methanol extract of defatted raw perilla was subject to acid treatment in order to hydrolyze the potential sugar moiety. Prolonged hydrolysis of methanol extract of defatted raw perilla at $98{\sim}100^{\circ}C$ increased the ability to induce cytosolic QR activity of hepalclc7 cells. Furthermore roasting at 180 and $200^{\circ}C$ resulted in significant induction of QR activity. The result strongly support the idea that QR inducer(s) is present in bound form in raw perilla and released during roasting. Cellular QR activity was induced proportionately with the increase of concentration of methanol extract of roasted perilla. The induction of QR by defatted perilla was also examined in the cytosols of liver, small intestine, stomach, lung and kidney of male ICR mice. Induction patterns showed specificity with respect to target tissue and roasting of perilla. Unroasted perilla meal (defatted) significantly induced QR in liver and lung, while roasted perilla meal induced QR in liver and stomach. The observation that raw perilla showed similar QR induction patterns to roasted perilla is consistent with our proposal that QR inducer(s) is present in bound form and released by physical and chemical treatments as digestive or microbial enzymes could release the inducers from inactive glycoside forms in gastrointestinal tract of mice. In conclusion, perilla could exert protective effect against chemically induced carcinogenesis by inducing phase 2 enzymes in biological systems regardless of chemical and physical process such as roasting.