• Journal of Veterinary Clinics
• /
• v.12 no.1
• /
• pp.877-886
• /
• 1995

The recycling nuclear transplantation(NT) technique has the powerful potential of producing a large number of genetically identical embryos and offsprings from one embryo. Multiple generational cloning by this technique utilizes the NT embryo itself as the donor for the next generation of cloning. In this experiment, we have produced the third generational cloned embryos by recycling NT. Further we examined comparatively the electrofusion rate and in vitro developmental potential in the cloned embryos of the first second and third generations. The embryos of 16-cell stage were collected from the mated does by flushing oviducts with Dulberco's phosphate buffered saline containing 10 % fetal calf serum(FCS) at 47 hours after hCG injection. In the first generation NT, the nuclear donor embryos were synchronized in the phase of Gl/S transition of 32-cell stage. The first and second generation NT embryos developed to 16-cell were used as donor nuclei for second and third generation. The recipient cytoplasms were utilized the oocytes collected at 14 hours after hCG injection, following revoming the nucleus and the first polar body by micromanipulation. The separated blastomeres were injected into the enucleated recipient oocytes by micromanipulation and were fused by electrical stimulation. The electrofusion rate was seen to be 78.0, 88.0 and 90.3 % in the first second and third generation NT rabbit embryos, respectively. The fused oocytes were co-cultured with a monolayer of rabbit oviductal epithelial cells in M-199 solution containing 10 % FCS for 120 hours at 39$^{\circ}C$ in a 5% $CO_2$ incubator. The in vitro developmental potential to blastocyst stage was significantly(P<0.05) decreased in the third(7.2 %) generation NT embryos compared to the first(53.1 %) and second(16.1 %) generation NT embryos. Following in vitro development to blastocyst stage, they were stained with Hoechst 33342 dye for counting the number of blastomeres by fluorescence microscopy. The mean blastomere numbers and cell cycle numbers of NT embryos during the culture period were significantly(p<0.05) decreased in the second(93.9 cells and 6.55 cylces) and third(81.5 cells and 1.35 cylces) generation, compared to the first(189.9 cells and 7.55 cylces) generation.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.182-191
• /
• 2007

Bioabsorbable devices have been utilized and experimented in many aspects of orthopaedic surgery. Depending upon their constituent polymers, these materials can be tailored to provide sufficient rigidity to allow bone healing, retain mechanical strength for certain period of time, and then eventually begin to undergo degradation. The objective of this study was to estimate extent in which Poly-L-latic acid (PLLA) implants had bioabsorbability and biocompatibility with bone and soft tissue in dogs and also to develop bioabsorbable, biocompatible materials with the appropriate strength and degradation characteristics to allow for regular clinical use for treating orthopedic problems in humans as well as animals. Eighteen dogs were used as experimental animals and were inserted two types of PLLA implants. PLLA rods were inserted into subcutaneous tissue of back or the abdomen wall. And the rods were tested for material properties including viscosity, molecular weight, melting point, melting temperature, crystallinity, flexural strength, and flexural modulus over time. PLLA screws were inserted through cortical bone into bone marrow in the femur of the dogs and stainless steel screw was inserted in the same femur. Radiographs were taken after surgery to observe locations of screw. Histological variations including cortical bone response, muscular response, bone marrow response were analyzed over the time for 62weeks. The physical properties of PLLA rods had delicate balances between mechanical, thermal and viscoelastic factors. PLLA screws did not induce any harmful effects and clinical complications on bone and soft tissue for degradation period. These results suggest that PLLA implants could be suitable for clinical use.

• Korean Journal of Veterinary Research
• /
• v.36 no.4
• /
• pp.991-995
• /
• 1996

Renal size(length, width and height) of rabbits was measured by radiographs and nephrosonograms and compared with actual size. After measuring on the radiographs and nephrograms, both kidneys were removed from the body and actual size was also measured. On radiographs, right kidney was observed at the T13-L2 vertebrae and left kidney was at L2-L4 vertebrae. On nephrosonograms, the renal cortex was visible as small, homogenous echoes that were hypoechoic relative to the surrounding tissues, whereas the renal medulla was anechoic to slightly hypoechoic. The actual length, width and height of the left kidney were $35.84{\pm}3.12(mean{\pm}SD)$, $23.52{\pm}3.21$, $15.11{\pm}2.58cm$, respectively, whereas those of the right kidney were $36.02{\pm}3.42$, $23.69{\pm}3.50$ and $14.13{\pm}3.55cm$, respectively. On radiographs, the length and width of both kidneys were a little magnified(102-104%) when compared to actual size. On nephrosonograms, the length, width and height of bothkidneys were lessened(70-96 %) when compared to actual size. The length and width of kidney were 1.85 and 1.25 times the length of the second lumbar vertebrae on the ventrodorsal view. In correlation and correlation coefficient of body weight with the renal size, the body weight and renal size were significantly correlated with each other other(p<0.01) and the correlation coefficents of body weight with left, right and both Kindneys were 0.748, 0.794 and 0.859, respectively.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.43-51
• /
• 2017

Background/Objectives : The purpose of this study is to propose a multi-threaded web crawl using queues that can solve the problem of time delay of single processing method, cost increase of parallel processing method, and waste of manpower by utilizing multiple bots connected by wide area network Design and implement. Methods/Statistical analysis : This study designs and analyzes applications that run on independent systems based on multi-threaded system configuration using queues. Findings : We propose a multi-threaded web crawler design using queues. In addition, the throughput of web documents can be analyzed by dividing by client and thread according to the formula, and the efficiency and the number of optimal clients can be confirmed by checking efficiency of each thread. The proposed system is based on distributed processing. Clients in each independent environment provide fast and reliable web documents using queues and threads. Application/Improvements : There is a need for a system that quickly and efficiently navigates and collects various web sites by applying queues and multiple threads to a general purpose web crawler, rather than a web crawler design that targets a particular site.

• (The)Study of the Eastern Classic
• /
• no.68
• /
• pp.209-235
• /
• 2017

This study was conducted for a review of Park Se-chae's Theory of Rituals and eclectic features. He was in agreement with Song Si-yeol's allegation and Seoin's theory of rituals(西人禮論) in the 1659 controversy over propriety(己亥禮訟) and the 1674 controversy over propriety(甲寅禮訟). After that, he was cautious and criticized for Song's claims in 1683 discussion of Hyojong's sacrifices and Taejo's posthumous name. This tendency can be seen in his paper of rituals. He wrote "服制私議"(Private opinion of mourning clothes) etc. in his early life and wrote "關西昏喪契約束"(Covenant on wedding ceremonies and mourning ceremonies in the Gwanse province), "喪祭値疫痘說"(Mourning ceremonies and sacrifice when there is an epidemic) etc. in his later life. By comparing the books, we can identify changes in Park Se-chae's eclectic features. Early in life, he reviewed Gorye(古禮, Rituals of the old such as Liji) and the timely institutions(時制) on the "朱子家禮"(A book written by Zhuzi about family rituals). However, later in life, he reviewed Gorye and the Zhuzi Jiali on the timely institutions. The following is a summary of the above. His theory of rituals can be said that the eclectic features have changed from 'on Zhuzi Jiali' to 'on the timely institution'.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.31-40
• /
• 2021

Blockchain technology is also actively studied in the real estate transaction field, and real estate transactions have various ways. In this paper, we propose a model that simplifies the authentication procedure of auction systems using Ethereum's Ether to solve the problem of offline court auctions. The proposed model is written in Ethereum's Solidity language, the court registers the sale date and the sale date with the DApp browser, and the bidder accesses the address of the individual's wallet created through Metamask's private key. The bidder then selects the desired sale and enters the bid price amount to participate in the auction. The bidder's record of the highest bid price for the sale he wants is written on the Ethereum test network as a smart contract. and creates a block. Finally, smart contracts written on the network are distributed by the court auction manager to all nodes in the blockchain network, and each node in the blockchain network can be viewed and contract verified. As a result of analyzing the smart contracts of the proposed model and the performance of the system, there are fees incurred due to the creation and use of Ether on platforms using Ethereum, and participation. Ether's changes in value affect the price of the sale, resulting in inconsistent fees in smart contracts each time. However, in future work, we issue our own tokens to solve the market volatility problem and commission problem with the value change of Ether, and refine complex court auction systems.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.47-54
• /
• 2021

For the bonding of smaller PCB solder bumps of less than 100 microns, an experiment was performed to make up a tin plating solution and find plating conditions in order to produce a bump pattern through tin electroplating, replacing the previous PCB solder bumps process by microballs. After SR patterning, a Cu seed layer was formed, and then, through DFR patterning, a pattern in which Sn can be selectively plated only within the SR pattern was formed on the PCB substrate. The tin plating solution was made based on methanesulfonic acid, and hydroquinone was used as an antioxidant to prevent oxidation of divalent tin ions. Triton X-100 was used as a surfactant, and gelatin was used as a grain refiner. By measuring the electrochemical polarization curve, the characteristics of organic additives in Triton X-100 and gelatin were compared. It was confirmed that the addition of Triton X-100 suppressed hydrogen generation up to -1 V vs. NHE, whereas gelatin inhibited hydrogen generation up to -0.7 V vs. NHE. As the current density increased, there was a general tendency that the grain size became finer, and it was observed that it became finer when gelatin was added.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2022

The copper plating process used to fabricate the submicron damascene pattern of Cu wiring for Si wafer was applied to the plating of a PCB pattern of several tens of microns in size using the same organic additives and current density conditions. In this case, the non-uniformity of the plating thickness inside the pattern was observed. In order to quantitatively analyze the cause, a numerical calculation considering the solution flow and electric field was carried out. The calculation confirmed that the depletion of Cu²⁺ ions in the solution occurred relatively earlier at the bottom corner than the upper part of the pattern due to the plating of the sidewall and the bottom at the corner of the pattern bottom. The diffusion coefficient of Cu²⁺ ions is 2.65 10^-10 m²/s, which means that Cu²⁺ ions move at 16.3 ㎛ per second on average. In the cases of small damascene patterns, the velocity of Cu²⁺ ions is high enough to supply sufficient ions to the inside of the patterns, while sufficient time is required to replenish the exhausted copper ions in the case of a PCB pattern having a size of several tens of microns. Therefore, it is found that the thickness uniformity can be improved by reducing the current density to supply sufficient copper ions to the target area.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.71-78
• /
• 2023

The possibility of improving plating thickness distribution was investigated through quantitative consideration of bipolar electrodes without external power applied. By having the cathode tilted with respect to the anode, the potential distribution in the electrolyte solution adjacent to the cathode is different due to the difference in iR drop due to the path difference to the anode in each region of the cathode. The purpose of this study is to observe the bipolar characteristics in the case of an auxiliary anode for the non-uniform potential distribution of such a Hull cell. In particular, in order to evaluate the possibility of improving the non-uniform thickness distribution of the cathode by utilizing these bipolar characteristics, it was verified through experiments and simulations, and the electric potential and current density distribution around the bipolar electrode were analyzed. The electroplating in a Hull cell was performed for 75 min at a current density of 10 mA/cm², and the average thickness is about 16 ㎛. The standard deviation of the thickness was 10 ㎛ in the normal Hull cell without using the auxiliary anode, whereas it was 3.5 ㎛ in the case of using the auxiliary cathode. Simulation calculations also showed 8.9 ㎛ and 3.3 ㎛ for each condition, and it was found that the consistency between the experimental and simulation results was relatively high, and the thickness distribution could be improved through using the auxiliary anode by the bipolar phenomenon.