• Resources Recycling
• /
• v.26 no.4
• /
• pp.88-94
• /
• 2017

The recovery of gold in cyclone type electrolytic cell was conducted from solution for stripping gold of PCB by cyanide. The electrolytic recovery behaviors of gold was investigated by reaction time and addition of electrolytic sodium hypochlorite (NaOCl) and gold plating additive (KG-120). Because the electrolysis generated NaOCl reacted with the cyanide in the leachate by alkaline chlorination, more than 99% of the cyanide was removed at a $NaOCl(g)/CN^-(g)$ ratio of 1.0. When NaOCl was added during the recovery of the gold from cyanide leachate in the cyclone electrolytic cell, the recovery of gold was 98% at the ratio of $NaOCl(g)/CN^-(g)$ from 0.5 to 2.5 in 480 minutes and decreased rapidly over the ratio of 3.0. Gold was recovered more than 99% by adding 1.5 and 4.5%(v/v) of KG-120 with NaOCl in 480 minutes. In particular, when the concentration of KG-120 was 3.5 and 4.5%(v/v), more than 96% of gold was recovered within 240 minutes and the initial recovery rate was relatively faster. The optimum concentration of KG-120 is 3.5%(v/v) considering the economic feasibility and efficiency.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.79-86
• /
• 2016

About 75% of software security incidents are caused by software vulnerability. In addition, the after-market repairing cost of the software is higher by more than 30 times than that in the design stage. In this background, the secure coding has been proposed as one of the ways to solve this kind of maintenance problems. Various institutions have addressed the weakness patterns of the standard software. A new Korean programming language Saesark has been proposed to resolve the security weakness on the language level. However, the previous study on Saesark can not resolve the security weakness caused by the API. This paper proposes a way to resolve the security weakness due to the API. It adopts a static analyzer inspecting dangerous methods. It classifies the dangerous methods of the API into two groups: the methods of using tainted data and those accepting in-flowing tainted data. It analyses the security weakness in four steps: searching for the dangerous methods, configuring a call graph, navigating a path between the method for in-flowing tainted data and that uses tainted data on the call graph, and reporting the security weakness detected. To measure the effectiveness of this method, two experiments have been performed on the new version of Saesark adopting the static analysis. The first experiment is the comparison of it with the previous version of Saesark according to the Java Secure Coding Guide. The second experiment is the comparison of the improved Saesark with FindBugs, a Java program vulnerability analysis tool. According to the result, the improved Saesark is 15% more safe than the previous version of Saesark and the F-measure of it 68%, which shows the improvement of 9% point compared to 59%, that of FindBugs.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.713-722
• /
• 2013

This paper proposes a method of using depth information to detect the hand region in real-time based on the cascade method. In order to ensure stable and speedy detection of the hand region even under conditions of lighting changes in the test environment, this study uses only features based on depth information, and proposes a method of detecting the hand region by means of a classifier that uses boosting and cascading methods. First, in order to extract features using only depth information, we calculate the difference between the depth value at the center of the input image and the average of depth value within the segmented block, and to ensure that hand regions of all sizes will be detected, we use the central depth value and the second order linear model to predict the size of the hand region. The cascade method is applied to implement training and recognition by extracting features from the hand region. The classifier proposed in this paper maintains accuracy and enhances speed by composing each stage into a single weak classifier and obtaining the threshold value that satisfies the detection rate while exhibiting the lowest error rate to perform over-fitting training. The trained classifier is used to classify the hand region, and detects the final hand region in the final merger stage. Lastly, to verify performance, we perform quantitative and qualitative comparative analyses with various conventional AdaBoost algorithms to confirm the efficiency of the hand region detection algorithm proposed in this paper.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.244-254
• /
• 2009

This paper describes a remote system to monitor the circadian behavioral patterns of elders who live alone. The proposed system was designed and implemented to provide more conveniently and reliably the required functionalities of a remote monitoring system for elders based on the development of first phase prototype[2]. The developed system is composed of an in-house sensing system and a server system. The in-house sensing system is a set of wireless sensor nodes which have pyroelectric infrared (PIR) sensor to detect a motion of elder. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to caregivers (friends, family and social workers) for more cost effective intelligent care service. The improved second phase system can provide 'automatic diagnosis', 'going out detection', and enhanced user interface functionalities. We have evaluated the first and second phase monitoring systems from real field experiments of 3/4 months continuous operation with installation of 9/15 elders' houses, respectively. The experimental results show the promising possibilities to estimate the behavioral patterns and the current status of elder even though the simplicity of sensing capability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.782-792
• /
• 1999

효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.4
• /
• pp.689-696
• /
• 1997

The effects of Aralia canescens and Phellodendron amurense(AP) extracts on the experimental diabetes in ICR mice were investigated. 96male ICR mice were induced diabetes mellitus by intrape-ritoneal streptozotocin injection(75mg/kg B.W.) and divided into two injection groups which are 5 day injection and 10 day injection group. Then, each injection group was subdivided into 8 groups of 6 animals repspectively. CIC served as control and CI1, CI2 and CI3 were treated with 50, 150, 250mg/kg B.W. of AP extracts powder in 0.9% NaCl solution. Animals of groups DIC, DI1, DI2 and DI3 were strepto-zotocin-induced diabetes. DIC served as diabetic control and the rest groups received 50, 150, 250mg/kg B.W of AP extracts powder in saline solution respectively. The body weight, liver and kiney weight changes and blood levels of glucose, cholesterol and triglyceride were measured. Thiobarbituric acid reactive substance(TBARS), and glutathione reductase(GR) and glutathione peroxidase(GPx) activities were also measured for determining antioxidant effects. AP extracts increased the body weight in diabetic groups. The liver and kidney weight/100g B.W. in DIC group were greater than those of normal ICR group but after AP extracts injection, liver and kidney weight were decreased significantly. These effects were more efficient at 10 days injection group. The total, LDL, VLDL cholesterol and triglyceride levels were significantly higher in DIC group and the extent of decrement responded to AP injection dose. The contents of TBARS and antioxidant enzyme activities were relatively decreased after AP extracts injection. These results suggest that the intraperitoneally administered AP extracts may have not only hypoglycemic effect but act as antioxidants by reducing lipid peroxidation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.93-99
• /
• 2007

The study was carried out to prepare spaghetti sauce with oyster (SSO) and the food components characteristics of the SSO were also compared to those of commercial spaghetti sauces (CSS). The optimal addition ratio of oyster for preparing SSO was 11% based on 100 g of SSO according to the results of organic acid content, Hunter color value, viscosity, and sensory evaluation. The reasonable $F_0$ value for the keeping storage of SSO was about 4 min. The proximate composition of SSO prepared under the optimal processing condition was 71.2% moisture, 2.8% protein, 6.9% crude lipid, and 3.2% crude ash. The results of sensory evaluation suggested that the quality of SSO was superior to that of CSS. However, there was no significant difference (p<0.05) in sensory evaluation on color between CSS and SSO. The total amino acid content (2,532.2 mg/100 g) of SSO was higher than that of CCS (2,305.7 mg/100 g). The contents of calcium and phosphorus of SSO were 25.7 mg/100 g and 48.7 mg/100 g, respectively. The calcium content/phosphorus content showed a suitable ratio for absorbing calcium. The total free amino content and the taste value were 1,040.2 mg/100 g and 151.26, respectively. The major taste-active amino acids were glutamic acid and aspartic acid.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.23-33
• /
• 2015

This paper is results of numerical study for application of sheet pile retaining wall reinforced with H-pile as sheet piles are needed in field for a cutoff wall and are limited to use because of driveability in the ground condition of having a larger strength than a weathered rock. Extensive 101 cases of numerical approach were conducted to investigate the behavior of sheet pile retaining wall reinforced with H-pile, changing installing members of two types of sheet pile and three types of H-pile, the embedded depth of sheet pile and H-pile, the horizontal space between H-piles and excavation conditions. As the results of numerical analysis, combined use of the sheet pile SP-IIIA with H-Pile H250 and the sheet pile SP-IV with H-Pile H350 among precast products was found to be efficient since two members tended to reach allowable stresses simultaneously or have similar stress concentration ratios. Increased stiffness in reinforced sheet pile showed reduction of lateral displacement of wall. Embedded depth of sheet pile did not affect stability of wall significantly so that driving the penetrable depth of sheet pile should be enough to maintain stability of wall and satisfy purposes of cutoff and stiffness increase of wall.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.61-69
• /
• 2018

Construction projects consist of long-term on-site production, and most disciplines are featured by outdoor works. Therefore, when a process plan is established, non-working days are calculated and reflected in a process schedule to comply with the planned construction period. However, necessary information and working methods are different in the course of the work, so the method of calculation varies depending on persons even for the same site, and the result is also very different. Therefore, scientific and quantitative understanding of business information is needed. This study reconstructed non-working day estimation process by collecting and organizing the information necessary for non-working day estimation, and designed the demonstration screen based on the reconstructed process and verified through expert interview at each stage. As a result, it showed about 69% reduction of work time and reliability of 92% work information matrix, and 80% of the experts evaluated the systemization of the relevant work. This study is expected to improve the understanding of work and increase the efficiency of work performance, and the study on systemization in the future should be continued.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.576-584
• /
• 2000

The term 'greenways' is a fairly new one. The term greenways refer to linear corridors which set aside pieces of nature. The objective of this study was to find out the feasibility of developing greenways in Taegu. Sample of 446 trail users were asked to describe their use patterns and as well as their perceptions of the benefits and problems associated with trails through on-site interviews conducted during the months of July and August of 1999. Trail users in Taegu were predominately male(61%) and over half of the respondents used private vehicle to access to the study areas as compared to 2% of respondents used bicycle. Trail users responded that health & fitness and open space preservation were the two most important benefits, and the provision of trail access to disabled persons was ranked last. As problems at study areas, lack of interpretive information was the biggest problem followed by lack of drinking water, poor trail marking/signs and not enough information. Most(94.1%) of the trail users surveyed indicated that they would support greenways development and 96.8% of respondent would use after greenways development. Willingness to pay for developing greenways was assessed with hypothetical scenario. Average willingness to pay in the survey was 10,200 won as a tax. The development/application of greenways in Taegu would work best when establish a network of trails with environmentally sensitive manner.