• Korean Security Journal
• /
• no.16
• /
• pp.321-338
• /
• 2008

Soongrae-Mun Fire shows safety problem in Korea intimately. People have pressed for the responsibility of persons in charge and have asked for improvement measure whenever Fire accident occur, but similar accidents occur again without any improvement. This research is to provide improvement. measure on the base of the analysis of the cause of Soongrae-Mun fire to prevent similar accident, also to help private security company do effective security job. This research is approached from a security point of view. A lot of accidents occur by direct cause such as people's unsafe action and unsafe condition. but it is very difficult to remove the facts of direct cause, so the facts of indirect cause should be analyzed together. Drew-up of security related legislation should be included when the establishment of fire fighting related legislation is examined, also technical improvement should be examined with legislation. security company should be concerned about securing of expertise and reinvestment for the improvement of expertise to overcome limitations of private security such as job boundary, capability and responsibility. Also private security company should try to service for public benefit and to examine practical compensation for loss occurred by mistake of security company.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.31-44
• /
• 1998

The geochemical experiments were carried out to investigate a removal effect of heavy metals in abdndoned metallic mine wastes, and to conceive a treatment techniques of them. In order to prevent contamination, experiment appature was made of acrylic acid resin and polyethylene which resist to acid and alkali. Experiment models are devided into four groups based on the system environments, distribution patterns and a kind of filling materials. The first group is background model(model I ) which is filled with waste only and opened to air. The second one is four layer group which is subdivided into two models, opened and closed systems, and the third mix group which is subdivided into three models based on mixing ratio of filling materials and system environment like a layered group. The forth is composed of two layer model, lower one composed of waste and upper one limestone chips. Solution drained from Model Ishows a high contents of heavy metals on the all terms of experiments. Among the models, however, the closed mix model V and Ⅶ show the most effective removal of heavy metals liberated from wastes. Models having different mixing ratios of filling materials on closed systems does not affect in heavy metal removal effect. But, the distribution patterns of filling materials affect very much on removal effect of heavy metals. The closed models with same constitution ratios and distribution patterns of filling materials show more and less effective removal to the open models.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.691-700
• /
• 2002

Interstitial therapy using biodegradable polymeric device loaded with anticancer agent can deliver the drug to the tumor site at high concentration, resulting in an increase of therapeutic efficacy. 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) is most commonly used as chemotherapeutic agent for brain tumors. The design of implantable device is regarded as an important factor lot the efficient delivery of antitumor agent to targeting site. In order to control the release profile of drug, the release pattern of BCNU with the changes of various dimension and additives was investigated. The PLGA wafers containing 3.85, 10, 20 and 30% of BCNU were prepared in various shape (diameter of 3, 5 and 10 mm, thickness of 0.5, 1 and 2 mm) by direct compression method. In vitro drug release profile of BCNU-loaded PLGA wafers could be controlled by changing the dimension of wafers such as initial drug content, weight, diameter, thickness, volume and surface area of wafers, as well as PLGA molecular weight and additives. Drug release from BCNU-loaded PLGA wafers was facilitated with an increase of BCNU-loading amount or presence of poly(N-vinylpyrrolidone)(PVP) or sodium chloride (NaCl). The effects of various geometric factors and additives on the BCNU release pattern were confirmed by the investigation of mass loss and morphology of BCNU-loaded PLGA wafers.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.333-341
• /
• 1998

The novel integrated device, 1.55 ${\mu}{\textrm}{m}$ DR-LD(distrbuted reflector laser diode) integrated EA-MOD (electro-absorption modulator) as light source, is proposed to improve the device yield and its operational performances. This device can be easily fabricated by the selective MOVPE technique and its fabrication processes are almost the same as the reported 1.55 ${\mu}{\textrm}{m}$ DFB-LD(distributed feedback laser diode) integrated EA-MOD except the asymmetric gratings. The static and dynamic properties are investigated simultaneously by solving the transfer matrix method for light propagation, the time-dependent rate equation for carrier change and schr$\"{o}$dinger equation for QCSE (Quantum-Confined Stark Effect). The performances of the proposed device such as output power, chirp, and extinction ratio are compared with those of DFB-LD integrated EA-MOD. Under 10Gb/s NRZ modulation, we obtain that DR-LD integrated EA-MOD. is 30% higher in output power on the on-state, about 50% lower in chirp, and slightly larger in extinction ratio than DFB-LD integrated EA-MOD.-MOD.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.225-229
• /
• 2005

Microinjection of recombinant retrovirus beneath the blastoderm of non-incubated chicken embryo is now the most widespread method for generating transgenic chickens, but transgenesis rates are very low. So to improve this problem, we first introduced retrovirus vector carrying RSV-GFP gene to an one-cell embryo culture system. To investigate whether retrovirus could work on an one-cell chicken embryo, we microinjected the concentrated retrovirus stocks into the germinal disc of one cell or stage-X chicken embryos. Analysis of reporter gene expression on day 4 embryos showed that GFP expression was observed in the only stage-X chicken embryo but was not in the one-cell embryo group. These results suggest that retrovirus system is the most efficient method to generate transgenic chickens in the stage-X embryo.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.101-106
• /
• 2003

In order to study the optimum daily protein allowance for broiler breeders of 24 to 64 weeks of age on a control-fed basis, an experiment was carried out with 400 hens of Arbor Acres strain. Four levels of protein allowances were used to supply 18 to 24g of protein per day in 2g increments. As the age of hens increased, a same stepwise increase and decrease in daily energy allotment was used in all treatments. Same amount of calcium, phosphorus, methionine and lysine were supplied in all treatments and throughout laying period. Hen-day egg production was highest in hens receiving 20g protein per day(p<0.05), but there was no significant difference among those fed daily protein ranging 18 to 22g, and increasing the daily protein allotment up to 24g resulted in a significant decrease(p<0.05). Average egg weight showed a trend to increase as the daily protein allowance increase(p<0.05), but no significant difference was found among the hens fed daily protein 20 to 24g. Feed and ME conversion was superior in hens receiving 20g daily protein(p<0.05). CP conversion was increased as the daily protein allowance increase(p<0.05), but there was no significant difference between hens receiving 18 and 20g daily protein. Feed cost required per egg or per kg egg was lowest in hens fed 20g daily protein. It could be concluded that the optimum daily protein allowance was 20g in all performances.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.608-608
• /
• 2012

현재 기후변화의 기상변동성이 커짐에 따라 태풍 및 집중호우 등의 이상기후 현상이 전 지구상에 걸쳐 광역적으로 나타나고 있다. IPCC에서는 이러한 기후변화가 기온 상승에 따른 증발산량의 증가, 강수량 및 유출량의 시공간적 분포의 변동 등을 초래하여 수자원의 효율적 관리 및 안정적인 공급에 어려움을 증대시킬 것으로 전망하였다. 뿐만 아니라 현재 국내 전반에 걸쳐 4대강 사업이 진행되고 있고, 낙동강에서도 낙동강 살리기 사업이 실시되어 주변 지형들의 변화가 진행되고 있다. 이러한 지형의 변화는 현재까지 구축되어 있는 기존자료의 대폭적인 변화를 의미하므로 홍수관련 연구결과에도 변화를 의미하고 있다. 이에 따라 4대강 사업 이후의 기후 변화에 따른 낙동강유역에서의 유출량의 증가를 분석하여 극한홍수의 발생가능성을 제시하고 이러한 극한홍수발생에 따른 위험지역도 과거에 의해 변경될 것으로 판단되어 국내외적으로 하천의 수리검토에 널리 사용되고 있는 1차원 수리해석 프로그램인 FLDWAV를 이용하여 취약지점을 분석하고 위험도를 분석하고자 한다. 낙동강 살리기 사업으로 낙동강에 건설된 8개의 보를 고려한 본류 및 지류에서의 제내지 및 제외지 지형데이터를 구축하고 구축된 자료을 이용해 낙동강 본류 및 지류에 대해서 극한홍수시 200년 빈도, 500년 빈도 홍수량 및 홍수위를 FLDWAV를 통해 정상류로 계산해서 예측하고 500년 빈도 홍수량과 홍수위를 부정류로 계산하여 제방고와 홍수위를 비교하여 범람위험지역을 선정하였다. 그리고 그 결과를 통해 GIS를 통하여 범람위험지역 제내지의 주요도심 구간 포함, 범람 범위를 분석함과 동시에 극한홍수에 따른 도심구간, 비도시구간 등의 범람범위를 분석하였다. 또한 선정한 범람위험지역의 범람 피해규모를 산정하고 피해범위의 현황을 파악하였다. 연구의 결과는 다음과 같이 나타났다. 500년 빈도 홍수시 범람위험지역은 낙동강 본류의 하류부에서 각각 154.7km, 123.2km, 12.9km에 위치한 지점이 선정되었으며 각 지점의 피해규모는 제내지에 범람된 유출량의 수위는 각각 21.7m, 24.3m, 2.11m로 계산되었고 이때의 피해면적은 각각 $2.68km^2$, $2.64km^2$, $1.25km^2$로 나타났다. 이 결과는 기후변화로 인한 극한홍수 발생 가능성과 취약지점의 분석을 통한 지역의 홍수피해 저감과 정책개발에 기본 자료로 활용될 것이며 낙동강 살리기 사업으로 인한 하천주변 지형의 변화를 제공함으로서 앞으로 진행될 연구의 기본 자료로서 이용가능 할 것으로 판단된다. 또한 이전의 홍수방어계획을 개선한 새로운 홍수방어계획의 수립을 통하여 향후 발생될 홍수의 예방 및 대응방안 수립의 참고자료로 이용될 것이며 제내지 및 제외지의 공간확보 연구를 통해 해당 지자체의 토지매수계획의 참고자료로 이용 가능할 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.44 no.1
• /
• pp.51-64
• /
• 2011

The objective of this study is to develop a continuous rainfall-runoff model for flood prediction on a large-scale basin. For this study, the hourly surface runoff estimation method based on the variable retention parameter and runoff curve number is developed. This model is composed that the soil moisture to continuous rainfall can be simulated with applying the hydrologic components to the continuous equation for soil moisture. The runoff can be simulated by linking the hydrologic components with the storage function model continuously. The runoff simulation to large basins can be performed by using channel storage function model. Nakdong river basin is selected as the study area. The model accuracy is evaluated at the 8 measurement sites during flood season in 2006 (calibration period) and 2007~2008 (verification period). The calibrated model simulations are well fitted to the observations. Nash and Sutcliffe model efficiencies in the calibration and verification periods exist in the range of 0.81 to 0.95 and 0.70 to 0.94, respectively. The behavior of soil moisture depending on the rainfall and the annual loadings of simulated hydrologic components are rational. From this results, continuous rainfall-runoff model developed in this study can be used to predict the discharge on large basins.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.593-593
• /
• 2012

본 연구는 화력 및 원자력 발전소로 취입된 냉각수(circulating and essential service water)가 복수기로부터 온배수 형태의 개수로 흐름으로 표층배수 될 경우 수온을 저감시키기 위해 주입하는 희석수(by-pass cooling water)와의 혼합효과의 효율성을 증대시키고, 불리한 수리현상을 야기하지 않으며, 경제적인 배수로 구조물을 고찰하기 위한 목적으로 시도되었다. 배수로 구조물 내 온배수와 희석수가 혼합되는 구간을 혼합지(mixing basin)라 하는데, 본 과업에서는 ${\bigcirc}{\bigcirc}$발전소의 배수로 구간 중 혼합지를 대상으로 FLOW-3D$^{(R)}$를 이용한 3차원 수치모형을 구축하고, 총 9개에 해당하는 각 대안별 현상을 분석하고 비교하였다. 각 대안들의 차이점은 배수로에 설치되는 보조구조물들의 형상과 배열 등이며, 복수기로부터 나오는 배출수의 수온은 $42^{\circ}C$, 희석수는 $35^{\circ}C$이고, 본 과업의 주요 관심대상 물리량은 유속과 온도이다. 배수로에 아무런 보조 구조물이 없는 형태인 기본 계획안을 검토한 결과, 평균 $3.31^{\circ}C$의 수온강하가 이루어졌으나, 우안 쪽으로 강한 흐름이 발생하여 수온의 좌우편차가 $4.61^{\circ}C$ 가량 발생하는 것으로 나타났다. 기본 계획안의 검토결과를 보완하기 위한 대안으로 연직 흐름의 소산을 위해 고안된 잠형 소파블록(baffle block) 설치안은 평균 $3.06^{\circ}C$의 수온강하가 이루어지고 $4.44^{\circ}C$의 수온 좌우편차가 발생했다. 지그재그(zigzag) 형태의 흐름을 만들어 혼합효과를 올리기 위한 미로형 수제(labyrinth groin) 설치안은 평균 $5.33^{\circ}C$의 수온강하가 이루어지고, $1.43^{\circ}C$의 수온 좌우편차를 보여줘 검토했던 대안들 중 가장 좋은 결과를 보여주었다. V자 배열 소파블럭(deformed block) 설치안은 연직 및 수평방향의 소산을 기대했으나 평균 $3.00^{\circ}C$의 수온 강하와 $4.41^{\circ}C$의 수온 좌우편차를 나타냈다. 벤츄리(Venturi) 형태의 흐름을 발생시키기 위한 병목형(bottleneck) 수로안은 평균 $3.18^{\circ}C$의 수온강하와 $3.94^{\circ}C$의 수온 좌우편차, 흐름의 소산과 흐름방향을 변화시키기 위한 와형 수제(swirl groin) 설치안은 평균 $2.24^{\circ}C$의 수온강하와 $1.48^{\circ}C$의 수온좌우편차, 우안 흐름을 지연시키기 위한 물방석(water cushion) 수로안은 평균 $3.03^{\circ}C$의 수온강하와 $4.50^{\circ}C$의 수온 좌우편차, 우안의 흐름을 좌안으로 보내기 위한 분사형(injector) 수로안은 평균 $3.13^{\circ}C$의 수온강하와 $4.45^{\circ}C$의 수온 좌우편차, 우안의 흐름을 막기 위한 외팔형 수제(cantilever groin) 설치안은 평균 $3.11^{\circ}C$의 수온강하와 $3.02^{\circ}C$의 수온 좌우편차가 발생하는 것으로 나타났다.