• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.611-623
• /
• 2007

The H.264|AVC standard incorporates an intra prediction tool into inter frame coding. However, this leads to excessive amount of increase in encoding time, thus resulting in the difficulty in real-time implementation of software encoders. In this paper, we first propose an early decision on intra prediction coding and a fast intra prediction method using the characteristics of block contents and the context of neighboring block modes for the intra prediction in the inter frame coding of H.264/AVC. Basically, the proposed methods determine a skip condition on whether the $4{\times}4$ intra prediction is to be used in the inter frame coding by considering the content characteristics of each block to be encoded and the context of its neighboring blocks. The performance of our proposed methods is compared with the Joint Model reference software version 11.0 of H.264|AVC. The experimental results show that our proposed methods allow for 41.63% reduction in the total encoding time with negligible amounts of PSNR drops and bitrate increases, compared to the original Joint Model reference software version 11.0.

• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.120-126
• /
• 2000

The quality of oak mushoom(Lentinus edodes(Berk) Sing) is sensitively affected by environmental factors, especially moisture by the rain during the growing period. To protect mushrooms from being wet, plastic-covered facilities with side openings are mostly being used. However, the indoor temperature and humidity f the facility without roof opening become higher due to its poor ventilation, and consequently reduce the productivity and quality as well. In this study, we analyzed the ventilation rates and indoor temperatures of improved facilities as affected by the area of roof opening and shading rate by the model. The indoor temperature decreased by more than 2.5$^{\circ}C$ as the shading rate increased from 50% to 90%, and especially the effect of wind speed on indoor temperature was significantly great under as low as 50% of shading rate. The ventilation rate became higher under wind speed of 1~2m.s-1 regardless of the shading rate. As the wind speed increased from 0m.s-1 to 2m.s-1, the indoor temperature decreased by more than 2.$0^{\circ}C$. Moreover, the indoor temperature became lower with increasing roof opening ratio, but showed no significant differences at more than 50% of roof opening ratio. At lower shading rate, the indoor temperature sensitively decreased with increasing area of roof opening. Additionally, we obtained the higher ventilation performance with the area of roof opening more or less equal to side opening, regardless of the wind speed and shading rate.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.23-26
• /
• 2005

Introduction: To evaluate whether modified MUPIT applicator can effectively eradicate recurrent tumor in uterine cervix cancer and reduce rectal complication after complete radiation treatment. Methods and Materials: Modified MUPIT applicator basically consists of an acrylic cylinder with flexible brain applicator , an acrylic template with a predrilled array of holes that serve as guides for interstitial needles and interstitial needles. CT scan was performed to determine tumor volume and the position of interstitial needles. Modified MUPIT applicator was applied to patient in operation room and the accuracy for position of interstitial needles in tumor volume was confirmed by CTscan. Brachytherapy was delivered using modified MUPIT applicator and RALS (192-Ir HDR) after calculated computer planning by orthogonal film. The daily dose was 600cGy and the total dose was delivered 3000cGy in tumor volume by BID. Rectal dose was measured by TLD at 5 points so that evaluated the risk of rectal complication. Result: The application of modified MUPIT applicator improved dramatically dose distributions in tumor volume and follow-up of 3 month for this patient was clinically partial response without normal tissue complication, Rectal dose was measured 34.1cGy, 57.1cGy, 103.8cGy, 162.7cGy, 165.7cGy at each points, especially the rectal dose including previous EBRT and ICR was 34.1cGy, 57.1cGy Conclusion: Patients with locally recurrent tumor in uterine cervix cancer treated with modified MIUPIT applicator can expect reasonable rates of local control. The advantages of the system are the fixed geometry Provided by the template and cylinders, and improved dose distributions in irregular tumor volume without rectal complication

• Journal of Korea Technology Innovation Society
• /
• v.12 no.1
• /
• pp.189-211
• /
• 2009

The importance of searching the weak signal has been increasingly recognized to cope with rapidly changing circumstances as an environmental analysis technique. This study proposed the NEST process for the searching for the weak signal. The NEST (New & Emerging Signals of Trends) is a micro environmental analysis process based on both quantitative and qualitative method. For this, the weak signal Searching Board is developed and traditional methods as global monitoring, trend analysis, brainstorming and delphi method are implemented to NEST. The NEST process is consists of three stage modules; the global monitoring stage in search of seeds information related to the environmental change, the weak signal analysis stage using the weak signal Tracking Board, and the delphi valuation stage for objectifying the final result. The NEST provides the weak signal of the promising technology which can bring new paradigm and the Up-Coming Trends which can lead new trend in the future. These outputs can be used to select promising technology from firm level to national level. The NEST system can be effectively operated as well as in small group so that small and medium innovative firms can develop and execute their own NEST process individually.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.1
• /
• pp.1-35
• /
• 2009

This study analyzes the current status of how to manage the national R&D program and the systematic problems of R&D planning, evaluation, and management, and then shows the strategy to support special agency of national R&D management for effective operation. Additionally, this study seeks to search for the macro methods to coordinate and to develop the roles and functions of special agency of national R&D management, and to promote efficiency and productivity of the National R&D investment. First of all, this study generally introduces the national R&D and surveys each special agency of national R&D management by analyzing the status of each agency charged by Ministry. Also, this study defines special agency of national R&D management by investigating each agency's status based on law and finds out the strategy to support special agency of national R&D management for effective operation. Each special agency of national R&D management is based on acts, administrative orders, or blanket contracts and takes whole charge of each National R&D program. The organization forms of special agency of national R&D management can be classified into two forms: One is a form to plan, to evaluate, and to manage the National R&D program and other is a form to research program together with the functions of planning, evaluation, and management. Therefore, this study defines special agency of national R&D management as "an organization, having a legal basis(acts, administrative orders), funded and charged by government for executing R&D planning, evaluation and management of R&D program." This study shows the strategy to operate special agency of national R&D management efficiently by analyzing each agency's current status and comparing each agency with each other. Moreover, every agency has a committee member pool, and the pool is classified well according to the fields of work and technology. Also, the special agency of national R&D management has its own organization to manage performances of program.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.4
• /
• pp.171-175
• /
• 2011

Server and Pi view management, external image and internal image Copy Import business in PACS room is through the medical assistance. Import and Copy, and in particular the number of cases is increasing the number of import is a fast growing trend. Although the increase in workload With limited human resources to increase business efficiency so Remote system is using PACS room. This remote system will want to evaluate the effectiveness of using the service. Amount of data each 437.5 MB, Copy and Import time is to compare and evaluate sees by use 1 PC. 4 PC, 4 PC+ remote system. The use of the remote system before the January 2010 to June daily average waiting time and the use of the remote system after the January 2011 to June compared to a daily average patient waiting time, evaluate. Using the remote system in January 2011 to June Find out the average remote utilization. The biggest difference on the four copy and eight continued, Were performed two times faster by use 4 PC+ remote system than use 4 PC and four times faster than use 1 PC. Before using the remote system, the daily average wait time is 14.5 minutes after using the daily average 10.2 minutes, waiting time 30% of the existing waiting time was 4.3 minutes, to reduce. Using the remote system in January 2011 to June the average daily number of cases is 107 number and The number of remote and on average 35 cases with 32% in a day remote usage. The use of the remote system to Import, CD Copy and greatly increase the efficiency of their time could be. Hours due to efficiency could also reduce customer waiting time. As a result, the manpower and the use of a remote system over time to maximize efficiency in business hours, work was evaluated by.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.91-99
• /
• 2008

When making a comic film, the comic presentation that uses stress and exaggeration is the important subject among other things. In this study we tried to investigate the comic effect using the movement of three-dimensional shot. To conduct this study, we extracted the shot manufactured through the Flow Motion of a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. The shot manufactured applying this manufacturing skill and using three-dimensional production method for the video contents efficiently made was classified into several scenes. The focus of this study is to search for the factor that makes the atmosphere of a story comic through three-dimensional production shot. According to the shot analysis, three-dimensional production method plays a role in developing more stories on space and time by visualizing stories in three dimensions, which makes the most use of the movement of camera, lens and the utilization of focus. In addition, in the presentation where many comic and exaggerated factors are provided, we used the technology that stresses a scene using the size of a shot and the lasting time and presented the method that exaggerates space using a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. By reviewing the qualitative improvement and the efficient method on making comic films through the possibility that the atmosphere of this three-dimensional shot can apply to the effect for comic presentation, we tried to approach the comic presentation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.158-167
• /
• 2017

This paper presents the technology rating methodology that is applicable to defense R&D technology. First, a technology profitability index was developed using multiple regression analysis to forecast the revenue from technology transfer. Secondly, the technology evaluation index was derived using hierarchical analysis with expert opinion. Finally, the weighted average of the technology profitability index and technology evaluation index were calculated to derive the technology rating. This study is significant in that it is first attempt to evaluate defense R&D technology by rating. If the defense R&D technology rating methodology is applied in practice, it can contribute to efficient R&D budget allocation. In addition, it will help in the vitalization of technology transfer in the defense R&D sector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.443-449
• /
• 2017

The imbalance of air supply and the exhaust on subway platforms has led to the installation of platform screen doors in underground subway stations. This imbalance causes the accumulation of pollutants on the platform and loss of comfort due to the lack of ventilation. In this study, a floor exhaust system was optimized using computational fluid dynamics (CFD) and an optimization program. The optimized floor exhaust system was manufactured and tested experimentally to evaluate the particle collection efficiency. CFX 17.0 and HEEDS were used to analyze the flow field and optimize the principal dimensions of the exhaust system. As a result of the three-step optimization, the optimized floor exhaust system had a total height of 1.78 m, pressure drop of 430 Pa, and particle collection capability of 61%. A fine dust particle collection experiment was conducted using a floor exhaust system that was manufactured at full scale based on the optimized design. The experiment indicated about 65% particle collection efficiency. Therefore, the optimized design can be applied to subway platforms to draw in exhaust air and remove particulate matter at the same time.