• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.147-162
• /
• 2020

The purpose of this study is to present practical improvement plans for policy fund support in national policy banks through an analysis of the efficiency of policy fund support. It targets small and medium-sized enterprises(SMEs) that received policy funding from national policy banks in '17 and '18 consecutively. As for the analysis method, characteristic analysis and corresponding sample T-test was performed. The analysis results are as follows. First, as a result of analyzing the characteristics of small and medium-sized enterprises, most of the financial funds were concentrated on the manufacturing industry. By region, the western region of Gyeonggi Province, by credit rating, was A grade, technology grade was T5, and the use of funds was mostly concentrated on facility funds. Second, as a result of efficiency analysis, profitability had a positive effect on total capital return, stability had a positive effect on interest compensation ratio, and activity had a positive effect on total capital turnover. In conclusion, it is expected to provide practical improvement plans to support policy funds to influence the growth and distribution of funds appropriate to the needs of SMEs.

• Clean Technology
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2008

In order to choose alternative environmental-friendly cleaning agents, it is very important in the present point that the systematic selection procedures should be introduced and applied to the industry through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. Thus, a novel cleaning evaluation method utilizing optically stimulated electron emission (OSEE) among various methods of cleaning ability was studied in this study. The contaminants used in this cleaning experiments were flux, solder, grease, cutting oil, and mixed soil of 35% grease and 65% cutting oil. The cleaning agents developed or prepared in our laboratory were employed and their cleaning ability were comparatively evaluated by the OSEE, gravimetry and contact angle methods. The experimental results in this work showed that flux cleaning efficiency measured by the OSEE method was similar to that of the gravimetric method, but that the OSEE method could not be compared with gravimetric method for the case of solder or grease cleaning because the contaminants radiate or absorb ultra-violet light. In case of cutting oil cleaning, the gravimetric method indicated its limitation of cleaning efficiency of cutting oil since it showed cleaning efficiency of 100%, even though residual soil remaining on the substrate surface a little after its cleaning. The comparative experimental results of cleaning ability evaluated by the OSEE- and contact angle measurement methods showed that they were similar in case of cleaning of flux, mixed soil and cutting oil. It was judged that the contact angle measurement method could evaluate the cleaning ability more precisely than the OSEE method for cleaning solder and grease.

• The KIPS Transactions:PartD
• /
• v.19D no.3
• /
• pp.221-228
• /
• 2012

This paper proposes a new forging work-in-process control system that guarantees independency of a specific device and provides cost-effectiveness. Until now, much research has been studied on improving the process productivity through efficient work-in-process or inventory controls. Especially, incorporating various IT technologies such as barcode, RFID, and image recognition has been done. However, those approaches cause many problems due to the characteristics of the forging work-in-process control environment. To overcome the limitations of the existing approaches, this paper proposes a novel forging work-in-process control system. The proposed system in this paper identifies and precisely manages positions of objects by using GPS information of smart mobile devices. Therefore, identification tags as well as specific devices for reading the tags do not been required. It resolves the problems of the previous approaches and enhances the productivity of the overall forging work-in-process control process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1225-1230
• /
• 2010

본 연구는 군부대 사격장의 중금속 오염토양에 대하여 생물학적 용출기술(BT)과 전기동력학적 기술(ET)의 통합공정의 적용성 평가 연구에 대한 것이다. 사격장 오염 토양의 경우 사격에 의해 탄두가 피탄지에 박히면서 오염토양 내에 잔존하여 탄두를 구성하는 주성분인 납과 구리 등에 의해 지속적인 오염원으로 작용하는 특징을 가진다. 따라서 사격장 토양오염정화를 위해서는 이 탄두를 물리적으로 선별하는 물리적 선별공정을 전처리공정으로 수행한 후 인공적으로 조성된 셀에 통합공정 적용성 평가를 위한 현장실증시험을 수행하였다. 생물학적 용출을 통해 토양내 잔류하는 중금속을 이온화시켜 이동성을 크게 한후 전기동력학적 기술을 통해 토양내에서 전해질로 이동시켜 최종적으로 전해질을 처리하는 시스템으로써 공정 모니터링결과 납과 구리 모두 주목할 만한 제거효율을 얻을수 있었다. 오염물질별 공정 적용성 평가결과 납의 경우 황산화박테리아에 의해 이온화가 되지만 황산화박테리아의 생장 부산물인 황산염이온(${SO_4}^{2-}$)과 반응하여 안정성이 큰 Anglesite($PbSO_4 $)를 형성하므로 전체적인 제거효율이 저하되는 것을 확인하였고 기타 미생물을 이용한 생물학적 용출기술 연구의 필요성을 확인하였다. 구리의 경우 황산염박테리아를 이용한 생물학적 용출공정 및 전기동력학적 처리공정의 통합공정을 통해 주목할 만한 제거효율을 얻을수 있었으며 통합공정의 효율성을 확인할 수 있었다. 본 연구를 통하여 미생물학적 용출기술과 전기동력학적 기술의 통합공정은 현장특이성(Site-specific) 확인후 적용가능성이 있음을 확인하였다.

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.7-21
• /
• 2007

The purpose of this study is to examine the transportation, equity and efficiency impacts of cordon pricing schemes in the Seoul Capital Region of Korea. Autos would be required to pay a toll of 2.000 Won each time they enter cordons around the CBD or the subcenters during morning peak periods. The imposition of the toll would produce a substantial decrease in traffic volumes within the cordons as well as throughout the Capital Region. The lower the income level of commuters is, the more the share of auto decreases and that of transit increases. For equity impacts, the welfare of commuters would increase or decrease according to the cordon pricing schemes but would produce progressive impacts irrespective of the schemes. However, the commuters who have the highest value of time would experience welfare gains and it would result in regressive impacts. The schemes would result in a substantial net social welfare gain for the efficiency impacts. When the toll is charged at the CBD cordon only, the net social welfare would increase more.

• Journal of Technology Innovation
• /
• v.21 no.3
• /
• pp.41-72
• /
• 2013

In this study, a comparison has been made among the countries regarding recent ICT practices being performed based on the measures of relative efficiency and productivity growth that use multiple inputs and outputs. Efficiency measures a country's ICT performance relative to a benchmark at a given point of time and productivity measures a country's performance over a period of time. An output-oriented Data Envelopment Analysis and Malmquist Index has been used for comparison among 28 countries over the period 2008-2011 by incorporating 9 variables. The empirical findings disclose gross inefficiencies in national ICT practices, which show that there is room for enhancing output gains through increased efficiency in their operations. In addition, 13 countries have performed better than others in total factor productivity mainly because of their improvement in the underlying technological progress in ICT. For those technically inefficient countries, however, technical inefficiency may hamper the growth of total factor productivity of ICT practices.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.105-113
• /
• 2008

While the wireless sensor network has a strong point which does not have effect on whole activities of network even though neighboring sensor nods fail activities of some sensor nod or make some functions disappear by the characteristic of similar information detection, it has problems which is slowing down of wireless medium, transfer character with severe error, limited power supply, the impossibility of change by optional arrangement of sensor nods etc. This paper proposes PRML techniques which performs the fittest course searching process to reduce power consumption of entire nods while guarantees the scalability of network organizing sensor nods hierarchically. The proposed technique can scatter the load of cluster head by considering the connectivity with surplus energy of nod and reduce the frequency of communication among the nods. As a result of the analysis in comparison with LEACH-C and HEED technique, PRML technique get efficiency of average 6.4% in energy consuming respect of cluster head, efficiency of average 8% in entire energy consuming respect, and more efficiency of average 7.5% in other energy consuming distribution of network scalability than LEACH-C and HEED technique.

• Journal of Aquaculture
• /
• v.7 no.3
• /
• pp.177-187
• /
• 1994

The objective of the present study were to evaluate nitrification characteristics and determine optimum treatment conditions of three phase fluidized bed reactor for recycling water treatment of aquaculture. When the loading rates were 2.739-0.086kg $COD/m^3/day$ and 1.575-0.128kg $NH_4\;^+-N/m^3/day$, COD and ammonia removal efficiencies were $56.3-94.7\%\;and\; 67.3­92.6\%$, respectively. The maximum removal rates of COD and ammonia were 1200mg/l/day and 488mg/l/day, respectively. Ammonia removal rates were more than $90\%$ beyond 1hr HRT. The ammoniaremoval efficiency was sensitive to the variation of media concentration and air flowrate.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.98-107
• /
• 2022

The purpose of this study is to suggest a model for evaluation of a risk based value index for modular design alternatives in plant construction projects. Accordingly, 1) Setting the basic project cost and the scope to apply the module, 2) Evaluating the importance, easiness, and effectiveness index for Engineering, Procurement, Fabrication, transportation, and construction work, 3) Estimating the total project cost by analyzing the risk reserve Step, 4) Comparing the effectiveness index and total project cost for each modular design alternative, it was composed of the steps of deriving RVI. To verify such a model, Plan-A, which applied a module to one process, and Plan-B, which applied a module to three processes, were composed to evaluate RVI.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1060-1070
• /
• 2022

With the development of information technology, the size of the system has become larger and diversified, and the existing role-based access control has faced limitations. Blockchain technology is being used in various fields by presenting new solutions to existing security vulnerabilities. This paper suggests efficient role-based access control in a blockchain where the required gas and processing time vary depending on the access frequency and capacity of the storage. The proposed method redefines the role of reusable units, introduces a hierarchical structure that can efficiently reflect dynamic states to enhance efficiency and scalability, and includes user-centered authentication functions to enable cryptocurrency linkage. The proposed model was theoretically verified using Markov chain, implemented in Ethereum private network, and compared experiments on representative functions were conducted to verify the time and gas efficiency required for user addition and transaction registration. Based on this in the future, structural expansion and experiments are required in consideration of exception situations.