• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.111-111
• /
• 2012

나노테크놀로지는 종래의 가공으로는 얻기 힘들었던 섬유가공 효과를 간단하게 할 수 있는 기술이다. 현재 각국의 기능성 나노 가공제를 섬유에 응용하는 나노 테크놀로지는 현재 공업 생산되고 있는 면, 모, 견 등의 천연섬유 및 polyester, Nylon 등의 합성섬유의 원단에 적용하는 데서 출발하고 있다. 이러한 나노기술은 기존의 설비와 물을 사용하는 것이 큰 특징이고, 특별한 기계장치가 필요하지 않으며, 소규모의 실험장비만 있어도 현장투입이 가능한 나노입자의 제조가 가능하기 때문에 대량생산이 용이하고 설비투자는 원칙적으로 필요하지 않는다. 또한, 나노입자의 분산을 제대로 시키면 그 사이즈가 빛의 가시광선 영역의 파장(400~800nm)에 비해 절반 수준이하 크기의 입자가 대부분을 차지하기 때문에 염색성, 태의 변화가 적어 앞으로 더욱더 나노테크놀로지에 의한 가공이 확대될 것이 예상된다. 특히 유 무기 하이브리드 재료는 용액상태에서 제조되기 때문에 용액 코팅공정의 적용이 가능하여 다양한 코팅에 적극적으로 활용되고 있다. 또한 코팅공정 온도가 상대적으로 낮아서, 유기물의 기능성 발현이 용이하며, 섬유가공에 그대로 적용이 가능하고, 섬유고분자와 내구성 있게 직접 결합이 되어 실용성이 높다 할 수 있다. 또한 나노졸의 형성 시, 혹은 나노졸에 기능성 물질을 첨가함으로서 나노졸과 기능성 물질을 복합화하여 섬유상에 부여하는 것도 가능하다. 최근에 실리카졸의 형성과 성장에 관한 연구는 졸-겔 기술의 발전과 해석 및 상용화에 집중되어 있다. 규산나트륨과 황산 또는 염산을 사용하여 실리카를 생성하는 공정은 tetraethoxysilane (($Si(OC_2H_5)_4$, (TEOS))를 이용하여 합성하는 방법과 달리 대량의 실리카를 경제적으로 생산하는데 방법으로 널리 연구되고 있지만, 많은 연구가 수행되었음에도 불구하고 실리카 졸의 특성, 성장, 제조에 대한 충분한 이해가 이루어 지지 않고 있어, 아직까지 나노크기의 입자를 제조하는 공정에 대해서는 경제성, 효율성, 품질의 균일성이 떨어지는 것이 현실이다. 따라서 본 연구에서는 앞서 연구된 졸-겔 합성기술과 저렴한 원료인 규산나트륨을 이용하여 보다 간단하고 경제적인 방법으로 고부가가치의 다양한 실리카 나노졸을 제조할 수 있는 연구를 하고자 하였다. 이를 위해 규산나트륨 수용액의 특성, 핵 생성에 필요한 규산나트륨 수용액의 산화반응 특성, 그리고 출발용액의 졸겔 반응을 기초로 하여 실리카 졸 형성에 대한 반응물질의 혼합방법, 반응온도, 반응물의 농도, pH등이 최종 실리카 나노졸 제품의 입자 크기와 모양 등에 미치는 영향을 조사하려고 하며 이를 토대로 다양한 크기와 특성을 가진 실리카 나노졸을 제조하였다.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.58-64
• /
• 1982

The fresh threshed paddy-mat dryings on the various environments were analyzed on their drying characteristics and rice quality resulted. The moisture content of paddy was mainly determined by the accumulated solar energy received, and which was expressed as a simple equation. The drying characteristics revealed to follow a constant rate drying type, and as the depth increased the more typical constant-rate drying pattern was observed. The relationship between the drying rate and bed depth was established with a simple exponential equation. The raking operation during the drying period showed a favorable effect both on the drying rate and the reduction of crack formation. Drying environments such as straw mat, concrete, ground, polyethylene film did not affect significantly the drying rate and rice quality. Considering the drying rate and quality, the optimum bed depth of mat paddy drying was around 6 cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.58-65
• /
• 2020

3D Models of offshore plant piping materials designed by 3D CAD systems are provided to the production processes in the form of 2D piping drawings and 2D piping installation drawings. In addition to the standard engineering information, the purchasing, procurement, manufacturing, installation, and inspection of raw materials are managed systematically in an integrated process control system. The existing integrated process management system can help reduce the processing time by managing the flow and progress of resources systematically, but it does not include 3D design model information. Hence, it is difficult to understand complicated pipe structures before installing the pipe. In addition, when design changes or immediate design modifications are required, it is difficult to find related data or exchange information quickly with each other. To solve this problem, an offshore plant-piping process-monitoring system was developed based on a 3D model. The 3D model-based piping monitoring system is based on Visual Studio 2017 C# and UNITY3D so that the piping-process work information can be linked to the 3D CAD model in real time. In addition, the 3D model could check the progress of the pipe installation process, such as block, size, and material, and the progress of functional inspection items, such as cleaning, hydraulic inspection, and pneumatic inspection.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.469-475
• /
• 2016

The study is the result of an practical operation analysis for the full scale fishery product wastewater treatment plant with immersed MBR (iMBR) process. Since fishery product industries show a wide range of wastewater generation by the season, design and operation of the equalization basin are very important factor. The aeration system for the equalization basin mixing can save the chemical consumption for followed system through the restriction of acid fermentation. The concentrations of wastewater primary DAF process treated were BOD 2,291 mg/L, $COD_{Mn}$ 530 mg/L, SS 256.8 mg/L, T-N 38 mg/L, T-P 13.5 mg/L respectively. It was considered that iMBR is the most efficient biological process for high salinity content wastewater since It is irrelevant to the capability of the sludge precipitation. SADp and SADm were 0.31, $26.5m^3/hr{\cdot}m^3$ respectively. In iMBR process, the critical F/M ratio was derived at 0.08~0.10 gBOD/gMLSS by analysing the correlations between MLSS, normalized TMP and temperature. The effluent concentrations were BOD 1.8 mg/L, $COD_{Mn}$ 12.4 mg/L, SS 1.0 mg/L, T-N 7.85 mg/L, T-P 0.1 mg/L and removal efficiencies were 99.9%, 97.6%, 96.3%, 95.7%, 97.8% respectively.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.29-37
• /
• 2016

With the emergence of SNS, TV, newspapers and radio, which are one-way communication media, have become less important. Therefore social networking enables social networking beyond the constraints of time and space, and communication and emotional communication required for social relations have emerged as a factor in the importance of social media. Social media, which is based on rapid connectivity and scalability, is an medium of expression that is advantageous for companies and consumers to communicate more easily than traditional advertising media. Advertising can form a consensus that consumers and companies can create an atmosphere of friendly conversation because of the social media that has the efficiency of communication. This study compares two ads. One is the advertisement of 'Bear and Hare', an animation of John Lewis department store in the UK, where a new form of advertising marketing strategy is fused with emotional storytelling and social media. The second is an advertisement of LG, 'I love you LG' to be. Social media should be remembered as a warm and loving company in the heart of customers through open communication with customers, rather than companies that pursue merit profits by using social media ads as a medium of emotional transmission to consumers. It is a study on useful advertising strategy that can pursue the sales of the company at the same time.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2016

This paper was studied in two ways with respect to the information received from the video signal separation technique of PPI Scop radar device. The proposed technique consists in generating an image signal through the video signal separation and synthesis, symbol generation, the residual image signal generation process. This technology can greatly improve the operating convenience with improved ease of discrimination, screen readability for the operator in analyzing radar information. The first proposed method was constructed for high-speed FPGA-based information processing systems for high speed operation stability of the system. The second proposed method was implemented intelligent algorithms and a software algorithm function curve associated resources.This was required to meet the constraints on the radar information, analysis system. Existing radar systems have not the frame data analysis unit image. However, this study was designed to image data stored in the frame-by-frame analysis of radar images with express information MPEG4 video. Key research content is to highlight the key observations expresses the target, the object-specific monitoring information to the positive image processing algorithm and the function curve delays. For high-definition video, high-speed to implement data analysis and expressing a variety of information was applied to the ARM Processor Support in Pro ASIC3.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.359-371
• /
• 2017

This study generated flood time series of ungauged catchments in the Andongdam catchment using a distributed rainfall-runoff model and data generation method, and extracted the peak flows of 50 catchments to investigate the effect of rainfall spatial variability on peak flow simulation. The model performance statistics for three gauged catchments were reasonable for all events. The flood time series of the 50 catchments were generated using distributed and mean rainfall time series as input. The distribution of the peak flow using the mean rainfall was similar or slightly different to that using the distributed rainfall when the distribution of the distributed rainfall was nearly uniform. However, the distribution of the peak flow using the mean rainfall was reduced significantly compared to that using the distributed rainfall when actual storms moved to the top or bottom of the study catchment, or the rainfall was randomly distributed. These cases were 35% of total number events. Therefore, the spatial variability of rainfall should be considered for flood simulation. In addition, the power law relationship estimated using the peak flow of gauged catchments cannot be used for estimating the peak flow of ungauged independent catchments due to latter's significant variation of the peak flow magnitude.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.388-393
• /
• 2003

도시화 속도의 증가와 더불어 3차원 자료 획득의 출처가 다양해지연서, 도로 및 건물경계선과 같은 선형 GIS 정보에 대한 신속한 갱신 또한 요구되고 있다. 임의의 출처 자료로부터 대상 자료를 갱신하기 위해서는 가장 먼저 두 자료간의 위치 관계를 결정하여야 하며, 특히 영상정보와 같은 출처 자료와 GIS 자료와 같은 대상 자료간의 위치 관계를 결정하기 위하여 기존에 제시되어온 대부분의 방법들은 두 개 자료간의 관계를 정의 할 수 있는 기준정과 같은 정확한 점 정합 요소(point matching entities)를 요구하고 있다. 따라서 정확한 정합 요소들을 획득할 수 없는 경우 영상과 GIS 자료간의 위치 관계를 결정할 수 없을뿐더러 위치 관계 정립의 결과는 정합 요소들의 분포 및 정확도에 매우 의존하게 된다. 또한 이러한 점 정합 요소들을 정의하기 위해서는 대부분의 경우 수동적으로 이루어질 수밖에 없다. 따라서 본 연구에서는 영상 및 GIS 자료의 선형 정보를 이용하여 정확한 점 정합 요소들을 모르더라도 영상과 GIS 자료간의 위치 관계를 결정할 수 있는 기법을 제시하고자 한다. 사용된 알고리즘은 개선된 Hough 변환(Modified Hough Transform)을 기반으로 다수의 선형 정보 중에 정합되는 요소들을 자동으로 찾아내고 이들을 최소제곱법으로 풀이함으로써 두 데이터간의 기하학적 변환 관계를 결정하는 기법이다. 본 연구에서는 이와 같은 접근을 통해 데이터간의 기하학적 변환 관계를 결정한 후, 영상 상에는 존재하지만 GIS 자료에는 존재하지 않는 선형 정보에 대한 갱신 여부를 확인하고 갱신함으로써 3차원 위치 자료의 자동 생성에 대한 가능성을 제시하고자 한다.로 갈수록 퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of th

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.169-177
• /
• 2017

Rather than causing damage from heat, blast, and radiation of a regular nuclear weapon, recently, it is predicted that North Korea has been inventing high altitude electromagnetic pulse (HEMP) missile in order to incapacitate electronic equipment. HEMP shielding facility is used for military purpose today. Despite the electromagnetic shielding effects from high quality compression plates, problems may include such as the possibility of electromagnetic influx resulting in the welding of the compression plates, and difficulties and high cost of construction. Therefore, in this study, a high electrical conducting material was added to the concrete experimental subject to ensure the shielding effect through electromagnetic waves to for the concrete structure, instead of building a shielding facility separately for the structure. Also, among the experimental subjects, 100 ${\mu}m$ of Iron-Aluminum alloy metal spraying coat was applied to two types with the highest shielding effect, and to two types with the lowest shielding effect. The result of the experiment indicates that experimental subjects added with a high electrical conductivity material did not meet the minimum shielding criteria of MIL-STD-118-125-1 standard, but all the experimental material applied to the metal spraying coating satisfied the minimum shielding criteria. In conclusion, it is considered that 100 µm of Iron-Aluminum alloy metal spraying coat contains high efficiency in the HEMP shielding.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.116-126
• /
• 2015

In a distributed heterogeneous computing system, the performance of a parallel application greatly depends on its task scheduling algorithm. Therefore, in order to improve the performance, it is essential to consider some factors that can have effect on the performance of the parallel application in a given environment. One of the most important factors that affects the total execution time is a critical path. In this paper, we propose the CLTS algorithm for a task scheduling. The CLTS sets the priorities of all nodes to improve overall performance by applying leveling method to improve parallelism of task execution and by reducing the delay caused by waiting for execution of critical nodes in priority phase. After that, it conditionally uses insertion based policy or duplication based policy in processor allocation phase to reduce total schedule time. To evaluate the performance of the CLTS, we compared the CLTS with the DCPD and the HCPFD in our simulation. The results of the simulations show that the CLTS is better than the HCPFD by 7.29% and the DCPD by 8.93%. with respect to the average SLR, and also better than the HCPFD by 9.21% and the DCPD by 7.66% with respect to the average speedup.