• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.57-70
• /
• 2023

In recent years, the frequency of warnings about particulate matter (PM) has gradually increased in Korea, along with an increase in its intensity. Because of their vast surface area, reactivity to external particles, and characteristics of their leaves, urban trees can act as biofilters, reducing PM pollution. However, the air pollutant PM can cause various types of damage not only to human health but also to vegetation. Studies performed to date on the responses of trees to PM are still insufficient. Here, we analyzed the correlation between PM adsorption and physiological and biochemical responses of four major street tree species, namely, Abies holophylla, Acer buergerianum, Pinus densiflora, and Quercus variabilis, under conditions of approximately 300 ㎍ m^-3 of fly ash emissions using a phytotron. The results showed that the physiological and biochemical responses and PM adsorption differed depending on the tree species. In correlation analysis, it was confirmed that there were positive correlations between physiological factors, and PM adsorption on adaxial leaf surfaces negatively impacted the physiological characteristics. This study provides fundamental information for selecting tree species to reduce PM pollution and develop sustainable urban forests.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.413-422
• /
• 2022

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.51-60
• /
• 2022

Objectives: The purpose is to evaluate dosimetric performance and delivery efficiency of VMAT with Halcyon LINAC for double target spine SBRT Materials and Methods: 12 patients with spine oligometastases were retrospectively studied. Single-isocenter spine SBRT plans was established using Halcyon® with Dual Layer MLC and Truebeam® with High Definition MLC. All patients' plans were created in Eclipse TPS through the identical conditions and optimization. C.I, H.I, G.I (Gradient Index), maximal and volumetric doses to spinal cord and low dose area were evaluated for comparison of both plans. Also, total MU and BOT(Beam On Time) were evaluated. Results: Halcyon plans was no Statistical differences in C.I and H.I. However, the average of G.I was 4.64 for Halcyon, which decreased to 5.5% compared to Truebeam (P<0.001). Halcyon plans demonstrated statistically significant reduced G.I. The average of 50% and 25% isodose volume was 487.56 cc (-3.82%, P<0.001), 1859.45 cc (-4.75%, P<0.001) in Halcyon, respectively. Significantly reduced low dose spill were observed in Halcyon plans. In the evaluation of the spinal cord, the average of Dmean and V10 of Halcyon plans in the sample group with an overlap volume of less than 1 cc was 6.802 Gy (-3.504%, P=0.067), 5.766±1.683 cc (-8.199%, P=0.002), respectively. Halcyon plans demonstrated statistically significant reduced D_mean and V10. For delivery efficiency, MU and BOT(maximum dose rate for each machine), on average, increased in Halcyon plans. However, the average of BOT(800MU/min for each machine) was 648.33 sec for Halcyon (-1.74%, P<0.001). Conclusion: Halcyon plan for double-target spine SBRT demonstrated advantages in the low dose area with a steep dose gradient, while having dosimetrically equivalent target dose distribution and spinal cord protective effect. As a result, Halcyon LINAC produced a dosimetrically improved plan for double-target spine SBRT.

• Korea Trade Review
• /
• v.42 no.2
• /
• pp.145-174
• /
• 2017

Recently, due to the worsening global economic recession, Korea which is a small, export-oriented economy has decreased exports and the domestic economy also continues to stagnate. Therefore, for continued growth of our economy through export growth, we need to analyze the validity of export support system such as export insurance and prepare ways to expand exports. This study is to investigate the effects of Export Insurance on the exports of SMEs as well as LEs. For this purpose, this study conducted Time Series Analysis using data such as export, export insurance acquisition, export price index, exchange rate, and coincident composite index(CCI). First, as a result of the Granger Causality Test, the exports of LEs has found to have a causal relationship with the CCI, and CCI is to have a causal relationship with the short-term export insurance record. Second, the results of VAR analysis show that the export insurance acquisition result and the export price index have a positive effect on the exports of LEs, while the short - term export insurance has a negative effect on the exports of LEs. Third, as a result of variance decomposition, the export of LEs has much more influenced for mid to long term by the short-term export insurance acquisition compared to SMEs. Fourth, short-term export insurance has a positive effect on exports of SMEs. In order to activate short-term export insurance against SMEs, it is necessary to expand support for SMEs by local governments. This study aims to suggest policy implications for establishing effective export insurance policy by analyzing the effects of export insurance on the export of SMEs as well as LEs. It is necessary to carry out a time series analysis on the export results according to the insurance acquisition results by industry to measure the export support effect of export insurance more precisely.

• Korean Journal of Poultry Science
• /
• v.50 no.2
• /
• pp.91-99
• /
• 2023

This study aimed to develop a high-productivity breed of Korean native Samgye chicken. We evaluated the production performance of six Korean native chicken combinations (KNC-SCYC, SCYD, SDYC, SDYD, SYYC, SYYD) and GSP-Hanhyup Korean native chickens, with Baeksemi chickens used as a control group. The performance test was conducted from hatching to 7 weeks of age on 756 chickens, and we measured survival rate, body weight, shank length, feed utility, and carcass yield. The overall survival rate was nearly 100% for all strains. However, body weight showed significant differences between strains at all ages (P<0.01), with Baeksemi weighing 863.8±76.9 g, GSP-Hanhyup weighing 804.7±72.5 g, and KNC-combinations weighing 543.0±61.8 g at 5 weeks of age. The duration needed to reach 850 g was estimated to be 34.5 days for Baeksemi, 37.5 days for GSP-Hanhyup, and 45.8-48.8 days for KNC-combinations. Carcass yield percentage was highest for KNC-SYYD combination at 63.3%, followed by Baeksemi at 60.4%, and GSP-Hanhyup at 56.1%. Shank length at 850 g body weight was 7.6 cm for KNC-SYYD combination, 7.8 cm for Baeksemi, and 8.0 cm for GSP-Hanhyup. The feed conversion ratio at 850 g body weight was 1.81 for Baeksemi, 2.17 for GSP-Hanhyup, and 2.27 for KNC-SCYC combination. Our results suggest that the KNC-SYYD combination and GSP-Hanhyup breed have the potential to be used in Samgye production due to their moderate growth performance, higher carcass yield, and shorter shank length, despite their lower growth productivity and feed efficiency when compared to Baeksemi.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.257-267
• /
• 2023

Purpose. The purpose of the study was to fabricate a prototype robotic simulator for dental education, to test whether it could simulate mandibular movements, and to assess the possibility of the stimulator responding to stimuli during dental practice. Materials and methods. A virtual simulator model was developed based on segmentation of the hard tissues using cone-beam computed tomography (CBCT) data. The simulator frame was 3D printed using polylactic acid (PLA) material, and dentiforms and silicone face skin were also inserted. Servo actuators were used to control the movements of the simulator, and the simulator's response to dental stimuli was created by pressure and water level sensors. A water level test was performed to determine the specific threshold of the water level sensor. The mandibular movements and mandibular range of motion of the simulator were tested through computer simulation and the actual model. Results. The prototype robotic simulator consisted of an operational unit, an upper body with an electric device, a head with a temporomandibular joint (TMJ) and dentiforms. The TMJ of the simulator was capable of driving two degrees of freedom, implementing rotational and translational movements. In the water level test, the specific threshold of the water level sensor was 10.35 ml. The mandibular range of motion of the simulator was 50 mm in both computer simulation and the actual model. Conclusion. Although further advancements are still required to improve its efficiency and stability, the upper-body prototype simulator has the potential to be useful in dental practice education.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.91-107
• /
• 2023

Lean startup is a concept that combines the words "lean," meaning an efficient way of running a business, and "startup," meaning a new business. It is often cited as a strategy for minimizing failure in early-stage businesses, especially in software-based startups. By scrutinizing the case of a startup L, this study suggests that lean startup methodology(LSM) can be useful for hardware and manufacturing companies and identifies ways for early startups to successfully implement LSM. To this end, the study explained the core of LSM including the concepts of hypothesis-driven approach, BML feedback loop, minimum viable product(MVP), and pivot. Five criteria to evaluate the successful implementation of LSM were derived from the core concepts and applied to evaluate the case of startup L . The early startup L pivoted its main business model from defecation alert system for patients with limited mobility to one for infants or toddlers, and finally to a smart bottle for infants. In developing the former two products, analyzed from LSM's perspective, company L neither established a specific customer value proposition for its startup idea and nor verified it through MVP experiment, thus failed to create a BML feedback loop. However, through two rounds of pivots, startup L discovered new target customers and customer needs, and was able to establish a successful business model by repeatedly experimenting with MVPs with minimal effort and time. In other words, Company L's case shows that it is essential to go through the customer-market validation stage at the beginning of the business, and that it should be done through an MVP method that does not waste the startup's time and resources. It also shows that it is necessary to abandon and pivot a product or service that customers do not want, even if it is technically superior and functionally complete. Lastly, the study proves that the lean startup methodology is not limited to the software industry, but can also be applied to technology-based hardware industry. The findings of this study can be used as guidelines and methodologies for early-stage companies to minimize failures and to accelerate the process of establishing a business model, scaling up, and going global.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.29 no.1
• /
• pp.56-76
• /
• 2024

We for the first time made a successful longest continuous sectional observation in the East Sea by an underwater glider during 95 days from September 18 to December 21 2020 in the Korea along the 106 Line (129.1 °E ~ 131.5 °E at 37.9 °N) of the regular shipboard measurements by the National Institute of Fishery Science (NIFS) and obtained twelve hydrographic sections with high spatiotemporal resolution. The glider was deployed at 129.1 °E in September 18 and conducted 88-days flight from September 19 to December 15 2020, yielding twelve hydrographic sections, and then recovered at 129.2 °E in December 21 after the last 6 days virtual mooring operation. During the total traveled distance of 2550 km, the estimated deviation from the predetermined zonal path had an average RMS distance of 262 m. Based on these high-resolution long-term glider measurements, we conducted a comparative study with the bi-monthly NIFS measurements in terms of spatial and temporal resolutions, and found distinguished features. One is that spatial features of sub-mesoscale such as sub-mesoscale frontal structure and intensified thermocline were detected only in the glider measurements, mainly due to glider's high spatial resolution. The other is the detection of intramonthly variations from the weekly time series of temperature and salinity, which were extracted from glider's continuous sections. Lastly, there were deviations and bias in measurements from both platforms. We argued these deviations in terms of the time scale of variation, the spatial scale of fixed-point observation, and the calibration status of CTD devices of both platforms.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.234-240
• /
• 2007

Purpose: In this study we propose a block-iterative method for reconstructing Compton scattered data. This study shows that the well-known expectation maximization (EM) approach along with its accelerated version based on the ordered subsets principle can be applied to the problem of image reconstruction for Compton camera. This study also compares several methods of constructing subsets for optimal performance of our algorithms. Materials and Methods: Three reconstruction algorithms were implemented; simple backprojection (SBP), EM, and ordered subset EM (OSEM). For OSEM, the projection data were grouped into subsets in a predefined order. Three different schemes for choosing nonoverlapping subsets were considered; scatter angle-based subsets, detector position-based subsets, and both scatter angle- and detector position-based subsets. EM and OSEM with 16 subsets were performed with 64 and 4 iterations, respectively. The performance of each algorithm was evaluated in terms of computation time and normalized mean-squared error. Results: Both EM and OSEM clearly outperformed SBP in all aspects of accuracy. The OSEM with 16 subsets and 4 iterations, which is equivalent to the standard EM with 64 iterations, was approximately 14 times faster in computation time than the standard EM. In OSEM, all of the three schemes for choosing subsets yielded similar results in computation time as well as normalized mean-squared error. Conclusion: Our results show that the OSEM algorithm, which have proven useful in emission tomography, can also be applied to the problem of image reconstruction for Compton camera. With properly chosen subset construction methods and moderate numbers of subsets, our OSEM algorithm significantly improves the computational efficiency while keeping the original quality of the standard EM reconstruction. The OSEM algorithm with scatter angle- and detector position-based subsets is most available.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.186-192
• /
• 2010

An infrared heating system, installed in a small venlo-type glasshouse ($280m^2$) in Gyeongsang National University, Jinju, Korea, was used to investigate its heating effect with potted Phalaenopsis, Schefflera arboricola 'Hongkong', Ficus elastica 'Variegata', and Rosa hybrida 'Yellow King' as the test plants. Temperature changes in test plants with the system turned 'On' and 'Off' were measured by using an infrared camera and the consumption of electricity by this infrared heating system was measured and analyzed. In potted Phalaenopsis, when the set air temperature of the greenhouse was $18^{\circ}C$, temperature of leaves and the growing medium were $22.8{\sim}27^{\circ}C$ and $21.3{\sim}24.3^{\circ}C$, respectively. In such tall plants as Schefflera arboricola 'Hongkong' and Ficus elastica 'Variegata', the upper part showed the highest temperature of 24.0 and $26.9^{\circ}C$, respectively. From the results of temperature change measurements, the plant temperatures were near or above the set point temperatures with some fluctuations depending on the position or distance from the infrared heating system. When air temperature between night and dawn dropped sharply, plant temperatures were maintained close to the set temperature ($18^{\circ}C$). There was a significant difference between 'On' and 'Off' states of the infrared heating system in average temperatures of root zone and leaf: 21.8 and $17.8^{\circ}C$ with the system 'On' and 20.4 and $15.5^{\circ}C$ with the system 'Off', respectively, in a cut rose Rosa hybrida 'Yellow King'. The heating load was about $24,850{\sim}35,830kcal{\cdot}h^{-1}$, which comes to about 27,000~40,000 won in Korean currency when calculated in terms of the cost of heating by a hot water heating system heated by petroleum. The cost for heating by the infrared heating system was about 35% of that of a hot water heating system. With the infrared heating system, the air temperature during the night was maintained slightly lower than the set point air temperature, probably due to the lack of air tightness of the glasshouse. Therefore, glasshouses with an infrared heating system requires further investigation including the installation space of the heat-emitting units, temperature sensor positions, and convection.