• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.426-430
• /
• 2009

본 연구에서는 ADCP 측정자료를 효율적으로 활용할 수 있도록 ADCP 이동측정법 자료의 후처리 프로그램을 개발하였다. 먼저, 측정된 ensemble과 방위별 유속으로 표시되던 단면유속분포를 한 눈에 알아볼 수 있도록 좌표를 정리하고 주흐름방향 유속을 출력하는 등, Sontek과 RDI 자료 취득 소프트웨어의 ascii 파일을 사용자가 쉽게 알아보고 가공할 수 있도록 변형하였다. 또한, 기존 ADCP 사용과 관련하여 발표된 screening 및 smoothing 기법을 적용하여 유효한 유속자료를 선별하고 단면의 평균 흐름에 근접한 유속자료를 제공하도록 하였다. 멱함수를 이용한 외삽으로 측정불가역의 유속 및 유량을 추정하였으며, 총 53개 측정자료의 유량을 추정한 결과 ADCP 소프트웨어가 제공하는 유량과 평균 1.33 %의 오차를 보였다. 마지막으로, 정리된 ADCP 자료로부터 하천의 주요 수리학적 특성을 추정하도록 하여 하천단면을 횡단하는 간단한 ADCP 측정만으로도 많은 시간과 노력을 들여 측정하던 하천의 특성을 신속히 파악할 수 있도록 하였다.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.453-460
• /
• 1997

The tissue types of stromata were observed intensively in four species of Hypoxylon under a scanning electron microscope (SEM). These stromata were sectioned with a freezing fracture method for observation. Several tissue types were recognized and stable in each species. This study presents the most intensive observation of tissue types of each layer of stromata. It will be useful for taxonomic criteria for the species level. However, the tissue types can not be major taxonomical criteria for the genus Hypoxylon.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2000

U-turns are allowed widely at the intersections by local police department while the left-turn Phases have been gradually Prohibited. However, any strategies for U-turn movements at signalized intersections are unavailable. Therefore, the Purpose of this study is to Propose the efficient operational method of Urban arterial adopting U-turn strategies. Four alternatives are evaluated they are, 1) U-turn movements are allowed at the adjacent intersection with exclusive U-turn lane while the major or the minor approach is Prohibited, 2) U-turn movements are allowed at the adjacent mid-block Pedestrian crossing with exclusive U-turn lane while the major approach is Prohibited. 3) U-turn movements are allowed at the adjacent mid-block Pedestrian crossing with exclusive U-turn lane while the minor approach is prohibited and 4) Comparative one between alternative 3 and 4. From the results of this study, it concludes that the method of U-turn movements allowed at the adjacent mid-block pedestrian crossing with exclusive U-turn lane is the most effective strategy among those alternatives. The strategies of alternative 1 and 4 are Proposed by the boundary based on the major through and left-turn volumes and the minor left-turn volume.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.305-313
• /
• 2000

The calculation of earthwork plays a major role in plan or design of many civil engineering projects, and thus it has become very important to advanced the accuracy of earthwork calculation. Current methods used for estimating the volume of pit excavation assumes that the ground profile between the grid points is linear(trapezoidal rule), or nonlinear(simpson's formulas). Generally speaking. the nonlinear profile formulas provide better accuracy than the linear profile formulas. However, all the formulas mentioned have a common drawback to ground profile, such as sharp corners or the grid points of any two straight lines. In this paper, mathematical model for a searching examination the drawbacks of the current methods is presented. Also, the presented formular, the spot height method, and chamber formulas, chen and lin method are compared with the volumes of the pits in these examples. As a result of this study, algorithm of a proposal area formula by spline method should provide a better accuracy than the spot height method, chamber formulas, chen and lin method. The mathematical model mentioned make an offer maximum accuracy in estimating the volume of a pit excavation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.319-319
• /
• 2021

유량측정은 측정방법에 따라 측정위치가 변동된다. 도섭법은 관측자가 직접 하천을 횡단하며 측정하는 방법이며 수심이 얕은 경우 가능하다. 보트법의 경우 상대적으로 공간적 제약을 덜 받으며 교량법의 경우 이용 가능한 교량이 있어야 한다. 따라서 교량법은 현장여건에 따라 관측소와 멀리 떨어져 있는 경우가 있으며 이 경우 측정된 유량을 이용하여 수위-유량관계곡선식을 개발한다면 그 정확도가 떨어질 수 있다. 미국지질조사국(USGS)에서는 관측소와 측정위치가 멀리 떨어진 경우 측정된 유량을 보정하도록 규정하고 있다. 우리나라의 경우 유량 보정을 실시하지 않는 것으로 파악되었다. 하지만 이는 수위-유량관계곡선식, 특히 외삽부분에서 큰 오류를 유발할 수도 있어 신중할 필요가 있다. 본 연구에서는 수위관측소와 측정위치가 현저하게 먼 경우 유량 보정방법을 살펴보고 실측유량과 보정유량의 차이를 확인하였다. 대상지점인 낙동강 유역의 안동시(운산리) 지점은 홍수측정위치와 수위관측소 위치가 약 1.7km 이격되어 있으며, 2020년 측정성과(부자)를 이용하여 이를 보정하고 그 차이를 확인하였다. 보정결과 실측유량과 보정유량이 최고 5.0%, 평균 3.7% 차이를 보이는 것으로 확인되었다. 안동시(운산리)지점은 2020년 측정 최고수위가 3.35m이며, 이는 평수위에서 약 2.00m 가량 상승한 것으로 최고 홍수위로 보기는 어렵다. 즉 이보다 더 큰 홍수 사상이 발생하여 수위가 더 상승한다면 실측유량과 보정유량의 차이는 더 커질 것으로 예상된다. 또한 수위관측소와 측정위치가 이격된 경우 측정된 성과가 루프(Loop) 형태를 보일 수 있어 보정이 필요한 것으로 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.7 no.1
• /
• pp.37-44
• /
• 2013

In study suggested clinical availability to shoulder forced traction method in term of quality of image, the patient's convenience and stability, according to whether to use of shoulder forced traction bend using computed tomography(CT) that X-ray calibration and various mathematic calibration algorithm application can be applied by AEC. To achieve this, 79 patients is complaining of cervical pain oriented that shoulder forced traction bend use the before and after acquires lateral projection scout image and transverse image. transverse image of a fixed size in concern field of pixel and figure the average HU value compare that quantitative analysis. Artifact and pixel and resolution to qualitative clinical estimation image analysis. the patient feel inconvenience degree that self-diagnosis survey that estimate. As a result, lateral projection scout image if you used shoulder forced traction bend for the depicted has been an increase in the number of a cervical vertebrae. transverse image concern field shoulder forced traction bend use the before and after for pixel and the average HU-value changes was judged to be almost irrelevant. Artifact and resolution and contrast, in qualitative analysis of the results relating the observer to the unusual result. So, the patients of 82.27% complained discomfort that use of shoulder forced traction bend in self-diagnosis survey. No merit of medical image by using of bend from result was analyzed quality of image to quantitative and qualitative method judged. Nowadays, CT is supplied possible revision of quality of radiation by reduction of slice and automatic exposure controller, etc and application of preconditioning filter process due to various mathematic revision algorithm. So, image noise by beam hardening artifact should not be a problem. shoulder forced traction bend of use no longer judged clinically availability because have not influence of image quality and give discomfort, have extra dangerousness.

• The Journal of Korean Physical Therapy
• /
• v.18 no.6
• /
• pp.1-11
• /
• 2006

Purpose: This study compared the effects of non-cold and cold conditions on the viscoelastic properties of tendon structures in vivo. Methods: Seven male subjects perfomed plantar flesion exercise with maximal isokinetic voluntary contraction, which consisted of muscle contraction for 6 see and relaxation for 60 secs, 10 times for 1 set, Totally 10 sets were repeated. Before and after each task, the elongation of the tendon and aponeurosis of the medial gastrocnemius muscle (MG) was directly measured by ultrasonography. (The relationship between the estimated tendon force and tendon elongation.) Tendon cross-sectional area and ankle joint moment arm were obtained from magnetic resonance imaging (MRI). The tendon force was calculated from the joint moments and the tendon moment arm and stress was obtained by dividing force by cross-sectional areas (CSA). The strain was measured from the displacements normalized to tendon length. Results: After cooling, the tendon force was larger in cold than non-cold. The value of the tendon stiffness of MVC were significantly higher under the cold condition than under the non-cold condition. The maximal strain and stress of $7.4{\pm}0.7%$ and $36.4{\pm}1.8$ MPa in non-cold and $7.8{\pm}8.5%,\;31.8{\pm}1.1$ MPa in cold (P<0.05). Conclusion: This study shows for the first time that the muscle endurance in cooling increases the stiffness and Young's modulus of human tendons. The improvement in muscle endurance with cooling was directly related to muscle and tendon.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.381-381
• /
• 2018

우리나라에서는 지속적인 자연재해로 각기 다른 필요성과 목적에 따라 다양한 형태의 홍수 침수 관련 지도가 작성되어 왔다. 연구 성과로 작성된 계획 빈도 및 상위 2개 빈도의 호우피해예상도를 실측 강우와 연계하여 재난관리단계별 대응단계에 활용하기 위해 실시간 피해위험구역을 표출하고자 한다. 본 연구는 실시간으로 피해위험구역을 표출하기 위해 실측 강우와 연계된 호우피해예상도에 공간 보간 알고리즘을 적용하고자 한다. 호우피해예상도란 돌발호우나 태풍으로 인하여 홍수가 발생하면 인명 및 재산피해를 최소화하기 위해 홍수지역을 미리 예측 가능하도록 제작된 지도이다. 지형자료(DEM), 하천 중심선(Stream Centerline), 하천 횡단면(Cross-Section Line), 제방고(Bank), 수문기상 자료(Hydrological Data), 조도계수(Roughness) 등을 사용하여 하천법 제 21조와 하천법시행령 제 17조를 근거로 작성된다. 본 연구에서는 호우피해예상도에 IDW(Inverse Distance Weighted, 역거리가중법) 보간, TIN(Triangulated Irregular Network system, 불규칙삼각망) 보간, Kriging 보간 방법 적용 알고리즘을 제시하고자 하였다. 호우피해예상도에 보간 알고리즘을 적용하기 위해 보간 방법에 따른 적용사례를 분석하였으며 그 결과, 보간 알고리즘을 적용한 호우피해예상도 보간을 통하여 계획빈도 및 상위 2개 빈도 이외의 빈도(하위빈도-계획빈도, 계획빈도-상위빈도 구간)에 대한 호우피해예상도의 피해위험구역 구현 방안을 제시하였다. 호우피해예상도에 IDW, TIN, Kriging 보간 알고리즘을 적용하여 계획빈도 및 상위빈도 이외의 빈도에 대한 피해위험구역을 표출 할 수 있다. 표출된 계획빈도 및 상위빈도 이외의 빈도를 지점확률강우량-빈도에 대한 Matching table을 통하여 실측 강우와 연계 가능하다. 본 연구 결과는 추후 풍수해피해예측시스템에 활용하여 재난관리단계별 예방 및 대응 단계에 활용 할 수 있을 것으로 판단된다.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.629-640
• /
• 2022

This study analyzed the relationship between local government size and regional economic growth using regional data from 2002 to 2020. By dividing local government expenditure into social development expenditure and economic development expenditure, economic growth and the inverted U-shaped Armey curve were verified, and the optimal size of local government expenditure was examined. In particular, the AMG estimation method considering the cross-sectional dependence and regional heterogeneity existing in the panel data was utilized. As a result of the analysis, it was found that there was an inverted U-shaped relationship between local fiscal expenditure and regional economic growth. When the proportion of total local fiscal expenditure is 7.63% of GRDP and social development expenditure is 3.45%, it is found that the optimal size of expenditure can maximize the regional economic growth rate. Local governments should increase the effectiveness of public expenditure policies by considering these points.