• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2010

Fluorescent photopolymer film was prepared with composition containing acrylate monomer, binder, a visible light sensitive photo initiator, and fluorescent anthracene polymer. A fluorescent grating pattern was inscribed on the photopolymer film using a 2-beam coupling method. A 514 nm laser was coupled to generate a beam-interference pattern. A highly fluorescent diffractive line pattern was formed on the fluorescent photopolymer within 30 sec. of exposure. The fluorescence intensity was highly enhanced in the patterned area, possibly due to the change in the environment of the fluorescent polymers by the photo-polymerization of monomers. Under a photo-mask, a gap electrode pattern was formed of fluorescent gratings with a sub-micron scale, which was matched well to the calculated value ($2.5\;{\mu}m$ and $0.6\;{\mu}m$) based on the refractive index of the photopolymer and beam incident angle ($3.4^{\circ}$, $15^{\circ}$) to the photopolymer surface.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.151-156
• /
• 2020

To analyze the diffraction properties of optical signals and the significant impacts of tapered sidewall profile at periodic trapezoidal 2D diffraction gratings, Toeplitz dielectric tensor is first defined and formulated by 2D spatial Fourier expansions associated with trapezoidal profile. The characteristic modes in each layer is then based on eigenvalue problem, and the complete solution is found rigorously in terms of modal transmission-line theory (MTLT) to address the pertinent boundary-value problems. Based on those one, the numerical analysis is performed on how the tapered side profile of grating structures with trapezoidal refractive index distribution affects the design of a sub-wavelength grating reflector. The numerical results reveal that this tapered sidewall profile plays a critical role in determining the reflection bandwidth, the average reflectance, and the band edge.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2001

The Talbot effect for periodic objects with the spatial period p illuminated by expanded coherent light is analyzed by Fresnel diffraction theory, and the Talbot distance (Zr) at which we can observe 1: 1 imaging without any lenses can be defined. We confmned experimentally the Talbot imaging of line, circular, X -type and '||'&'||'copy;-type 2 dimensional alTay gratings at ZT. At the same time, we observed phase reversed Talbot imaging at Zr/2 and Talbot subimage with p/2 at Zr/4 and 3Zr/4. The visibility of Talbot images as a function of the number of slits of the input grating was measured by the FFf (Fast Fourier Transform) results of these images. As a result stationary maximum visibility of V = 0.25 was obtained from grating numbers with more than 15 slit pairs.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.21-29
• /
• 1989

Using Fresnel diffraction theory a formula is drived for signal intensity variation caused by finite strip obstacles. Signal intensity according to parameter variation of the obstacle is theoretically calculated by a computer and compared with experimental results. For the experiment, an acryl board 3 mm thick was used on which a special material was painted to prevent some reflections and transmissions of the incident wave. 10-element Yagi antennas were used for transmitting and receiving antenna and the frequency was 820 MHz. Finally a tree model was made as a combination of many different finite strip obstacles. Signal attenuation calculated from numerical analysis agree reasonably with experimental data.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.341-348
• /
• 2009

The crystal structure of nano-crystalline, $BaTiO_3$, with the average particle size of 100 nm was investigated using electron diffraction techniques. We characterized the precession electron diffraction system and then carried out the structure determination using precession electron diffraction and conventional selected area electron diffraction. As a result, it was revealed that $BaTiO_3$ nano-crystalline exist as a mixture of tetragonal structure and cubic structure by precession electron diffraction technique. In addition, it could be turned out that $BaTiO_3$ nano-crystalline is a core-shell structure consisted of a tetragonal phased core and a cubic phased surface layer by theoretical calculation. The thickness of the cubic surface layer was approximately 8.5 nm and the lattice parameters of cubic and tetragonal phases were a=3.999${\AA}$ and a=3.999${\AA}$, c=4.022${\AA}$, respectively. Finally, it is expected that precession electron diffraction is more useful technique for structure determination of complicated nano-crystalline materials because of its higher spatial resolution and minimization of dynamical scattering effect.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.287-292
• /
• 2006

Al substituted $CoAl_{0.5}Fe_{1.5}O_{4}$ has been studied with x-ray and neutron diffraction, $M\"{o}ssbauer$ spectroscopy and magnetization measurements. $CoAl_{0.5}Fe_{1.5}O_{4}$ revealed a cubic spinel structure of ferrinmagnetic long range ordering at room temperature, with magnetic moments of $Fe^{3+}(A)(-2.29{\mu}_{B}),\;Fe^{3+}(B)(3.81\;{\mu}_{B}),\;Co^{2+}(B)(2.66{\mu}_{B})$, respectively. The temperature dependence of the magnetic hyperfine field in $^{57}Fe$ nuclei at the tetrahedral (A) and octahedral (B) sites was analyzed based on the $N\'{e}el$ theory of magnetism. In the sample of $CoAl_{0.5}Fe_{1.5}O_{4}$, the interaction A-B interaction and intrasublattice A-A superexchange interaction were antiferromagnetic with strengths of $J_{A-B}=-19.3{\pm}0.2k_{B}\;and\;J_{A-A}=-21.6{\pm}0.2k_{B}$, respectively, while the intrasublattice B-B superexchange interaction was found to be ferromagnetic with a strength of $J_{B-B}=3.8{\pm}0.2k_{B}$.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.260-266
• /
• 1997

Holographic optical elements for polarization separation (HPS) are fabricated in a dichromated gelatin(DCG) thin film of 7${\mu}{\textrm}{m}$ thickness. The polarization properties of HPS is characterized by measuring diffraction efficiency with several physical parameters like exposure time, incident angle and read-out polarization angles. The experimental data are compared with theoretical results based on Kogelnik's coupled wave theory, which shows good agreement. It is also found that the HPS element has a very high extinction ratio of polarization over 500:1 for S and P polarizations, respectively, with He-Ne laser wavelength. We also propose an optical switch optical interconnects by using HPS elements.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.342-347
• /
• 1998

We present a theoretical analysis of Gaussian beam propagation in nonlinear Kerr media by using aberration-free approximation and Huygens-Fresnel diffraction integral and obtain a simple analytic formular for Z-scan characteristics. Z-scan experiments are carried out on amorphous $As_2S_3$ thin film and compared with the theory developed, showing good agreement. The sign and the value of ${\gamma}$ have been measured at 633 nm to be $+8.65{\times}10^{-6}\textrm{cm}^2/W$. We also measured the far-field intensity profiles, which confirm again self-focusing effect.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.49.2-49.2
• /
• 2018

스퍼터링에 의해 증착된 박막 내 기계적 응력 발생 현상을 규명하기 위하여 활발한 이론적, 실험적 접근이 있었으나, 복잡한 플라즈마 증착환경 내에서 다양한 증착 파라미터로 인해 정확한 응력 발생 메커니즘에 대해 아직도 완벽한 규명이 되지 않은 상황이다. 본 연구에서는 몰리브데늄 (Mo)과 텅스텐 (W) 박막을 마그네트론 스퍼터링법을 이용하여 증착 시 발생하는 잔류응력 발생 현상에 대해 논의하겠다. Mo 박막의 경우 증착압력을 2.5 mTorr와 4.1 mTorr로 고정시킨 채 기판 바이어스를 0-250 V 간격으로 변화시킨 결과, 2.5 mTorr에서는 기판바이어스가 증가할수록 압축응력이 증가하는 반면 4.1 mTorr에서는 기판바이어스가 증가할수록 인장응력이 증가하는 것이 확인되었다. 이러한 반대 경향의 잔류응력을 발생시키는 기판 바이어스 효과를 확인하기 위하여 증착 파라미터 변경에 따른 박막 성장 거동 모델을 제시한다. W 박막은 준안정상인 ${\beta}$-상이 증착 초기(2.5 nm)에 형성이 되고, 증착 과정에서 열역학적 안정상인 ${\alpha}$-상으로 상변태 하였다. 상변태에 의한 부피 변화에 따른 잔류응력 발생의 분석을 위하여 X-ray 회절피크의 비대칭성을 분석한 결과 압축응력과 인장응력이 공존하고 있는 것으로 확인되었다. 본 연구결과는 스퍼터링 공정 시 높은 에너지를 가지는 중성화된 Ar과 스퍼터된 원자가 기판과 충돌 시 atomic peening effect에 의해 압축응력이 발생한다는 일반적인 이론과 상충되는 결과로서, Mo 및 W 박막 내 잔류응력 제어를 위한 방안을 제시한다.