• Title/Summary/Keyword: 회절이론

Search Result 168, Processing Time 0.025 seconds

Analysis of the indoor radio signal propagation characteristics by ray-tracing technique (Ray-Tracing을 이용한 구내 전파 전파특성 해석)

  • Ryu, Hwang
    • The Journal of Natural Sciences
    • /
    • v.8 no.2
    • /
    • pp.101-109
    • /
    • 1996
  • In this paper, using the derived formula based on field theory both geometrical optics and diffraction theory, several features of same buildings of Bertoni's construction that influence the propagation of signals between antennas located on the same floor have been investigated theoretically and compared with previously studied results.

  • PDF

Correction of image distortion of CGH with a large diffraction angle (큰 회절각을 가진 CGH의 위치에 대한 오차의 보정)

  • Lee, Jai-Cheol;Oh, Yong-Ho;Go, Chun-Soo
    • Korean Journal of Optics and Photonics
    • /
    • v.16 no.2
    • /
    • pp.128-132
    • /
    • 2005
  • Most CGH programs use a model equation based on the diffraction angle. Therefore, if the diffraction angle is large enough, the image on a flat screen is distorted. To correct the distortion, we created the model equation from diffraction theory and verified it through experiment. We also suggest a design method that compensates for the distortion without changing the CGH program.

Fabrication of High Efficiency Silver Halide Holograms by Reversal Bleaching Process (반전표백 방법에 의한 고효율 은염건판 홀로그램 제작)

  • 백성훈;홍석경;김철중
    • Korean Journal of Optics and Photonics
    • /
    • v.2 no.2
    • /
    • pp.89-95
    • /
    • 1991
  • High diffraction efficiency holographic gratings in silver halide emulsion were fabricated by using reversal bleaching process. The diffraction efficiencies of gratings were improved greatly by applying rapid drying procedure with isopropyl alcohol after bleaching with optimized developers. The dependency of diffraction efficiencies on the different groups of developers, the concentration of bleaching solutions, and the drying methods are investigated experimentally and the results were analyzed theoretically. Same as usual reversal bleaching process, the fabricated gratings showed very low scttering compared to those made by conventional bleach process. The maximum diffraction efficiency was 88%.

  • PDF

The Analysis of Scattering Characteristics of a Prime-focus Offset Parabolic Antenna with a Shaped Edge Structure (정형 모서리 구조를 갖는 옵\ulcornerV 파라볼릭 안테나의 산란 특성 해석)

  • 박대성;김형규;최재훈
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.3
    • /
    • pp.412-418
    • /
    • 1999
  • The scattering characteristics of a prime-focus offset-parabolic antenna are analyzed using UTD. First, ray tracing method is used to locate the shadow boundaries, and then UTD is utilized to evalute the far-zone scattered magnetic field pattern. The field components included in the UTD analysis are the reflected, edge diffracted and creeping waves. The effects of circular caps attached to both edges of a prime-focus offset-parabolic antenna are investigated by comparing the scattered magnetic field patterns with those of a knife edge parabolic reflector.

  • PDF

Resonance Scattering Characteristics of Multi-layered Dielectric Gratings under Conical Incidence (원추형 입사에서 다층 유전체 격자구조의 공진 산란특성)

  • Ho, Kwang-Chun
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.22 no.5
    • /
    • pp.123-128
    • /
    • 2022
  • Applying rigorous modal transmission-line theory (MTLT), the properties of resonant diffraction gratings under conical light incidence is investigated. The mode vectors pertinent to resonant diffraction under conical mounting vary less with incident angle than those associated with diffraction gratings in classical mounting. Furthermore, as the evanescent diffracted waves drive the leaky modes responsible for the resonance effects, the conical mounting imbues diffraction gratings with larger angular tolerance than their classical counterparts. Based on these concepts, the angular-spectral and wavelength-spectral performance of resonant diffraction gratings in conical and classical mounts by numerical calculations with spectra found for conical incidence are quantified. These results will be useful in various applications demanding resonant diffraction gratings that are efficient and physically sparse.

Analysis of Central Spot Fringes by a Hair Slit (머리카락 슬릿에 의해 생기는 중앙의 Spot 무의 분석)

  • Yuk, Geun-Cheol;Kim, Bong-Jin;Lee, Tae-Hun;Jang, Su
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2002.07a
    • /
    • pp.100-101
    • /
    • 2002
  • He-Ne 레이저를 머리카락에 조사시키면 스크린에 단일 슬릿에 의한 회절무늬와 같은 형태의 무늬가 나타난다. 그래서 일반적으로 머리카락 슬릿에 의한 회절무늬를 단일 슬릿에 의한 회절무늬로 기술하는 경향이 있다. 그러나 단일 슬릿에 의한 회절무늬와 머리카락 슬릿에 의한 회절무늬를 비교해 보면 아래 사진에 나타난 것 같이 단일 슬릿에서는 중앙의 제 1 극대점이 밝은 선으로 되어 있지만 머리카락 슬릿에서는 중앙에 밝은 spot이 나타나는 것을 관찰할 수 있다. 따라서 본 연구에서는 이 중앙의 spot무늬가 왜 발생하는지 그 원리를 이론적으로 규명하고 실험하는데 목적이 있다. (중략)

  • PDF

Diffraction by a sub-wavelength-sized aperture in a metal plane (파장보다 작은 금속 구멍을 통한 회절)

  • ;;Arturo Chavez-Pirson
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.164-165
    • /
    • 2000
  • 구멍에 의한 빛의 회절은 광학의 기본적인 문제로서, 최근 근접장 광학(Near-Field Optics)의 발전과 더불어서 파장보다 작은 구멍에서 일어나는 빛의 회절에 대한 관심이 고조되고 있다.$^{(1)(2)(3)}$ 본 연구에서는 그동안 주로 이론적으로 다루어지고 있던 파장보다 작은 금속 구멍을 통한 빛의 회절에 대해 실험결과들을 보고한다. 회절된 빛의 먼장(Far-field)과, 근접장(Near-field)을 모두 측정하기 위해서 고체각 주사기(Solid angle scanner)와 근접장 주사 광학 현미경(Near-field Scanning Optical Microscopy)이 사용되었다. 고체각 주사기(Solid angle scanner)를 사용하여 반구면 위에서의 빛의 이차원 세기 분포가 다양한 편광 상태에 따라서 측정되었고$^{(4)}$ 근접장 탐침(NSOM probe)으로 작은 금속 구멍주변을 주사함으로서 근접장이 측정되었다. 작은 구멍은 최근에 개발된 고출력 근접장 광섬유 탐침(High-power near-field fiber probe)구조를 이용하여 제작되었다.$^{(5)}$

  • PDF

Qualitative Analysis of Bleached Holographic Diffraction Grating (홀로그래피 위상형 회절격자의 정성적 해석)

  • Nam Kim
    • Korean Journal of Optics and Photonics
    • /
    • v.3 no.3
    • /
    • pp.148-154
    • /
    • 1992
  • With nonhardening fixer, dichromated bleacher and alcohol drying, the diffraction efficiency of over 71o/c has been achie'{ed for holographic phase gratings in silver halide emulsion. The swollen emulsion of Agfa 8E75 HD film is identified by scanning electron microscope (SEM) after chemical processing. Dichromated bleacher and rapid dehydration using alcohol drying make a strong modulation so that diffraction efficiency is. increased over 20%. The principal characteristic parameters in coupled wave theory are investigated and new modified parameter values are presented by computer simulation. Controlling the emulsion thickness has an important role as a potential source for high diffraction efficiency.ciency.

  • PDF

A Study of the Crystal Structure of the Fine S-Phase Precipitate in Al-Cu-Mg Alloy by Electron Diffraction Experiments (전자회절실험에 의한 알루미늄 합금 (Al-Cu-Mg)의 미세 S-상 석출입자에 대한 결정구조 연구)

  • Kim, Hwang-Su
    • Applied Microscopy
    • /
    • v.35 no.4
    • /
    • pp.1-9
    • /
    • 2005
  • In this paper it is reported that a comprehensive study of the crystal structure of the fine size S-phase ($Al_2CuMg$) precipitate in Al-Cu-Mg alloy by electron diffraction experiments. The experiments involve taking the selected area diffraction pattern for a S-phase particle, simulations of the pattern based on the kinematical diffraction theory and quantitative data collection from the zone axis diffraction patterns for the comparison with calculated diffraction intensity using both the kinematical and the dynamical diffraction theory. As a result, a good fitting model of the S-phase structure turns out to be the model reported early by X-ray methods (Perlitz & Westgren, 1943), not the new model determined by HRTEM methods (Radmilovic et al., 1999).

Boundary Element Analysis for Diffraction of Water Waves with Vertical Cylinders (연직 해양구조물로 인한 파랑회절의 경계요소 해석)

  • 김성득;이성대;박종배
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.1 no.1
    • /
    • pp.63-70
    • /
    • 1989
  • A numerical analysis of the wave characteristics of wave diffraction and the interference effects for a single cylinder and for two cylinders were carried out by the Boundary Element Method using constant elements. The Present investigation was limited to the diffraction of 2-dimensional linear waves by vertical impervious cylinders. Numerical model has been written to calculate the wave diffraction coefficient both on the boundary of the cylinders and at points away from it. The accuracy of the computational scheme was investigated by comparing the analytical results of the other reseraches. Good agreement was observed.

  • PDF