• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.221-224
• /
• 2008

A secant stiffness linear analysis method was developed for moment redistribution of moment-resisting frames. In the proposed method, rotational spring models are used for plastic hinges of the members whose flexural moments are needed to be redistributed. At the plastic hinges, secant stiffness is used to address the effect of the flexural stiffness reduced by inelastic deformation. Linear analysis is repeated with adjusted secant stiffness until the flexural equilibrium is satisfied in the structure and members. By using the secant stiffness analysis, the effect of the inelastic deformation on the moment redistribution can be considered. Further, the safety of plastic hinges can be evaluated by comparing the inelastic rotation resulting from the secant stiffness analysis with the rotational capacity of the plastic hinges. For verification, the proposed method was applied to a continuous beam tested in previous study. A application example for a multiple story moment-resisting frame was presented.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.205-209
• /
• 1982

Anisotropic rotation of $CDCl_3$ in neat liquid is investigated by the analysis of ${\nu}_1$ band of Raman spectrum and the diffusion constant($D_{\perp}$) for the tumbling motion is obtained. The diffusion constant ($D_{II}$) for the spinning motion is obtained from the above $D_{\perp}$ value and the chlorine-35 nuclear quadrupole relaxation time. The diffusion constants thus obtained seem to agree very well with the ones obtained from $^2H$ and $^35C$l in NQR results within experimental errors. The data suggest fairly anisotropic character of reorientational motions in neat $CDCl_3$.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1066-1074
• /
• 1990

In this paper, we attempt to control induction motors with high power efficiency as well as high dynamic performance by utilizing the recently developed theories : singular perturbation technique and noninteracting feedback control. Our controller consists of three subcontrollers` a saturation current controller, a decoupling controller, and a well-known flux simulator. The decoupling controller decouples rotor speed (or motor torque) and rotor flux linearly. Our controller does not need the rotor resistance that varies widely with the machine temperature. To illuminate the practical significance of our results, we present simulation and experimental results as well as mathematical performance analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.209-214
• /
• 2006

The eccentricity of the rotor causes a rotary machine to unbalance and the balancing to correct or compensate this is very important not only for dust-proof and anti -noise design but also for stabilization and durability of the rotary machine. In this paper, for developing the balancing machine to find and compensate such eccentricity, we will propose new way of measuring eccentricity using hall effect sensor that is different from the way in a conventional balancing machine. And we will show that it is possible to make balancing machine more compactly and cheaply by experiment results using hall effect sensor to measure eccentricity. Moreover we try to control and monitor the balancing machine by personal computer through serial communication.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.33-37
• /
• 2008

The interaction between artificial fish and aquatic surroundings and the fish's realistic locomotion are very important elements to construct virtual aquariums. In general, the artificial fish in virtual aquariums used to be created by 3D modeling tools, and was repeatedly showing the simple and constant form of swimming. This paper will analyze the sorts of biological forms of fish-swimming and the propelling and turning characteristics. Then, we propose a method of the basic swimming and turning of artificial fish to generate various and natural-looking locomotion. It is possible to make a explorable virtual aquarium more immersive by using interactive interfaces together.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.117-121
• /
• 2008

The effect of tip clearance on the performance of a supersonic impulse turbine was investigated experimentally. Test was performed using high pressure air in wide ranges of pressure ratio and rotational speeds. Test revealed that efficiency gradient of the subject turbine at a reference test point was a very low value of 0.05. Turbine efficiency was varied non-linearly with respect to tip clearance. It has been found that efficiency gradient is proportional to the cube of rotational speed at a fixed turbine pressure ratio. It also has been found that efficiency gradient shows its minimum at a reference test pressure ratio irrespective of rotational speeds.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.379-382
• /
• 2024

본 논문에서는 위치기반 동역학(Position based dynamics, PBD)을 기반으로 하는 프레임워크를 활용하여 풍선 내 공기로 의한 표면의 회전과 변형을 효율적으로 표현할 수 있는 새로운 방법을 제안한다. 기존의 경우 볼륨 형태인 다면체 메쉬(Tetrahedral mesh)를 활용하여 표면 내부를 모델링 하거나 입자 기반의 유체 시뮬레이션을 통하여 공기역학을 계산해야 되지만, 각각의 동역학뿐만 아니라 상호작용까지 고려해야 되기 때문에 계산양이 커서 다양한 분야에서 활용하기 어렵다. 본 논문에서는 이 문제를 효율적으로 풀어내기 위해 공기의 움직임을 파악하기 위한 유체 시뮬레이션을 계산하지 않고도, 풍선 내 바람에 의한 표면 수축 및 확장을 PBD기반으로 풀어내고, 공기가 빠질 때 나타나는 표면의 회전을 효율적으로 계산할 수 있다. 본 논문에서 제안하는 방법은 정점(Vertex)의 개수가 많은 모델에서도 실시간 처리되는 결과를 보여 줄 수 있기 때문에 게임뿐만 아니라 실시간을 요구하는 물리기반 가상환경 구축에 활용될 수 있다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.181-187
• /
• 2024

There are two kinds of well-known CNN methods, the group equivariant CNN and the CNN using steerable filters, which have excellent classification performances for randomly rotated objects in image space. This paper describes their mathematical structures and introduces implementation methods. We implement them, including the existing CNN, which have the same number of filters, then compare and analyze their performances by simulating them with the randomly rotated MNIST. According to the experimental results, the steerable CNN, which shows a classification improvement over the others, has a relatively small number of parameters to learn, so performance degradation is relatively small even when the size of the training dataset is reduced.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analyses. For this, the displacement field is expressed by introducing displacement parameters defined at the centroid and shear center axes, respectively. Next the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are rigorously derived by degenerating the energies of the elastic continuum to those of curved beam. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by centroid formulation, previous research and ABAQUS's shell elements.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.209-212
• /
• 2001

오늘날, 디지털 워터마크에 대하여 기하학적 변환에 대한 강인성이 요구되고 있다. 본 논문에서는 회전, 이동 및 크기변화에 강인한 워터마킹 방법을 제안한다. 영상의 푸리에 변환 계수를 이용하여 이동에 대한 강인한 속성을 가지도록 하며, 입력 마스크의 상호 관계가 회전, 크기 변화에 강인하도록 워터마크 마스크를 생성한 후 영상에 삽입한다. 삽입된 워터마크의 검출은 영상의 주파수 영역의 radial projection 에 대한 워터마크 신호의 상관도를 이용하여 검출한다. 실험을 통하여 제안된 방법이 여러 가지 기하학적 변환에 강인함을 보여준다.