• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.5-6
• /
• 2018

무선 통신 자원의 효율적인 사용을 위해 제안된 회전 모드 시스템을 구성하는 핵심 장치인 회전 모드 생성기를 2단계 유전 알고리즘을 이용해 자동으로 설계했다. 1단계 최적화로 회전 모드 생성기의 필요 부품 개수와 개별 부품 배치를 먼저 결정하고, 2단계 최적화로 각 부품의 세부 사항을 최적화하였다. 2단계 유전 알고리즘에 의하면 필요 부품 개수는 5개이며, 동일한 결과를 도출하는 세부 부품 배치도는 4종류였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.169-172
• /
• 2001

본 논문에서는 회전된 문서에서의 회전각 검출과 문서에 포함된 그림, 글자, 표, 직선과 같은 구성요소를 자동으로 분석하고 분류하는 방법을 제안한다. 본 연구는 입력영상을 획득하는 과정에서 발생되는 회전각에 의해 발생되는 오류를 최소화하기 위한 회전각 검출단계, 각 구성요소 검출에 불필요한 배경제거 단계, 각 구성요소의 특성을 통한 구성요소 분류단계로 이루어진다. 제안한 문서 인식 시스템의 성능 평가를 위해서 다양 한 문서에 제안한 방법을 적용하고, 성공적인 결과를 보인다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.53-58
• /
• 2022

Since a general household fan has only one left/right turning stage, the rotation angle cannot be adjusted leading to cases whether the wind reaches to an unnecessary area or vice versa. In this paper, we propose a method to efficiently control the turning section to selectively send wind to a necessary space while reducing energy waste. The minimum rotation angle was obtained by experimentally measured the stationary wind direction angle of the fan, and the optimal number of turning stages was selected by appropriately dividing the space where the wind reaches. Through this, it was confirmed that if the fan has a minimum rotation angle of 45°, a turning section of 3 stages and its rotation angle is increased by twice the stationary wind direction angle at each stage, the wind is distributed efficiently. Therefore, it is considered that the selective turning stage control proposed in this paper can minimize energy waste without significant change of the fan structure.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.107-110
• /
• 2013

본 논문에서는 좁은 수로에서의 3단계의 기울기와 2단계의 유량에서 수차의 흘수와 효율에 관한 실험을 수행하였다. 컴퓨터에 의하여 제어되는 자동화된 축소 실험 환경을 구성하고, 3단계의 기울기와 2단계의 유량 각각에 대하여 10단계의 흘수별 회전효율 데이터를 취득하고, 취득한 데이터를 이용하여 회전 효율을 분석하고, 전에 실험한 다른 논문의 결과와 비교하여 잘못된 결과들을 찾아내고, 유사하게 현상들의 동일함을 확인하며, 수작업 실험에서 밝혀내지 못한 현상들을 추가하여, 컴퓨터의 이용효과를 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.1-9
• /
• 1984

A mult-stage rotating biological contactor process was evaluated by using the mixtures of nightsoil and sewage as influent substrate. An emphasis was concentrated on the BOD removal efficiency at each stage of the process with respect to hydraulic detention times, rotating speeds of the disc and influent organic substrate concentrations. The results indicated that the process was found to be economically feasible when operated at hyduraulic detention time of 2 hours and disc rotating speed of 3 RPH. As to treatment efficiency, BOD removal efficiency of 40 to 50 percent could be obtained at the first stage regardless of influent organic substrate concentrations. The overall BOD removal efficiency of the process was found to be 88 to 90 percent at even high organic loading of $2.0kgBOD/m^3{\cdot}day$.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.53-57
• /
• 2010

Purpose: The goal of this study was to evaluate differences in strength deficits between (i) patients with stage 1 or 2 impingement syndrome and (ii) patients with rotator cuff tears. Materials and Methods: We enrolled 43 patients with stage 1 or 2 impingement syndrome (group 1) and 21 patients with rotator cuff tears (group 2). The isokinetic strength of both groups was evaluated at $60^{\circ}/sec$ for external rotation, internal rotation, adduction and abduction. We measured the peak torque, total work, average power of bilateral sides, peak torque relationship to body weight, and the ratio between unilateral agonist and antagonist. Results: The isokinetic strength deficits assessed in ratio of peak torque to body weight for group 1 and group 2 respectively were; $28.48{\pm}23.76%$ and $29.12{\pm}32.81%$ for abduction (p=0.929), $7.20{\pm}13.98%$ and $18.94{\pm}19.52%$; for adduction (p=0.021), $16.88{\pm}13.76%$ and $25.80{\pm}24.07%$; for external rotation (p=0.221), and $14.1{\pm}25.67%$ and $29.02{\pm}35.06%$ for internal rotation (p=0.059). For average power and total work, group 2 showed a significantly greater deficit for adduction and internal rotation than group 1. Conclusion: Those with rotator cuff tears have more isokinetic muscle strength deficits than those with stage 1 or 2 impingement syndrome. Progression from stage 1 and 2 impingement syndrome to stage 3 may result in greatest changes in strength deficits for internal rotation and adduction.

• The KIPS Transactions:PartB
• /
• v.9B no.4
• /
• pp.509-516
• /
• 2002

This paper proposes an efficient algorithm which recognizes the mixed document image consisting of the images, texts, tables, and straight lines. This system is composed of three steps. The first step is the detection of rotation angle for complementing skewed images, the second is detection of erasing an unnecessary background region and last is the classification of each component included in document images. This algorithm performs preprocessing of detecting rotation angles and correcting documents based on the detected rotation angles in order to minimize the error rate by skewness of the documentation. We detected the rotation angie using only horizontal and vertical components in document images and minimized calculation time by erasing unnecessary background region in the detecting process of component of document. In the next step, we classify various components such as image, text, table and line area included in document images. we applied this method to various document images in order to evaluate the performance of document recognition system and show the successful experimental results.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.1
• /
• pp.79-86
• /
• 2012

The conservative treatment for impingement and rotator cuff tear includes rest, nonsteroidal anti-inflammatory drugs (NSAIDs), local steroid injection and physiotherapy depending on the purpose to relieve the pain and inflammation, in addition, stretching exercise to recover flexibility and strengthening exercise to recover the function could be used. When these conservative treatments are divided into multiple steps, the first one contains pain relief, modification of daily activity and stretching exercise. Second step includes strengthening exercise of the anterior/posterior cuff and peri-scapular muscles and eventually. The third step includes training program to return to job, housework and hobby activities and maintain. Thus, the key of these step wise approach for the treatment of impingement and rotator cuff tear is exercise program. Understanding of various exercise program and apply to the patients properly is most important for the conservative treatment of impingement and cuff tear.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.26-26
• /
• 2000

본 연구에서는 풍력발전기용 복합재 회전날개의 설계단계에서 공력 설계 후 결정되어진 공력 형상을 기초로 하여 구조적 형상설계를 수행 할 때에 여러 가지 경우의 형상을 해석하여 이중 설계요구조건에 적합한 경우를 채택하는 시행착오 방법으로 인한 비효율적인 요소를 배재 하기 위해 고전 적층판 이론을 기초로 한 해석 프로그램을 사용하여 예비설계를 수행하는 수정된 설계절차를 제안하였으며 예비설계단계에서 신속하고 신뢰성 있는 해석결과를 얻을 수 있었다.(중략)

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.109-126
• /
• 2014

The level of service (LOS) of the Highway Capacity Manual (KHCM) has been used as a basic criterion at decision making processes for signalized intersections in Korea. The KHCM provides five steps for the signalized intersection analysis. Among them, lane grouping, which is the third step, significantly influence the final LOS. The current method presented in the KHCM, however, classifies a shared lane as a de facto turning lane group, even though the turning traffic of the shared lane is few. Thus, this research was initiated to provide an alternative. To this end, three alternatives were suggested, including the method based on the lane grouping presented in the U.S. Highway Capacity Manual, the method using turning ratio of shared turning lane, and the method using a threshold traffic volume in lane grouping. The feasibilities of the three methods were evaluated using a calibrated CORSIM model. Conclusively, the method using a threshold traffic volume in lane grouping outperformed.