• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.26-35
• /
• 2006

Design parameters of manned and unmanned rotorcrafts have been investigated to construct a design database and to derive trend curves. Design parameters of 78 manned rotorcrafts and 33 unmanned rotorcrafts have been collected and analyzed using linear regression method. Six kinds of trend curves equations are derived. Most of trend curves derived are relatively meaningful according to the calculated correlation and determination coefficients. The comparisons between manned and unmanned rotorcraft characteristics are performed. It has been drawn according to the comparisons that unmanned rotorcraft has smaller main rotor diameter and maximum take-off weight, bigger tail rotor size and similar level of empty weight fraction than manned rotorcraft.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.6-13
• /
• 2007

PAV(Personal Air Vehicle) can be an alternative of the saturated ground transportation in future and can be available in any time and anywhere. This paper describes some overview on high speed rotorcraft concepts for the PAV applications. First the requirement of PAV is surveyed. Then the existing concepts of high speed rotorcrafts are reviewed. Several on-going projects are summarized. Finally! technical issues of high speed rotorcraft to apply to PAV platform are explored.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.2
• /
• pp.26-32
• /
• 2013

The rotorcraft makes lift and control forces by the rotor thrust. At the development phase of the rotorcraft, the operational limitations have to be established. And it shall be demonstrated to operate the rotorcraft safely within the limitations. This paper introduces establishment and evaluation results of operational rotor speed limitations for the medium class utility rotorcraft. And it shows the follow-up activities after design changes of rotor speed indicators and aural warning systems for implementing the rotor speed limitations.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2023

This paper describes the system integration laboratory's requirement analysis, implementation, and verification for multiple-scenario unmanned aerial vehicle operation and control technology using a manned rotorcraft for Manned-Unmanned Teaming. System integration laboratory consists of manned rotorcraft flight simulation, unmanned aerial vehicle flight and mission equipment simulation, ground control system simulation for unmanned aerial vehicle control and change in the control authority between the ground control system and manned rotorcraft, and operation and control system for mission plan's writing and transmission. Each implemented simulation verified the requirements through software and hardware integration test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.713-721
• /
• 2014

In Europe and USA, new programs called GRC(Green Rotorcraft) and SRW (Subsonic Rotary Wing program) respectively, have been currently underway for developing the next generation rotorcraft. The final goal is to develope fuel-efficient/environmental-friendly tilt-rotor civilian rotorcraft, which can partly replace short-range regional aircrafts. Also for safe operation, the new rotorcraft technology is cooperated with the new air transport management(ATM) system, called SESAR(Single European Sky ATM Research) and NextGen(Next Generation Air Transport System) in Europe and USA. In addition to achieve the final goal, the tilt-rotor aircraft, they are trying to improve the performance of conventional helicopters by adopting more efficient propulsion system, active rotor system, and reducing internal and external noise. Especially in GRC program of Europe, the environmental factors such as noise, fuel efficiency, reduction of emission gas(CO2, NOx), are focused for the new technologies.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Technical history of VTOL aircraft is examined from the early helicopter appearance to recent experimental rotorcraft in order to distinguish the core issues of those aircraft. Performance and technological challenges of some VTOL aircraft such as tilt rotor, convertiplane, gyroplane, and coaxial helicopter are discussed. As a new generation high performance rotorcraft, Sikorsky X2 is intensively investigated. Considering the developmental history of X2, the autorotational ability at high speed is recognized as a core technology. Analytic method of autorotation and some results are shown and presents research subjects related to the future Korean high performance rotorcraft.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.75-83
• /
• 2016

This paper presents a survey of patents and an analysis of a conceptual study for the development of rotor drive systems in combined unmanned rotorcraft in. The patents were classified into 10 cases with respect to the rotor drive system development, and these are reviewed and analyzed in detail. The results describe development concepts for rotor drive systems for vehicles obtained through the patent analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.679-686
• /
• 2018

In previous paper[1], the authors had compared the current status of European and US rotorcraft development status. In this paper, more detailed procedures have been studied how the European rotorcraft technologies are developed preparing for 21 st century to be more competitive to US. For the systematic procedure to develop next generation aviation technologies including rotorcraft, the pan-European organization, ACARE, was established, and proposed major research agenda for next generation aviation technologies and businesses. Based on the proposed research agenda, all the R&D programs supported by EU are reorganized to be more efficient and competitive. The procedures for the rotorcraft technologies are, first, cabin noise/vibration reduction program (FRIENDCOPTER), second, core technologies to increase of rotor efficiencies and reduce rotor noise (GRC), and then finally to develop fast/long-range next generation rotorcraft (Fast Rotorcraft). As mentioned in previously, all the R&D procedure has to satisfy basic research agenda especially the environmental impact. With theses procedure, the European rotorcraft business had successful achievements not only in current and future market share, but also preparing for next generation rotorcraft platform such as compound and tilt-rotor rotorcraft satisfying market needs.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.2
• /
• pp.21-25
• /
• 2013

The system and components for aircraft are required the design data on which the safety requirements are properly reflected for their certification. This paper presents the procedure and results of a safety assessments analysis for the rotorcraft fuel pumps in oder to confirm and verify them. The fuel pumps design assessment must be performed, including a detailed failure analysis to identify all failures that will prevent continued safe flight or safe landing. In order to assess the fuel pumps design safety, not only system safety hazard analysis and but FTA(Fault Tree Analysis) for proofing the safety objective of the fuel pumps are performed. The results of the safety assessment for fuel pumps validate that no single failure or malfunction could result in catastrophic failure or critical accidents of the rotorcraft.

• Computational Structural Engineering
• /
• v.21 no.3
• /
• pp.75-80
• /
• 2008