• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.111-116
• /
• 2000

There are many recent monitor manufacturing firms not equipped with automatic checking system in their final process. And the check is based on the human perception, so the automatic checking system is needed for the consistency and the accuracy of the checking process to elevate the productivity and the quality. As the performance of computer systems and the vision systems has been increased, the cost for the system is reduced and their applicable algorithms have been developed. In this study we develop monitor checking system which is low-cost, fast, and easy to adopt by the small-scaled manufacturing films. The system is based on the computer vision techniques, and is equipped with the GUI interface and checking functions such as centering, yoke rotation, pincushion, sizing, brightness, and grayscale tracking. Monitor checking system developed in this study can be used in the final checking process thereby we expect the synergy effects both on the efficiency of production and on the reduction of the cost for the facility investments.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.196-206
• /
• 2009

The profitability of a hospital refers to business administration results achieved through its medical care and other management activities during applicable fiscal year. This study focused on operating margin as a measurement index of hospital profitability, which is a genuine medical return obtained by subtracting medical expenses from medical profits achieved during business administration of hospital. Based on the index, this study could deduce certain factors on hospital profitability in terms of various indices affecting profitability. And based on those factors, this study sought to provide more useful reference materials which allow us to devise possible ways to improve hospital profitability. As a result, it was found that public hospitals attained lower profitability than private ones. To analyze profitability depending on each index, this study divided hospitals broadly into deficit group and surplus group. As a result, it was found that there were significant differences in hospital profitability between two groups depending upon relevant indices such as labor cost ratio, maintenance expense ratio, number of operations per medical specialist and medical instrument turnover. According to analysis on potential effects of relevant indices upon profitability, it was found that each index had its explanatory power ranging from 25% to 74.5% depending on given model.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.94-101
• /
• 2019

The dynamic characteristics of the composite reflector panels are numerically and experimentally investigated. A dynamics model of the panel is analytically developed based on a deployment mechanism of the antenna. The deployment is passively activated using elastic energy of a spring with two rotational degrees of freedom. Using the flexible multi-body dynamic analysis ADAMS, dynamic behavior of the panels such as velocities, deformations, as well as reaction forces during the deployment, are investigated in the gravity and zero-gravity cases. The reflector panel is manufactured using carbon fiber reinforced plastics (CFRPs) and its deployment characteristics are experimentally observed using a zero-gravity deployment test. The impact response and vibration problems that occur during deployment of the antenna panel have been identified and reliably deployed using dampers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.9
• /
• pp.72-80
• /
• 2019

In this task, the tool dynamometer design and manufacture, and the Ansys S/W structural analysis program for tool attachment that satisfies the cutting force measurement requirements of the tool dynamometer system are used to determine the cutting force generated by metal cutting using 3-axis static structural analysis and the LabVIEW system. The cutting power in a cutting process using a milling tool for processing metals provides useful information for understanding the processing, optimization, tool status monitoring, and tool design. Thus, various methods of measuring cutting power have been proposed. The device consists of a strain-gauge-based sensor fitted to a new design force sensing element, which is then placed in a force reduction. The force-sensing element is designed as a symmetrical cross beam with four arms of a rectangular parallel line. Furthermore, data duplication is eliminated by the appropriate setting the strain gauge attachment position and the construction of a suitable Wheatstone full-bridge circuit. This device is intended for use with rotating spindles such as milling tools. Verification and machining tests were performed to determine the static and dynamic characteristics of the tool dynamometer. The verification tests were performed by analyzing the difference between strain data measured by weight and that derived by theoretical calculations. Processing test was performed by attaching a tool dynamometer to the MCT to analyze data generated by the measuring equipment during machining. To maintain high productivity and precision, the system monitors and suppresses process disturbances such as chatter vibration, imbalances, overload, collision, forced vibration due to tool failure, and excessive tool wear; additionally, a tool dynamometer with a high signal-to-noise ratio is provided.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.42-49
• /
• 2012

Critical speed of high thrust liquid rocket engine turbopump is obtained through a rotordynamic analysis and a unloaded turbopump test is peformed for validation of the numerical model. The first critical speed predicted by the numerical analysis is correlated well with the test result for the bearing unloaded rotor condition only considering mass unbalance load. Using the previous rotordynamic model, critical speed variation is estimated as a function of varied bearing stiffness due to pump and turbine radial loads with relative angle difference. From the numerical analysis, it is found that the relative angle difference of pump and turbine radial loads greatly affects the critical speed. However, additional axial load reduces the effect derived from the relative angle difference of radial loads.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1992.10a
• /
• pp.2-2
• /
• 1992

최근 여러 분야에서 컴퓨터의 용도가 확산되고 더 높은 computing power에 대한 요구가 증가함에 따라, 컴퓨터의 성능을 향상시키기 위하여 프로세서의 고속화와 함께 시스템 구조의 개선을 위한 많은 연구가 진행되고 있다. 한 시스템내에 여러 개의 CPU들이 존재하는 다중프로세서 시스템(multiprocessor system) 구조를 가진 슈퍼미니급 중형 컴퓨터들은 상호연결망으로서 버스(bus) 방식을 많이 채택하고 있다. 버스 구조는 하드웨어가 간단하여 구현이 용이하지만, 여러 개의 시스템 지원들(프로세서들, 기억장치 모듈들 및 입출력 모듈들)이 버스를 공유하기 때문에 경합으로 인한 지연 시간이 발생하게 된다. 이러한 지연 시간으로 인한 성능 저하를 개선하는 방법으로는 버스 수의 증가와 최적 통제 프로토콜의 설계가 있다. 본 연구에서는 여러 개의 버스를 가진 다중프로세서 시스템에서 4가지 대표적인 버스 중재 프로토콜들에 대해 성능을 분석, 비교하여 최적 프로토콜을 제시하고자 한다. 이러한 대규모 하드웨어에 의하여 구현되는 시스템에서 주요 설계 요소들에 따른 시스템 성능 분석과 비교는 설계 단계에서 필수적인 과정이다. 그러나 하드웨어를 만들어서 분석하는 방법은 시간과 비용이 많이 소요되기 때문에 소프트웨어 시뮬레이션 방법이 널리 사용되고 있다. 본 연구팀에서는 시뮬레이션 전용언어인 SLAM II를 이용하여 다중프로세서 시스템의 시뮬레이터를 개발하고, 버스중재 프로토콜(bus arbitration protocol)을 용이하게 변경할 수 있도록 하여 각각의 성능을 비교하였다. 이 연구에서 비교된 프로토콜들은 고정-우선순위 방식(fixed-priority scheme), FIFO(first-in first-out) 방식, 라운드-로빈 방식(round-robin scheme), 및 회전-우선순위 방식(rotating-priority scheme) 등이다. 실험은 시스템의 주요 요소들인 프로세서와 기억장치 모듈 및 버스의 수들을 변경시킴으로써 다양한 시스템 환경에 대한 분석을 시도하였다. 작업 부하가 되는 기하장치 액세스 요구간 시간가격(inter-memory access request time interval)은 필요에 따라서 고정값 또는 확률 분포함수를 사용하였다. 특히, 실행될 프로그램의 특성에 따라 각 프로토콜의 성능이 다르게 나타날 수 있음을 검증하였으며, 기억장치의 지역성(memory locality)에 대한 프로토콜들의 성능도 비교하였다.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.427-435
• /
• 2016

This study considers the design of a 130kW-class IPMSM for propulsion of a Tram-Train. This Tram-Train has a wide range of speed variation. For this reason, this study suggested IPMSM, which has wide speed variation as a motor for propulsion of the Tram-Train, a basic model suitable for the required traction force was designed. IPMSM has different electromagnetic and structural characteristics depending on the shapes of its rotor. Therefore, the suggested model was additionally designed, and by dividing a permanent magnet was changed so as th have a shape with an added bridge. Finally, by analyzing the load characteristics with finite element analysis of the basic and suggested models and by comparing electromagnetic and structural characteristics, a model has been derived that satisfies IPMSM for the propulsion of the Tram-Train.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.211-217
• /
• 2019

Oil extraction from oil sands, a non-traditional crude oil resource, is attracting attention as the oil price fluctuates due to recent economical and political issues. Many oil sands sites are mainly located in the polar regions. For plant construction to extract crude oil from oil sands in harsh environment of the polar regions, fast and simple installation of plant foundation is necessary. However, typically-used conventional foundations such as drilled shafts and driven piles are not suitable to construct under cold temperature and organic surface layers. In this study, helical piles enabling rapid and simple constructions using small rotary equipment without driving or excavation was considered. The helical pile consists of steel shaft and several helices attached to the steel shaft; therefore, the behavior of the helical pile depends on the number and shape of the helices. The effect of the helices' configuration (number and diameter of helices) on helical pile behavior was analyzed based on the numerical analysis results.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.55-60
• /
• 2020

As research and development of eco-friendly vehicles are expanding worldwide, additional devices of vehicles are reduced or deleted to increase the mileage, or research is being conducted to reduce weight. Among them, the multi-stage transmission that was applied to the internal combustion engine vehicle was deleted and replaced with a reducer, and the initial driving power is secured by increasing the torque through the control of the motor output value. However, since frequent motor speed change can result in a load increase, this study attempts to develop a compact and lightweight manual two-stage reducer with a general reducer structure. Therefore, a two-speed transmission with two gear ratio was designed by inserting a large gear and a small gear in a structure with a parallel shaft to connect the gears with a V-belt in the form of a parallel shaft reducer, and setting the gear ratio of the low and high gears respectively. In addition, power performance according to the rotational speed and load of the transmission was checked through a test, and the heat generation characteristics generated during driving were checked to verify the validity of the transmission.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.727-734
• /
• 2021

The purpose of this study was to analyze correlation between kinematic variables and ground slope perception ability during golf putting. 16 collegiate golfers were participated. To collect and analyze the kinematic data of putter head, SAMPutt lab was used(70 Hz). It was performed Pearson's correlation analysis using SPSS. The level of significance was at .05. As a results, right was correlated with backswing in flat. Toe-up was correlated with follow-through and left was correlated with aim, backswing, impact, follow-through, and loft in slice 1°. Toe-down was correlated with aim, backswing, impact in slice 2°. Toe-up was correlated with follow-through in hook 2°. In conclusion, it is important to improve the putting stroke through repetitive ground slope perception training.