• The Journal of the Petrological Society of Korea
• /
• v.7 no.3
• /
• pp.147-160
• /
• 1998

The Samrangjin Caldera, a trapdoor-type, formed by the voluminous eruption of the silicic ash-flows of the Samrangjin Tuff which is above 630m thick at the northern inside of the caldera and thinnerly 80m at the southern inside. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was ejected to form the Samrangjin Tuff. The explosive eruptions began with phreatoplinian eruption, progressed through small plinian eruption and transmitted with ash-flow eruption. During the ash-flow eruption, contemporaneous collapse of the roof of the chamber resulted in the formation of the Samrangjin caldera, a subcircular depression subsiding above 550m deep. During postcaldera volcanism after the collapse, flow-banded rhyolite was emplaced as cental plug along the central vent and ring dikes along the caldera margins. Subsequently rhyodacite porphyry and dacite porphyry were emplaced along the inner side of the ring dike. After their emplacement, residual magma was emplaced as a hornblende biotite granite stock into the southwestern caldera margin. In the northeastern part, the eastern dikes were cut final intrusions of granodioritic to granitic composition along the fault zone of $^{\circ}$W trend.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.96-110
• /
• 1997

The Wondong Caldera, formed by the voluminous eruption of the rhyolitic ashflows of the Wondong Tuff which is about 1,550 m thick at the intracaldera and 550 m at the outflow, is a resurgent caldera which shows a dome structure on the central exposure of the caldera. The Wondong caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which rhyolitic magma was ejected, as small fallouts and voluminous ash-flows, to form the Wondong Tuff. The explosive eruptions began with ash-falls, progressed through pumice-falls and transmitted ash-flows. During the ash-flow phase the initial central vent eruption transmitted into late ring-fissure eruption which accompanied with caldera collapse. Contemporaneous collapse of the roop of the chamber resulted in the formation of the Wondong Caldera, a subcircular depression subsiding about 1,930 deep. Following the collapse, quartz porphyry was intruded as ring dykes along the ring fracture near the southwestern caldera rim. Subsequently the central part of the caldera floor began to be uplifted into a circular resurgent dome by the rising of residual magma. Concurrent with the resurgent doming, the volcaniclastic sediments of Hwajeri Formation were accumulated in the caldera moat and then rhyodacite lava erupted from the initial central resurgent dome and another ash-flow tuff from the northern ring fracture. After the sedimentation, the find-grained granodiorite was intruded as an arc along the eastern ring fracture of the caldera. Finally in the central part, the resurgent magma was emplaced as a hornblende biotite granite stock that formed the central dome.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.2
• /
• pp.74-89
• /
• 2002

Rock units, relating with the Guamsan caldera, are composed of Guamsan Tuff and rhyolitic intrusions. The Guamsan Tuff consists almost entirely of ash-flow tuffs with some volcanic breccias and fallout tuffs. The volcanic breccia comprises block and ash-flow breccias of near-vent facies and caldera-collapse breccia near the ring fracture. The lower ash-flow tuffs are of an expanded pyroclastic flow phase from the pyroclastic flow-forming eruption with an ash-cloud fall phase of the fallout tuffs on the flow units, but the upper ones are of a non-expanded ash-flow phase from the boiling-over eruption. The rhyolitic intrusions are divided into intracaldera intrusions and ring dikes that are subdivided into inner, intermediate and outer dikes. We compile the volcanic processes along a single cycle of cadela development from the eruptive phases in the Guamsan area. The explosive eruptions began with block and ash-flow phases from collapse of glowing lava dome caused by Pelean eruption, progressed through expanded pyroclastic flow phases and ash-cloud fallout phases during high column collapse of pyroclastic flow-forming eruption from a single central vent. This was followed by non-expanded ash-flow phases due to boiling-over eruption from multiple ring fissure vents. The caldera collapse induced the translation into ring-fissure vents from a single central vent in the earlier eruption. After the boiling-over eruption, there followed an effusive phase in which rhyolitic magma was injected and erupted to be progressively emplaced as small plugs/dikes and ring dikes with many lava domes on the surface. Finally rhyodacitic magma was on emplaced as a series of dikes along the junction of both outer and intermediate dikes on the southwestern side of the caldela.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.467-476
• /
• 2017

Volcanic rocks related to the Guamsan cadera, which find in the southeastern Cheongsong, are divided into Volcanic breccia, Guamsan Tuff and Post-collapse intrusions. We determined their eruption, intrusion and caldera-forming timings based on SHRIMP U-Pb zircon dating. The dating results yield earlier eruption age of $63.77{\pm}0.94Ma$ from the lower ash-flow tuff and an later eruption age of $60.1{\pm}1.8Ma$ from the upper ash-flow tuff of the Guamsam Tuff, and intrusion age of $60.65{\pm}0.95Ma$ from the rhyolite ring dyke of the Post-collapse intrusions. The age data suggest that the Guamsan caldera is formed in 60.65~60.1 Ma between eruption of the upper ash-flow tuff and intrusion of the rhyolite ring dyke. The Guamsan cadera exhibits the volcanic processes of a perfect igneous cycle passing from ash-flow eruptions through caldera collapse to ring intrusions during 63.77~60.1 Ma.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.4
• /
• pp.237-249
• /
• 2019

The volcanic rocks around the Jayang caldera are classified in an order such as Jukjang Volcanics, Doil Rhyolite, Unjusan Tuff and Rhyolite intrusions. By the SHRIMP U-Pb zircon datings from zircons, eruption ages of the Unjusan Tuff are constrained as 66.65±0.96 Ma in the intracaldera, and 66.08±0.62 Ma in the extracaldera outflow, and intrusion age of the ring dike is investigated as 60.74±0.66 Ma. The age data indicate that the caldera was collapsed between 66.08 Ma and 60.74 Ma, just before the dike intruded after the explosive eruption of the Unjusan Tuff. The Jayang caldera shows the composite igneous process of a perfect volcanic cycle passing from ash-flow tuffs through caldera collapse into ring dikes in the Jayang area.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.3
• /
• pp.171-182
• /
• 1999

The Myeonbongsan caldera, 10.2X8.0 km, developed within older sequences of sedimentary formations and intermediate composition volcanis in the southern Cheongsong area. Volcanic rocks in the caldera block include lower intermediate volcanics, middle tuffaceous sequences and upper silicic ones. The silicic volcanics, which is named Myeonbongsan Tuff, are composed of crystal-rich ash-flow tuff(300 m) , bedded tuff(30 m) and pumice-rich ash-flow tuff(700 m) in ascending order. Several intrusions dominate the early sequences within the caldera. The caldera collapsed in a trapdoor type when silicic ash-flow tuffs erupted fro major vent area in the caldera. Normal faulting along a ring fault system except the southwestern part dropped the tuffs down to the northrase with a maximum displacement of about 820 m. The Myeonbongsan Tuff is just about 1,030 m thick inside the northeastern caldera, with its base not exposed, and southwestward thinning down. Rhyolitic plug and ring dikes are emplaced along the central vent and the caldera margins, and the ring dikes are cut by plutonic stocks in the southeastern and northwestern parts. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was erupted to form the Myeonbongsan Tuff. Following the last ash-flow eruption, collapse of the chamber roof resulted in the formation of the Myeonbongsan caldera, a subcircular trapdoor-type depression subsiding about 820 m deep. After the collapse, stony to flow-banded rhyolites were emplaced as circular plugs and ring dikes along the central vent and the caldera margins respectively. Finally after the intrusions, another plutons were emplaced as stocks outside the caldera.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.35-48
• /
• 2021

The Gumi basin, situated in the mid-southeastern Yeongnam Massif, has the Cretaceous stratigraphy that is divided into Gumi Formation, andesitic rocks (Yeongamsan Tuff, Busangni Andesite), rhyolitic rocks (Obongni Tuff, Doseongul Rhyolite, Geumosan Tuff) and Intrusives (ring dikes, other dikes) in ascending order. The Geumosan Tuff is composed mostly of many ash-flow tuffs which are associated with Geumosan caldera along with the ring dikes. The caldera is outlined by ring faults and dikes and has about 3.5 × 5.6 km in diameters. The intracaldera volcanics show a downsag structure that is dipped inward in their flow and welding foliations. The caldera block represent an asymmetric subsidence, which drops 350 m in the northern margin and 600 m in the southern one. Based on these data, the Geumosan caldera is geometrically classified as an asymmetric piston subsidence caldera that suggests a single caldera cycle. The caldera reflects the piston subsidence of the caldera block bounded by the outward-dipping ring faults following a voluminous eruption of magma from the chamber. The downsag in the caldera block refers to the downsagging during the initial subsidence at the same time as the full development of the bound fault. In the ring fissures following the sagging, magma was injected due to the overpressure of magma chamber caused by subsidence.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.512-512
• /
• 2017

날로 심각해지는 해수 오염, 유류사고, 해파리에 의한 인명피해 및 발전소의 경제적 피해사고, 해양 쓰레기 등과 같은 해양 환경 문제가 발생하고 있다. 이러한 해양환경문제를 해결하기위해 생물학적 방법과 물리적 방법이 있으나 생물학적 방법은 개체군과 종류의 변화로 그 적용이 어려운 실정이고, 물리적 방법은 지속적인 제거를 위한 비용적인 문제와 인부 및 자원봉사자의 안전문제가 발생한다. 따라서 에어버블을 이용한 각종 친환경적 방법이 주목받고 있다. 본 연구에서는 에어버블 차단막의 차단율을 증가시키기 위해 현장조건 내에서 에어버블의 거동특성에 대한 실험을 하였다. 실험을 위해 회류식 개수로 에어버블 거동실험장치를 제작하였다. 실험장치는 길이 8.1m, 높이 1.2m, 폭 0.7m이며, 두께 10mm의 투명 아크릴를 사용하여 에어버블의 거동을 관찰 할 수 있게하였다. 대형펌프를 사용하여 물이 회류함을 통해 흐름유속을 만들어 현장조건을 고려하였다. 에어버블을 분사하기 위해 압축공기 저장탱크와 연결된 분사구가 있으며, 노즐의 크기(0.5mm~1.0mm)로 분사량을 조절하고 분사압은 별도의 조절장치를 이용하여 0~5bar 범위의 분사압 조절을 가능하게 하였다. 초고속 카메라와 3축유속계를 사용하여 에어버블의 이동경로, 유속 및 에어버블의 거동을 측정하였다. 실험을 통한 구간별 에어버블의 거동 분석 결과, 상승속도는 분사구에서 분출되는 구간인 0~0.8m 에서는 상승속도가 증가하고, 0.8~1.2m구간에서는 속도가 다시 상승하는 경향을 확인하였다. 이는 수표면에 가까워질수록 수압이 작아져서 에어버블의 크기가 커짐에 따라 부력이 커짐으로 판단된다. 같은 이유로 분사량이 많을수록 상승속도도 같이 증가되는 것으로 나타났다. 유속에 따른 거동은 유속을 0.1m/s~0.5m/s로 조정하여 유속별 에어버블이 수표면까지 도달하는 거리, 속도 및 이동경로를 분석하였다. 유속과 에어버블이 수표면까지 도달하는 거리는 비례하여 증가하는 것을 확인하였다. 실험결과를 바탕으로 조건에 따른 에어버블 거동 경험식을 도출하였다. 본 실험은 회류식 개수로 에어버블 거동실험장치를 활용하여 에어버블 거동 경험식을 제시하였으며, 이를 바탕으로 에어버블 차단막 기술 개발을 위한 기초자료로 이용될 수 있을 것이다.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.57-82
• /
• 2008

The volcanic sequence of the late Cretaceous Moonyu volcanic mass which distributed in the southwestern part of Ryeongnam massif, can be divided into felsic pyroclastic rocks, andesite and andesitic pyroclastic rocks, rhyolite in ascending order. The earliest volcanic activity might commence with intermittent eruptions of felsic magma during deposition of volcaniclastic sediments. Explosive eruptions of felsic pyroclastic rocks began with ash-falls, to progressed through pumice-falls and transmitted with dacitic to rhyolitic ash-flows. Subsequent andesite and andesitic pyroclastic rocks were erupted and finally rhyolite was intruded as lava domes along the fractures near the center of volcanic mass. Petrochemical data show that these rocks are calc-alkaline series and have close petrotectonic affinities with subduction-related continental margin arc volcanic province. Major element compositions range from medium-K to high-K. Petrochemical variation within the volcanic sequence can be largely accounted for tractional crystallization processes with subordinate mixing. The most mafic rocks are basaltic andesite, but low MgO and Ni contents indicate they are fractionated by fractional crystallization from earlier primary mafic magma, which derived from less than 20% partial melting of ultramafic rocks in upper mantle wedge. Based on the stratigraphy, the early volcanic rocks are zoned from lower felsic to upper andesitic in composition. The compositional zonation of magma chamber from upper felsic to lower andesitic, is interpreted to have resulted from fractionation within the chamber and replenishment by an influx of new mafic magma from depth. Replenishment and mixing is based on observations of disequilibrium phenocrysts in volcanic rocks. REE patterns show slight enrichment of LREE with differentiation from andesite to rhyolite. Rhyolite in the final stage can be derived from calc-alkaline andesite magma by fractional crystallization, but it might have underwent crustal contamination during the fractional crystallization.