• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.551-556
• /
• 2007

High pressure storage of the agent gas in fire suppression system was composed of tank, main valve and safety valve, which prevents the fracture of the high pressure storage. The safety valve has circular thin plate as fracture plate that was destroyed over fracture pressure. When inner pressure of the storage is reached the fracture pressure, the safety valve discharges gas and degrades simultaneously the inner pressure of the storage. There are design variables such as flow path diameter, inner diameter of the plastic packing ring, thickness of plate and fillet radius. In this variables, thickness of plate is set to be a value of 0.2mm. The main effect of variables on the inner pressure, has been decided using factorial design and statistical analysis. Therefore, the relation of variables are expressed by regression equation. It is disclosed results that the difference of fracture pressures between the equation and experiment has $2{\sim}5%$. Finally, using response surface method, the optimal design of the safety valve could be decided with safety pressure of 25MPa, where the fracture occurs on circular thin plate.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.707-716
• /
• 2006

When the regression function is discontinuous at a point, the variance function is usually discontinuous at the point. In this case, we had better propose a test for the existence of a discontinuity point with the regression function rather than the variance function. In this paper we consider that the variance function only has a discontinuity point. We propose a nonparametric test for the existence of a discontinuity point with the second moment function since the variance function and the second moment function have the same location and jump size of the discontinuity point. The proposed method is based on the asymptotic distribution of the estimated jump size.

• The Korean Journal of Applied Statistics
• /
• v.23 no.5
• /
• pp.909-921
• /
• 2010

Cross-wave regression imputation and carry-over imputation method are generally used in the analysis of panel data with missing values. Recently it is known that the BLS non-response adjust method has good statistical properties. In this paper we show that the BLS method can be considered as an imputation method with a similar formula of a ratio-estimator. In addition, we show that the carry-over imputation and BLS imputation are approximately the same under the assumption that data follow a non-stationary process with drift. Small simulation studies and real data analysis are performed. For the real data analysis, a monthly labor statistic (2007) is used.

• The Korean Journal of Applied Statistics
• /
• v.7 no.1
• /
• pp.19-34
• /
• 1994

In this paper we propose nonparametric tests of parallelism against umbrella alternatives of slopes in k-regression lines and investigate the asymptotic properties of the proposed test statistics. For the known peak and unknown peak, we suggest the test statistics and show that, from Monte Carlo study, the proposed test statistics have good empirical powers for heavy tailed distributions than the likelihood ratio tests.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.83-87
• /
• 2007

Elastic critical loads of sinusoidally tapered bars with simply supported ends are determined by finite element method. The parameters considered in the analysis are taper parameter (=a) and section property parameter (=m). The analysis result for the special case of porismatic bar (a=0) shows good agreement with the existing value. The changes of the critical load coefficients are expressed by an algebraic equation. The coefficients appearing in the equations are determined by regression technique. The critical loads coefficients estimated by the proposed equations reveal little errors when they are compared with those determined by finite element method.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.237-245
• /
• 1993

A nonparametric test for the parallelisim of k regression lines against ordered alternatives is proposed. The test statistic is weighted Jonckheere-type statistic applied to slope estimators obtained from each lines. The distribution of the proposed test statistic is asymptotically distribution-free. From the viewpoint of efficiencies, the proposed test desirable properties and is more efficient than the other nonparametric tests.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.178-178
• /
• 2021

최근 들어 기후변화로 인한 극심한 가뭄 피해가 한반도에 발생하고 있다. 가뭄 상황에 대비하여 댐을 안정적으로 운영하기 위해서는 갈수빈도 유입량에 대한 분석이 필수적이다. 갈수빈도해석의 경우, 홍수빈도해석과 유사하게 확률밀도함수의 극값에 대한 확률값을 산정하며, 확률 분포형의 역함수에 비초과확률을 대입하여 산정한다. 그러나 홍수와 달리 가뭄은 지속기간이 긴 특성 탓에 자기상관을 고려해야하며, 댐 및 저수지 등 대규모 시설물의 경우 일반적인 하천과 달리 저류효과로 인해 누적 유량에 대한 고려가 필요하다. 이에 K-water는 자체 제작한 누가차분법 및 Disaggregation 두 가지 방법을 채택하여 실무에서 사용해왔다. 그러나 누가차분법을 사용할 경우, 빈도유입량이 지나치게 크게 산정되는 문제가 있으며, Disaggregation 방법을 사용하는 경우, 특정 빈도 이상의 극한가뭄에서 유입량의 차이가 유의미하지 않아 산정된 빈도유입량과 최근 발생한 극심한 가뭄의 실측유입량간 큰 차이가 발생하고 있다. 따라서 본 연구에서는 자기상관을 고려한 선형회귀모형에 근거하여 빈도유입량을 배분하는 방법을 제안한다. 또한, 앞서 서술한 네 가지 빈도유입량 방법(월빈도분석, 누가차분법, K-water Disaggregation, 자기상관 선형회귀모형)에 대한 수식적 비교를 수행하며, 국내 댐 유역에 적용 및 평가를 통해 자료 특성에 따른 적절한 빈도유입량 산정방식에 대한 기준을 제안한다. 본 연구를 통해 가뭄특성을 고려한 합리적인 댐 유입량을 산정함으로써 보다 유연한 수자원시설물의 가뭄대응이 이루어질 것으로 기대된다.

• The Korean Journal of Applied Statistics
• /
• v.26 no.3
• /
• pp.511-520
• /
• 2013

Detection outliers and robust estimators are crucial in regression models with outliers. In such studies the focus is on detecting outliers and estimating the coefficients using leave-one-out. Our study introduces Rice estimator which is an error variance estimator without estimating the coefficients. In particular, we study a comparison of the statistical properties for Rice estimator with and without outliers in simple regression models.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.2
• /
• pp.183-183
• /
• 1991

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.49-58
• /
• 2004

The first and perhaps the most critical and perhaps the most important step in the process of predicting future traffic volume in a region (Zone) is to estimate the number of trips generated in from each traffic analysis zone. Most trip generation models for urban transportation planning, and highway in Korea are regression models. In Korea the category analysis has not been tried for last decades since the proper data such as the household travel behavior data have not been collected. Recently, the comprehensive household travel behavior survey such as ${\ulcorner}$1996 The Household Travel Behavior Survey${\lrcorner}$, ${\ulcorner}$2002 The Household Travel Behavior Survey${\lrcorner}$ has been done. In this paper, the cross-classification tables of Seoul Metropolitan Area including the City of Seoul and Kyonggi Province are estimated by the category analysis. The tables are compared with regression models and ${\ulcorner}$2002 The Household Travel Behavior Survey${\lrcorner}$ data in terms of predictive capabilities in Seoul Metropolitan Area. Improvement strategies for trip generation forecast in Seoul Metropolitan Area are proposed.