• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.203-209
• /
• 2023

Cobalt sulfide nanocomposites were synthesized through a simple hydrothermal method as anode materials for sodium ion batteries (SIBs). In this work, a cobalt sulfide nanoparticle (CoS-NF) and a cobalt sulfide nanocomposite integrated with reduced graphene oxide (CoS@G-NC) were fabricated for electrochemical energy storage performance of battery. The as-prepared CoS@G-NC electrode exhibited reversible and stable cycle performance (62 % after 30 cycles at current density of 200 mA g^-1). The improved electrochemical property was attributed to the small grain growth and uniform distribution of cobalt sulfide during synthesis, which maximized the diffusion pathway for sodium ions and effectively suppressed the delamination and volume expansion of cobalt sulfide during the conversion reaction. The results provide promising anode materials for next-generation SIBs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.326-326
• /
• 2012

ZnS를 합성하는 방법 중 thioacetamide (TAA)를 녹인 물에 ZnO template를 넣어서 황화시키는 방법이 있다. 이 방법은 실험과정이 간편할 뿐만 아니라 그 반응양의 조절도 용이해 ZnS-ZnO core-shell 구조나 ZnS hollow 구조 등을 만드는데 널리 사용되고 있다. 그러나 다양한 형태의 ZnS 구조체 합성에 관한 연구는 활발한 반면, ZnS의 상형성 과정이나 구조 변화와 같은 ZnO의 황화 과정 기구에 관한 연구는 매우 미비한 실정이다. ZnS는 기본적으로 저온에서는 cubic sphalerite 구조를, 고온에서는 hexagonal wurtzite 구조를 안정상으로 가진다. 또한, 8H나 15R 등과 같은 다양한 polytype 구조도 존재한다. 그러나 다양한 구조에서 비슷한 면간거리가 존재하기 때문에 결정구조의 분석이 어려운 실정이다. 이러한 비슷한 면간거리를 가지는 ZnS 등의 결정구조 분석에 있어 원자배열을 직접적으로 관찰할 수 있는 투과전자현미경 (TEM, transmission electron microscopye)을 이용한 연구는 큰 강점을 가진다. 본 연구에서는 다공성 ZnO 막을 황화시켜 형성된 ZnS 막의 미세구조 특성을 분석하였다. 다공성 ZnO 막은 패턴된 Si (111) 기판 위에 스핀코팅법을 이용하여 4,000 rpm의 속도로 증착되었으며 ZnO 결정화를 위해 150 도와 500도에서 각각 drying과 후열처리를 수행하였다. 이렇게 만들어진 ZnO 막을 TAA를 녹인 물에 넣어 48 시간 동안 반응시켰고 최종적으로 ZnS 막을 생성하였다. 다공성 ZnS 막의 미세구조를 분석하기 위해 주사전자현미경 (SEM, scanning electron microscope), X-선 회절분석기 (XRD, x-ray diffractometer), 그리고 투과전자현미경을 이용하였으며, 정확한 결정구조 분석을 위하여 결정구조 시뮬레이션을 병행하였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.396-399
• /
• 2004

산화환경에 노출된 폐광석에 포함되어 있는 황화광물은 산소와 물과의 화학반응을 통해 산화작용을 받게 되고, 이로 인하여 Fe, Mn, Pb, Zn, Cu 및 As등의 원소의 용해반응이 발생할 것으로 예상된다. 그러나 이와 같이 용해된 금속이온은 pH등 환경의 변화에 따라 2차광물(산화광물 및 황산염광물)로 침전되거나 흡착되어 수용액으로부터 제거되어 자연적으로 고정화 될 수 있다. 이처럼 황화광물의 산화작용에 의해 형성된 2차광물에 대한 광물학적 연구는 광산복원을 결정하는데 직접적인 지구화학적 자료로 활용될 수 있다. 삼산제일광산에 방치된 폐광석을 대상으로 XRD, SEM/EDS을 이용하여 광물학적 연구를 수행한 결과 침전과 공침, 흡착 등의 화학반응을 통하여 현재 고정화되고 있는 것이 확인되었다.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.207-215
• /
• 2014

Wastewater containing heavy metals such as copper (Cu) and nickel (Ni) is harmful to humans and the environment due to its high toxicity. Crystallization in a fluidized bed reactor (FBR) has recently received significant attention for heavy metal removal and recovery. It is necessary to find optimum reaction conditions to enhance crystallization efficacy. In this study, the effects of crystallization reagent and pH were investigated to maximize crystallization efficacy of Cu-S and Ni-S in a FBR. CaS and $Na_2S{\cdot}9H_2O$ were used as crystallization reagent, and pH were varied in the range of 1 to 7. Additionally, each optimum crystallization condition for Cu and Ni were sequentially employed in two FBRs for their selective removal from the mixture of Cu and Ni. As major results, the crystallization of Cu was most effective in the range of pH 1-2 for both CaS and $Na_2S{\cdot}9H_2O$ reagents. At pH 1, Cu was completely removed within five minutes. Ni showed a superior reactivity with S in $Na_2S{\cdot}9H_2O$ compared to that in CaS at pH 7. When applying each optimum crystallization condition sequentially, only Cu was firstly crystallized at pH 1 with CaS, and then, in the second FBR, the residual Ni was completely removed at pH 7 with $Na_2S{\cdot}9H_2O$. Each crystal recovered from two different FBRs was mainly composed of CuxSy and NiS, respectively. Our results revealed that Cu and Ni can be selectively recovered as reusable resources from the mixture by controlling pH and choosing crystallization reagent accordingly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.428-428
• /
• 2016

Copper indium sulfide (selenide) (CuIn(S,Se)2,CISSe)는 1.0~1.5 eV의 Direct band gap과 105 cm-1이 넘는 큰 광 흡수 계수를 가지고 있어 박막 태양전지의 흡수층으로써 연구되어 왔다. 최근 대량생산 및 저가 공정에 용이하다는 측면에서 용액 공정 기반 CISSe 태양전지 연구가 크게 주목 받고 있다. 용액공정 기반 중 하이드라진을 사용 한 경우 매우 높은 효율을 기록하였으나, 하이드라진 자체의 유독성과 폭발성 때문에 분위기 제어가 필요하고 여전히 저가화 및 대면적 제작에 한계가 있다. 따라서 알코올 솔젤 기반 CISSe 태양전지 제작 연구가 많이 진행되었으나, 결정립 성장 및 칼코겐 원자를 공급하기 위해 불가피하게 황화/셀렌화 후속 열처리 공정을 요구한다. 후속 열처리 공정은 폭발성의 황화수소/황화셀레늄 기체 분위기 제어와 고가의 장비를 필요로 한다. 본 연구에서는 매우 안정적이며 저가 용매인 물과 아민계 첨가제를 이용하여 Cu, In 전구체와 S, Se 이 포함된 Cu-In-S 잉크와 Se잉크를 제작하였다. 잉크 내에 S, Se을 첨가 함으로써 추가적인 후속공정 없이 비활성 가스 분위기에서 고품질의 CISSe 박막 제작을 가능케 하였다. 또한 Se 잉크 증착 횟수에 따른 결정 구조, 광학적 성질의 차이에 주목하였다. 따라서 수계 잉크를 대기 중에서 스핀코팅으로 박막을 제작한 후, Hot plate에서 건조하여 균일한 박막을 제조하고, 제작된 박막을 tube furnace에서 환원 분위기 및 비활성 가스 분위기에서 열처리 진행하여 $1.3{\mu}m$ 두께의 고품질의 CISSe 흡수층을 제작하였다. 이러한 흡수층에 대해 XRD, SEM, EDS 분석을 진행하여, 결정성, 미세구조, 및 조성을 확인하였으며, 제작된 흡수층 위에 버퍼층/투명전극층을 차례로 증착하여 CISSe 태양전지를 제작하여 셀 성능 및 양자 효율 특성을 파악하였다. 또한 액상 Raman 분석을 통해 결정립 성장 과정 메커니즘을 제시하였다.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.177-189
• /
• 2003

The main purposes of this study are to utilize mineralogical studies such as optical microscope, XRD and SEM/EDS analyses to characterize the oxidation of sulfide minerals and the mechanisms controlling the movement of dissolved metals from waste rocks at the abandoned Seobo mine. Mineralogical research of the waste rocks confirms the presence of anglesite, covellite, goethite, native sulfur and nsutite as secondary minerals, suggesting that these phases control the dissolved concentrations of As, Cu, Fe, Mn, Pb and Zn. The dissolved metals are precipitated, adsorbed and/or coprecipitated with(or within) Fe(Mn)-hydroxides and Mn(Fe)-hydroxides. The main phases of secondary mineral, Fe-hydroxide, can be classified as amorphous or poorly crystalline and more crystallized phases(e.g. goethite) by crystallinity. Amorphous or poorly crystalline Fe-hydroxide has relatively high As contents(9-24 wt.%). This poorly crystalline Fe-hydroxide changes toward more crystallized phase(e.g. goethite) which contains relatively low As(0.6-7.7 wt.%). These results are mainly due to the progressive release of As with the crystallization evolution of the As-trapping poorly crystalline Fe-hydroxides. It is also attributed to the differences of specific surface areas between the poorly crystalline Fe-hydroxides and well crystallized phases. The dissolved metals from waste rocks at Seobo mine area are naturally attenuated by a series of precipitation(as Fe, Mn, Cu, Pb), coprecipitation(Fe, Mn) and adsorption(As, Cu, Pb, An) reactions. The results of mineralogical researches permit to assess the environmental impacts of mine waste rocks in the areas, and can be used as a useful data to lay available mine restoration plan.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.31-37
• /
• 2015

Composition-controlled ternary components chalcogenides germanium tin sulfide ($Sn_xGe_{1-x}S$) nanoparticles were synthesized by a novel gas-phase laser photolysis reaction of tetramethyl germanium, tetramethyl tin, and hydrogen sulfide mixture. Subsequent thermal annealing of as-grown amorphous nanoparticles produced the crystalline orthorhombic phase nanoparticles. All these composition-tuned nanoparticles showed excellent cycling performance of the lithium ion battery. The germanium sulfide nanoparticles exhibit a maximum capacity of 1200 mAh/g after 70 cycles. As the tin composition (x) increases, the capacity maintains better at the higher discharge/charge rate. This novel synthesis method of tin germanium sulfide nanoparticles is expected to contribute to expand their applications in high-performance energy conversion systems.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.300-307
• /
• 2006

Anaerobic ammonium oxidation(ANAMMOX) is a novel process fur treatment of piggery waste with strong nitrogen. In this study, we investigated acid fermentation of organic matter, denitrificatiot reduction of sulfur compounds and P crystalization by hydroxyapatite during the treatment of wastewater with high strength of ammonium and organic matters by ANAMMOX process. Also, functions of hydroxylamine and hydrazine as intermedeates of ANAMMOX process were tested. This study reveals that various complex-reactions with anaerobic ammonium oxidation of piggery waste are happened and hydroxylamine and hydrazine play an important role in ANAMMOX reaction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.585-592
• /
• 1999

This study was aimed to enhance the Fe(II) oxidation rate using immobilized cells of Thiobacillus ferroxidans. For this purpose, a medium for the minimization of jarosite formation was developed first. Secondly, cell immobilization in celite beads was carried out. And then, repeated-batch and continuous operatons of Fe(II) oxidation by using immobilization cells were performed. In a series of flask cultures, three types of media were tested: media with a much lower salt concentration than that of the 9K medium; media which contained different nitrogen sources from that of the 9K medium, that is $(NH_4)_2HPO_4$, $NH_4Cl and HNO$_3$; media which contained $(NH_4)_2HPO_4$ as nitrogen and phosphate source, but without $K_2HPO_4$ as nitrogen and phosphate source in the 9K medium. As a result, the M16 medium which contained 3 g/L of $(NH_4)_2HPO_4$ as nitrogen and phosphate source was found to be the optimal one. It sustained good cell growth allowing no jarosite formation. In the repeated-batch operations, the rate of Fe(II) oxidation gradually increased to reach a maximum value as the batch was repeated. As a result of repeated-batch operations. a maximum Fe(II) oxidation rate was 2.33 g/L . h. In the continuous operations, the iron oxidation rate could be increased to 2.14 g/L .h at a dilution rate of 0.25 $h^{-1}$ which is greater than the maximum specific growth rate (0.12 $h^{-1}$) of the bacteria.