• 한국해양학회지
• /
• v.25 no.1
• /
• pp.8-20
• /
• 1990

A series of pore water data were obtained during the different time over one year period between October 1987 and October 1988, from a site on a muddy intertidal flat, located in the Kyeong-gi Bay, west coast of Korea, The results have revealed that the tidal flat is an environment of active nutrient the subface supplied by the overlying seawater is almost completely removed from the pore water at depth of about 10 cm below the sediment surface. The nutrients such as ammonium and phosphate are produced through this process and subsequently accumulated in the pore water forming steep gradients near the sediment surface. Below the main sulfate redirection zone, a secondary peak of dissolved sulfate was often observed. Greal seasonal variation of the pore water nutrient profiles was observed, which was particularly clear in their maximum concentration as well as in their concentration gradient. The rate constants of sulfate reduction and nutrient regeneration, estimated by using a diagenetic model (Berner, 1980), differ by an order of magnitude between the summer and winter seasons. The difference in sediment temperature may account for most of the calculated variation. The C:N:P ratio, calculated from the pore water nutrient gradients also exhibits a slight seasonal difference. The organic matter being decomposed by sulfate reduction appears to be depleted in depleted in nitrogen, compared to the average marine organic matter.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.399-404
• /
• 2012

The objective of this study was to investigate the efficient pretreatment method for bioethanol production from rice hull. Ammonia and sodium hydroxide as an alkaline solution and dilute sulfuric acid as an acidic solution were used in a batch reactor under high-temperature and high-pressure conditions. The highest enzymatic saccharification efficiency of 82.8% and ash removal rate of 94.7% were obtained in the dilute sulfuric acid treated sample after the sodium hydroxide solution treatment. The enzymatic saccharification efficiencies and ash removals of pretreated rice hull samples have very similar variation tendency. This means that the maximum obstructive factor for the enzymatic saccharification of rice hull is the ash (silicate) content in biomass. The findings suggest that the combined sodium hydroxide-dilute sulfuric acid treatment system under high-temperature and high-pressure conditions is a promising pretreatment method to enhance the enzymatic saccharification of the silica-rich biomass.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.181-187
• /
• 2006

In this study, problems related with pH control in electrokinetic(EK) bioremediation of phenanthrene contaminated soil were observed, and the effects of pH control methods on the removal efficiency were investigated to search a further application strategy. In a preliminary experiment, it was found out by flask cultivation that a certain sulfate concentration was needed to degrade phenanthrene well using Sphingomonas sp. 3Y. However, when $MgSO_4$ was used as sulfate source in EK bioremediation, the bacterial activity reduced seriously due to the abrupt decrease of pHs in soil and bioreactor by the combination of magnesium and hydroxyl ions. When another strong buffering compound was used to control the pH problem, the good maintenance of the bacterial activity and pHs could be observed, but the removal efficiency decreased largely. When a low concentration of $MgSO_4$ was added, the removal efficiency decreased somewhat in spite of the good maintenance of neutral pHs. With the addition of NaOH as a neutralizing agent, the removal efficiency also decreased because of the increase of soil pH. Consequently the selection of electrolyte composition was a very important factor in EK bioremediation and some sulfate sources suitable for both bacterial activity and contaminant degradation should be investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.217-224
• /
• 2017

This is a study on the removal of nitrate nitrogen from wastewater by oxidation and reduction reaction of zinc in an acidic atmosphere. The optimum removal rate of nitrate nitrogen and the optimum pH were studied by controlling the amount of zinc and sulfamic acid. The oxidation efficiency was higher at pH 2.0 in the range of pH 2.0 ~ 4.0 because the reaction occurred more strongly in strong acidic atmosphere. It is advantageous to reduce the nitrate ion to the final nitrogen gas by adding the sulfamic acid to the sulfurous acid because it consumes less $H^+$ ion than when the sulfamic acid is not present. According to the same amount of zinc, nitrate nitrogen was removed by 46.0% while sulfamic acid was not added, whereas nitrite nitrogen was removed by 93.0% by adding sulfamic acid. In addition, In this experiment, zinc was prepared in powder form and its reactivity was larger than that of other common zinc metal, so the removal efficiency was very high, about 80.0%, within one minute after the reaction.

• Korean Journal of Organic Agriculture
• /
• v.15 no.2
• /
• pp.219-228
• /
• 2007

강원도 고랭지는 채소 재배지로 그 이용 면적이 매년 급속히 증가하고 있다. 금한 경사와 집중적으로 발생하는 장마철의 폭우는 토양 유실은 물론이고 토양 비옥도의 심각한 저하를 초래할 위험이 경작의 강도와 범위가 넓어짐에 따라 더욱더 증가하고 있다. 또한 험한 지형에 따른 기계화 영농의 어려움과 이에 수반하는 노동력의 낭비로 문제점을 제기한다. 채소 작물 재배를 위해 많이 사용하는 요소 비료, 황산암모늄 비료와 함께 특별히 수지(resin)를 피막 처리한 복합비료를 가지고 배추의 생장과 토양에 미치는 영향을 조사하였다. 수지 피막처리는 각각 7, 10, 15%의 비율로 혼합했다. 배추의 수량은 실험에 사용된 비료간에 큰 차이가 없었다. 요소와 황산암모늄은 기본 시비와 함께 2차례 추비를 하였고 수지 피막 복합 비료는 단 한번 초기에 시비하였다. 따라서 이 경우 노동력 절감과 토양 환경 교란의 최소화를 달성할 수 있었으므로 완효성의 수지 피막 처리 비료가 바람직한 것으로 나타났다. 토양에 미치는 효과는 비료의 종류간에 별다른 차이가 없었으나 인산$(P_2O_5)$의 토양내 축적 현상이 t지 피막 처리 복합 비료 시용 구에서 뚜렷하게 조사되었다. 일반적으로 화학 비료의 시용은 토양 반응(pH)의 저하를 초래하였다.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.340-344
• /
• 2006

We prepared porous cation exchange membrane using polystyrene such as, EPS (expanded polystyrene), SAN (styrene acrylonitrile copolymer) and HIPS (high impact polystyrene). These three kind of polystyrene were sulfonated by acetyl sulfate to make sulfonated porous cation exchange membrane such as, SEPS (sulfonated expanded polystyrene), SSAN (sulfonated styrene acrylonitrile copolymer)and SHIPS (sulfonated high impact polystyrene). SEM was employed to validate porous structure of membrane, and IR spectroscopy was used to validate sulfonation rate of ion exchange membrane. As a results, ion exchange capacity was increased with an amount of sulfuric acid in reactants and cation exchange membrane showed the selectivity to a cation and showed the exclusivity to an anion.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.221-228
• /
• 2002

AMX is one of extremely high mutagenic compound produced from the reaction of the chlorine and the organic compound during the disinfection of tap water. In this paper, the chemical derivatization of MX with 2% sulfuric acid-methanol, iso-propanol, sec-butanol and n-butanol derivatives for the GC/MS analysis were tested or compared. Limit of detection for the EI and NCI mode were 25 pg and 1.25 pg, respectively. The good linear calibration curve was obtained the range of 25~2500 pg by EI and NCI

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.587-593
• /
• 2011

As a result of increasing environmental concerns related to air quality and maintenance of automobiles, the alkylation of isobutane with olefins has become an even more important process for production of high quality gasoline. However, the widespread use of the alkylation process is limited by the polluting and corrosive liquid acid catalysts (HF and $H_2SO_4$) currently used in industry. For the reason, a large number of solid catalysts, especially zeolites, have been studied as an environmental friendly catalyst in this process. Recently, mesoporous solid acids and ionic liquids have been investigated as a green catalyst. In this review, the research of environmental friendly catalysts for an isobutane alkylation is summarized.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.505-509
• /
• 2012

In this study, we investigate the use of new carbon nanotube paste electrode (CNPE) for promoting the detection of lead (Pb) heavy metal in the a drinkable water, which negatively affects human brain and nerve system. For the evaluations, CNPE is served as a working electrode, while sensitivity and limit of detection (LOD) of Pb are measured in DI and tap water based electrolytes using squarewave anodic stripping voltammetry (SWASV). As a result of that, in the 25~150 ppb range of $Pb^{2+}$ ions, its sensitivity and calculated LOD are $12.85\;{\mu}A/{\mu}M$ and 26 ppb in DI water based 0.1 M $H_{2}SO_{4}$ electrolyte while they are $10.36\;{\mu}A/{\mu}M$ and 38 ppb electrolytes respectively. In addition, experimentally measured LOD values of Pb are 4 ppb and 10 ppb in the two water electrolytes. The stripping of $Pb^{2+}$ ion is also controlled by surface reaction. Our experimental data are then compared with those of other already published references. With the comparison, it is proved that our electrode outperforms other electrodes in terms of the sensitivity and LOD of trace Pb metal.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.557-560
• /
• 2009

In this study, a new wet etching method and the solution for thinning the glass with the thickness below $100{\mu}m$ were investigated. For the preparation of etching solution with low hydrofluoric acid, it was effective to use $NH_4F$ or $NH_4HF_2$ as a main ingredient with the addition of sulfuric acid or nitric acid. Influence of the composition of mixed acid solution and the temperature on the etching rate was investigated. The addition of anionic surfactant provides the function to prevent the adhesion of sludge generated by the etching reaction. A new wet etching pilot device equipped with streaming generation parts was used to test etching of commercial non-alkali glass and soda lime glass. The non-alkali glass with the thickness of 640 ${\mu}m$ and soda lime glass with the thickness of $500{\mu}m$ were etched to $45{\mu}m$ and $100{\mu}m$, respectively, by using the pilot device. After the etching by pilot device, the roughness degree of the glass surface was maintained at $0.01{\sim}0.02{\mu}m$.