• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.89-94
• /
• 2023

Recently, domestic small airport development plans are being promoted centering on islands, and among them, Baengnyeong Island Airport is located very close to North Korea due to its geographical characteristics. In particular, since it is located in the P-518, which is prohibited airspace, it is essential to configure the arrival/departure flight procedure route similarly to the current ship in terms of securing flight safety. Therefore, in this study, a plan for airport location and facility scale was proposed by focusing on the runway operated for the purpose of aircraft operation through consultations with the Ministry of National Defense. It was proposed to meet the standards of the Airport Facility Act as an airport dedicated to domestic flights for airside facilities such as runway length and direction, target aircraft, landing pad, apron, runway and taxiway width appropriate for the topographical characteristics of Baengnyeong Island. As a result, the flight procedure is generally established as a two-way visual flight, but the 10-way arrival/departure procedure was planned to be changed to an instrument (non-precision) according to the specificity of the region. In addition, a flight procedure was established and presented for safe and systematic operation by reflecting the changes in airport facility size (landing pad, runway end safety area, etc.) following the change in instrument flight procedure in the visual flight procedure.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.185-192
• /
• 2024

The aviation has improved safety through technological innovation and strengthened flight safety through safety regulations and supervision by aviation authorities. As the industry's safety approach has evolved into a systematic approach to the aircraft system, airlines have established a safety management system. Technical defects or abnormal data in an aircraft can be warning signs that could lead to an accident, and the risk of an accident can be reduced by identifying and responding to these signs early. Therefore, management of abnormal warning signs is an essential element in promoting data-based decision-making and enhancing the operational efficiency and safety level of airlines. In this study, we present a model to statistically analyze quick access recorder (QAR) flight data in the preliminary analysis stage to analyze the patterns and causes of crab landing events that can lead to runway departures when landing an aircraft, and provide a precursor to a landing event. We aim to identify signs and causes and contribute to increasing the efficiency of safety management.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.253-260
• /
• 2004

Frictional force between the orthodontic bracket and arch wire during sliding tooth movement is related to many factors, such as the size, shape and material of both the bracket and wire, ligation method and the angle formed between the bracket and wire. There have been clear conclusions drawn in regard to most of these factors, but as to the effect of bracket width on frictional force there are only conflicting studies. This study was designed to investigate the effect of bracket width on the amount of frictional forces generated during clinically simulated tooth movement. Three different widths of brackets $(0.018{\times}0.025'\;standard)$ narrow (2.40mm), medium (3.00mm) and wide (4.25mm) were used in tandem with $0.016{\times}0.022'$ stainless steel wire. Three bracket-arch wire combinations were drawn on for 4 minutes on a testing apparatus with a head speed of 0.5mm/min and tested 7 times each. To reproduce biological conditions, dentoalveolar models were designed with indirect technique using a material with similar elastic properties as periodontal ligament (PDL). In addition, to minimize the effect of ligation force, elastomer was used with added resin, which was attached to the bracket to make up for the discrepancies of bracket width. The results were as follows: 1. Maximum frictional force for each bracket-arch wire combination was: Narrow (2.40mm): $68.09\pm4.69gmf$ Medium (3.00mm): $72.75\pm4.98 gmf$ Wide (4.25mm): $72.59\pm4.54gmf$ 2. Frictional force was increased with more displacement of wire through the bracket slot. 3. The ANOVA psot-hoc test showed that the bracker width had no significant effect on frictional force when tested under clinically simulated conditions(p>0.05).

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.125-135
• /
• 2006

The purpose of this study was to measure and compare the level of frictional resistance generated from three currently used ceramic brackets; 1, Crystaline $V^{(R)}$, Tomy International Inc., Tokyo, Japan; 2, $Clarity^{(R)}$, 3M Unitek, Monrovia, CA, USA; 3, $Inspire^{(R)}$, Ormco, Orange, CA, USA; with composite resin brackets, Spirit, Ormco, Orange, CA, USA; and conventional stainless steel brackets, Kosaka, Tomy International Inc., Tokyo, Japan used as controls. In this experiment, the resistance to sliding was studied as a function of four angulations $(0^{\circ},\;5^{\circ},\;10^{\circ}\;and\;15^{\circ})$ using 2 different orthodontic wire alloys: stainless steel (stainless steel, SDS Ormco, Orange, CA, USA), and beta-titanium (TMA, SDS Ormco, Orange, CA, USA). After mounting the 22 mil brackets to the fixture and $.019{\times}.025$ wires ligated with elastic ligatures, the arch wires were slid through the brackets at 5mm/min in the dry state at $34^{\circ}C$. Silica-insert ceramic brackets generated a significantly lower frictional force than did other ceramic brackets, similar to that of stainless steel brackets. Beta-titanium archwires had higher frictional resistance than did stainless steel, and all the brackets showed higher static and kinetic frictional force as the angulation increased. When the angulation exceeded $5^{\circ}$, the active configuration emerged and frictional force quickly increased by 2.5 to 4.5-fold. The order of frictional force of the different wire-bracket couples transposed as the angle increased. The silica-insert ceramic bracket is a valuable alternative to conventional stainless steel brackets for patients with esthetic demands.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.72-78
• /
• 2010

Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.245-254
• /
• 2006

While orofacial pain or various dental factors are generally considered as the primary cause of unilateral chewing tendency, there exist several studies indicating that dental factors did not affect the preferred chewing side. The aim of this study was to examine difference of occlusal scheme between the subjects with and without chewing side preference. The difference between the chewing and non-chewing sides in the unilateral chewing group was investigated as well. Computerized, T-Scan II system was used for occlusal analysis. 20 subjects for the unilateral chewing group (mean age of $25.25{\pm}2.84$ years) and 20 subjects for the bilateral chewing group (mean age of $27.00{\pm}5.07$ years) were selected by a questionnaire on presence or absence of chewing side preference and those with occlusal problem or pain and/or dysfunction of jaw were excluded. T-Scan recordings were obtained during maximum intercuspation and excursion movement. The number of contact points, relative occlusal force ratio between right and left sides, tooth sliding area and elapsed time throughout the maximum intercuspation were calculated. Elapsed time for excursion was also investigated. The results of this study shows that the unilateral chewing group had the smaller average tooth contact areas compared with those of the bilateral group (p<0.005). In the unilateral chewing group, the contact areas of non-chewing side are smaller than those of chewing side (p<0.005). The contact areas on their preferred sides were not significantly different with those of right or left side of the subjects without chewing side preference. There was no significant difference in the elapsed time during maximum intercuspation and lateral excursion, the sliding areas and relative of right-to-left occlusal force ratio between the two groups. From the results of this study, it is likely that individuals prefer chewing on the side with more contact areas for efficient chewing.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.267-290
• /
• 2018

This paper reviews and criticizes the EU Case of C-452/13, Germanwings GmbH v. Ronny Henning. Under this case, Ronny Henning later sued Lufthansa's budget carrier Germanwings after it refused to pay him 250 euros compensation for a delay he said totalled more than three hours. Germanwings, however, maintained his flight had arrived only two hours and 58 minutes behind schedule. In those circumstances, the following question to the European Court of Justice (ECJ) for a preliminary ruling: What time is relevant for the term time of arrival used in Articles 2, 5 and 7 of Regulation [No 261/2004]: (a) the time that the aircraft lands on the runway (touchdown); (b) the time that the aircraft reaches its parking position and the parking brakes are engaged or the chocks have been applied (in-block time); (c) the time that the aircraft door is opened; (d) a time defined by the parties in the context of party autonomy? ECJ says that the situation of passengers on a flight does not change substantially when their aircraft touches down on the runway at the destination airport, when that aircraft reaches its parking position and the parking brakes are engaged or when the chocks are applied, as the passengers continue to be subject, in the enclosed space in which they are sitting, to various constraints. Therefore, it is only when the passengers are permitted to leave the aircraft and the order is given to that effect to open the doors of the aircraft that the passengers may in principle resume their normal activities without being subject to those constraints. ECJ rules that it is apparent that Articles 2, 5 and 7 of Regulation No 261/2004 must be interpreted as meaning that the concept of 'arrival time', which is used to determine the length of the delay to which passengers on a flight have been subject, corresponds to the time at which at least one of the doors of the aircraft is opened, the assumption being that, at that moment, the passengers are permitted to leave the aircraft.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.271-281
• /
• 2001

The Purpose of this study was fourfold - to evaluate the general laws of friction applied to orthodontic conditions, to compare archwire materials under these controlled conditions, to compare ligation method, and to measure the effect of the artificial saliva on friction with these materials Three wire alloys (Cobalt-chromium, Nickel-titanium, Beta-titanium) in two size wires (.016" , .016" ${\times}$.022" ) were examined respect to the bracket (.018" ${\times}$.025" standard), and two ligature material (stainless steel, elastomeric) in dry and wet conditions The results were as follows, 1. The order of frictional force against alloy materials was Co-Cr (lowest), Ni-Ti, and ${\beta}$-Ti(highest) - with the exception of elastomeric ligation under wet conditions. 2. S.S. ligation gave rise to significantly greater friction than elastomeric ligation did. 3. Testing in the presence of saliva, rather than in dry conditions, decreased the frictional force for S.S. ligation with .016" Co-Cr, Ni-Ti, ${\beta}$-Ti. but, increased the frictional force for S.S. ligation with .016" ${\times}$ .022" Co-Cr, Ni-Ti, ${\beta}$-Ti. 4. .016" ${\times}$.022 " wire generated more friction than .016" wire.

• Journal of the Korean Geographical Society
• /
• v.39 no.1
• /
• pp.27-44
• /
• 2004

Upper reach of Soyang River at the northernmost area around Taebaek Mountains in South korea is profitable area to understand paleo-environment during the Quaternary such as tectonic process and climate change in the Korean Peninsula. This study explained paleo-environment affect to channel development by geomorphic distribution and characteristics of terrace surfaces, and analysis of deposits at 58 fluvial terraces in upper reach of Soyang River. Fluvial terraces were classified from T1 to T6. Most terraces are distributed on the point bar in meandering channel and one side along river valley. Terraces tend to decrease in number and superficial dissection rate to be higher and channel slope to be steeper if it takes long time from T1 to 6. The paleo-channel of Soyang River is supposed to be stronger meandering in period of T2 than T3. The weathering rind of gravel is generally thicker in older terrace, however, differs by contents of water and air in deposits. Based on the data of stratigraphy, grain size analysis, pollen analysis and rubification index in deposit, formation age of T5 terrace in Soyang River are estimated in MIS(Marine Oxygen Isotope Stage) 10, and T2 terrace are estimated in MIS 6.