• Journal of Korea Ship Safrty Technology Authority
• /
• s.33
• /
• pp.12-31
• /
• 2012

수치 계산으로 고속 활주선의 저항 성능을 평가하기 위해서는 활주 상태에서의 항주자세 예측이 무엇보다도 중요하다고 할 수 있다. 항주자세의 변화가 큰 고속 활주선의 경우에는 활주 자세에 따라 선저 바닥면에서 나타나는 압력 변화에 의한 동적 부양력 변화가 크므로 단순히 정지 중 흘수를 기준으로 계산되어진 유체력으로 항주자세를 예측하기 보다는 자세 변화에 따른 동적 부양력의 변화와 이에 의한 자세 변화를 반복 계산을 통해 수렴시키는 것이 요구되어진다. 본 연구에서는 선형화된 자유수면 조건의 포텐셜 수치 계산으로 유체 동압력인 부양력을 계산해내고 이를 유체 정역학적 힘으로 간주하여 부력과 선체중량과의 힘과 트림 모멘트 평형 관계를 만족시키는 방법으로 반복적인 계산을 통해 수렴된 활주 자세를 얻어내었다.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.39-43
• /
• 2017

The purpose of this study was to investigate of effect of medial & inferior gliding of patella using non-elastic taping on muscle activation of vastus medialis & vastus lateralis during sit to st&ing. As a result of measure, it was confirmed that the muscle activity of vastus medialis is higher than total muscle activity when the inferomedial gilding compared to the medial gliding. The medial & downward gliding of patella more stable than medial direction. especially it will be effective on prevent or control of Patellofemoral pain syndrome. In this regard, the development of orthosis & sportswear for inferomedial gliding to patella will be efficiency to maintain healthy the knee joint.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.234-235
• /
• 2017

In order to improve the frictional resistance of existing high-speed planning hull, a step-like linear transformation has been researched which forms an air layer on the bottom. However, there is a lack of research on the proper position to confirm the effect of Running Attitude and step on each position. In this study, we confirmed the change of the Running Attitude, the effect of the step and the change of the frictional resistance when the step was applied in the longitudinal location.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.566-573
• /
• 2017

The chine of high speed vessels does not only play a role in changing position when planing but also helps balancing the hull. It also has a great influence on resistance performance. However, designing a chine requires a lot of experience because it is influenced by various factors such as displacement, transom shape, draft and width. Such a design is not based on an empirical formula, but the purpose of this study is to provide basic guidelines regarding the shape of chine through calculation. This design was developed using Yacht-one, a commercial design program, and analysis was performed using Star-CCM+, also a commercial analysis program. Analysis of the hull selected in this study was carried out by Dynamic Fluid Body Interaction (DFBI) method. Analysis of the chine was carried out at chine angles of 15, 16, 17, and 19degrees, at a speed of 30knots. The result indicated that the highest trim occurred at 16 degrees among the four chine angles considered, and the highest heave occurred at 15degree. In terms of resistance performance, minimum resistance was observed at 16 degrees. Consequently, for minimum ship resistance, it is necessary to complete calculations in accordance with the chine angles, ${\pm}2$ degrees from the initial chine angle, which should be carried out a the design stage.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.123-123
• /
• 2017

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.216-217
• /
• 2018

소형 활주선의 경우, 대형 저속선 대비 항주자세의 변화가 크기 때문에 CFD 해석시 저항성능과 운동성능 결과에 오차가 발생할 수 있다. 본 연구에서는 Warped 2 선형을 대상으로 상용 CFD 코드인 STAR-CCM+ v9.04를 사용한 CFD해석을 수행하여, 이를 모형시험 결과와 비교하여 오차를 확인하였고, 또한 오차의 원인을 분석했을 때, 선체 하부의 Numerical ventilation 현상과 Spray 영역에 문제가 있다고 판단하였다. 추후 연구에서는 오차 해결 방법으로 VOF Phase replacement 기법과 Spray 영역에 대한 격자 최적화 방법을 연구하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.2
• /
• pp.95-103
• /
• 2013

Prediction of the running posture is important to evaluate the resistance by the numerical calculation for a high speed vessel. Especially for a planing craft having a large variation of running attitude it becomes more essential, but it can not be obtained easily because the running posture and the hydrodynamic forces including the resistance are interacted with each other. So iterative calculation to obtain the dynamic forces according to the changes in attitude is necessary, in this study, considering the calculated hydrodynamic force at the assumed draft as the additional buoyancy the corrected draft is calculated through satisfying the equilibrium between the buoyancy and the hull weight. To verify the derived method three kinds of hull forms were used with the results of model tests, R/V ATHENA and 150 tons class guide vessel for middle-speed semi-planing crafts, 28 feet fast boat for a high-speed planing boat. For all cases with several iterations the converged value of draft can be obtained, lastly the resistance and flow around hull were simulated by using VOF method.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.335-342
• /
• 2009

Motion characteristics of a planing craft are sensitively changed according to its weight and longitudinal center of gravity. In this paper, planing craft model tests were performed in calm water for various test conditions and Froude numbers. Sinkage and trim were measured to analyze the relations between the attitudes of a planing craft and the weight and center of gravity of it. Theoretical formula for the prediction of the attitudes of a prismatic planing hull was modified so that it can be applied to the prediction of the attitudes of a non-prismatic planing hull, and the calculation results by the modified formula were in good agreements with the experimental data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.220-221
• /
• 2018

배스보트는 주로 민물에서 낚시를 위해 설계되는 소형 고속 활주형 선박으로 국내에서도 수요가 높은 편이다. 하지만 경기에 참가하는 선수들이 선호하는 17ft급 이상의 배스보트에 대해서는 수입에 100% 의존하는 중이다. 본 연구에서는 18.5ft급 배스보트의 주요요목 결정 및 선형을 개발하고, 선저경사각을 결정하기 위해 상용 CFD코드인 STAR-CCM+ v10.04를 사용하여 수치해석을 수행하여 각 선저경사각별 항주자세 및 저항성능을 분석하여 최적의 선저경사각을 갖는 선형을 도출하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.23-33
• /
• 2019

Unmanned Surface Vehicle (USV) is being developed to do maritime survey and maritime surveillance at Korea Research Institute of Ships & Ocean engineering (KRISO). The goal is that USV should be operated at the maximum speed of 45 knots and it should be operated at sea state 4. Therefore the planing hull of USV should be excellent in resistance performance and manoeuvring performance. It is needed to check its performance using Experimental Fluid Dynamics (EFD), Computational Fluid Dynamics (CFD) or analytic method before designing the hull. In this study, resistance performance was analyzed by EFD and CFD. EFD with heave and pitch was performed at high speed towing system in Seoul National University. CFD was performed using SNUFOAM based on openFOAM with dynamic mesh to calculate running attitudes. The results of CFD were compared with EFD results. The results of CFD were resistance, running attitudes and wave height. The flow distribution and pressure distribution were also analyzed. The results of numerical resistance was under estimated than EFD. Even though the results of CFD have a slight limitation, it can be successfully used to estimate the resistance performance of planing hull. In addition it can be used as a supplement for EFD results.