• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.543-553
• /
• 2021

As a key policy for achieving the goal of reducing GHG in the building sector, Korea has enforced the mandatory certification of zero-energy buildings for new buildings in the public sector from 2020. This study evaluated a policy to achieve Net Zero by identifying the trend of changes in building energy performance according to policy and presenting a methodology to analyze the current performance state of energy technology applied to buildings. The final goal was to help stakeholders apply appropriate energy technologies for new buildings. For this study, data collected on building energy efficiency certification over the last four years have shown a gradual increase in energy performance. In addition, K-means cluster analysis was used to analyze the performance status of energy technologies applied to buildings. The high and low clusters of education and office facilities were used to analyze the comparative group (2016-2020, 2020). As a result, the solar module area in both high and low clusters of education facilities increased by 261.1% and 283.5%. In contrast, the solar module area decreased by both high and low clusters of office facilities. The most passive and active technologies showed an increase in energy performance.

• The Korean Society of Law and Medicine
• /
• v.21 no.3
• /
• pp.117-144
• /
• 2020

In accordance with Article 15 of the Medical Law, medical personnel in Korea cannot refuse treatment of a patient unless there is a justifiable reason, and violation of this obligations is subject to criminal penalties. Japan also stipulates the same content in the law. However, this violation of obligations in Japan is not subject to criminal penalties, and is used as a judgment element of the liability for damages of doctors only in the case of damage to the patient. However, in both countries, it is difficult to interpret and apply the law because the regulation is a little ambiguous. In particular, the key is to find out what is the justifiable reason for the doctor to refuse treatment of the patient. Recently, Japan has completed the work of re-examining the discussion on medical refusal from a modern perspective in terms of improving the excessive working environment of doctors. On the other hand, in Korea, it is not clear in what cases it is possible to refuse treatment. because there is a lack of systematic discussion on medical refusal. Rather, unnecessary misunderstandings and controversies have resulted in the loss of trust between patients and doctors. In Korea, there is already a legal right for a doctor to reject it according to his religious beliefs or conscience in the implementation of the suspension of life-sustaining treatment decisions. And in the case of an abortion, debates are underway that doctors should be given the right to refuse it. This study introduces the current state of discussion in Japan, and examines the issues surrounding medical refusal in Korea. It is hoped that this study will facilitate further discussions on the medical refusal.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.333-345
• /
• 2021

Amid the rapidly changing logistics environment and demand changes in the post-corona-19 era, the importance of the cold chain logistics sector is being highlighted. The scope of cold chain is not limited to food, but is expanding to various fields such as pharmaceuticals, semiconductors, and flowers. The demand on the storage and transportation of corona vaccines is rapidly increasing. The rapid increase in domestic low-temperature facility construction and renovation may lead to the saturation of the cold chain related industry in the future and slow growth. In preparation for this, it is necessary to accumulate infrastructure know-how using IT technologies, and to consider entering into the UN procurement market as a potential niche market, by taking advantage of Korea's recent global status. The demand for cold chain in the UN procurement market is increasing mainly in underdeveloped countries, and it is expected to continue to grow. In this paper, the capabilities of domestic cold chain related companies were analyzed, domestic and overseas cold chain logistics market trends and overseas market entry status were investigated. An in-depth survey was conducted to present strategies for domestic cold chain logistics related companies to enter the UN procurement market.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.2
• /
• pp.39-51
• /
• 2022

Objective : This study aimed to investigate the awareness and experience of community-based dysphagia therapy and related education in community-dwelling older adults. Methods : A total of 89 older adults were recruited from a public health center in Gyeonggi-do. Awareness, experience, and related education regarding community-based dysphagia therapy were analyzed using descriptive statistics. Results : We analyzed 89 questionnaires. Awareness, treatment experience, and education regarding dysphagia were low; however, the importance and intention to participate were high. Respondents wanted education about proper chewing and safe swallowing, oral health, oral motor exercise, and participation in community-based dysphagia programs in public health centers. The reason for the lack of experience in dysphagia education and therapy is insufficient information and opportunities. The respondents had a good understanding of dysphagia symptoms. Conclusion : Dysphagia therapy maintains swallowing and eating functions as a life-long Activity of Daily Living, and is a very important area in community rehabilitation. Based on the results of this survey, the necessity and importance of community-based dysphagia were identified. It is time to provide correct information and develop a systematic education program for community-based dysphagia therapy. Occupational therapists need to play an active role in improving quality of life by early detection and providing proper intervention.

• Journal of Environmental Impact Assessment
• /
• v.31 no.6
• /
• pp.359-368
• /
• 2022

It is essential to increase the implementation rate in order to increase the effectiveness of mitigation measures that can mitigate the negative impact of development projects. In the case of Environmental Impact Assessment (EIA),research on the implementation evaluation of development projects is insufficient, even though the effectiveness of mitigation measures has been steadily raised. Therefore, this study evaluated the implementation rate of the mitigation measures and identified the cause of the difference in the implementation rate for each mitigation measures in order to understand the current status of the ecological mitigation measures. The implementation rate of urban and road development projects mitigation measures was 56.0% and 64.4%, respectively. the implementation rate of 'Monitoring' mitigation measures was the highest in all development project. But, 'Habitat creation' and 'Accident prevention measures' were low. In addition, it was found that the implementation rate of the mitigation measures were high when the contents of the mitigation measure described in the report were specific. Through this study, it was found that in order to increase the implementation rate of the EIA ecological environment animal mitigation measures, it is necessary to reflect the environmental and geographical characteristics of the target site in detail. Furthermore, it is judged that this study can be used as a basic basis for enhancing the effectiveness of the EIA system introduced to mitigate the negative impact on the environment.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.464-477
• /
• 2022

DFN (discrete fracture network) models that take account of spatial variability and correlation between rock fractures have been demanded for analysis of fractured rock mass behavior for wide areas with high reliability, such as that of underground nuclear waste repositories. In this regard, this report describes the spatial distribution characteristics of fracture networks, and the DFN modeling methodologies that aim to represent such characteristics. DFN modeling methods have been proposed to represent the spatial variability of rock fractures by defining fracture domains (Darcel et al., 2013) and the spatial correlation among fractures by genetic modeling techniques that imitate fracture growth processes (Davy et al., 2013, Libby et al., 2019, Lavoine et al., 2020).These methods, however, require further research for their application to field surveys and for modeling in-situ rock fracture networks.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.6
• /
• pp.87-99
• /
• 2022

The meat consumption per person has continuously increased in recent years. However, the labor force in the domestic livestock industry has decreased due to the declining and ageing population. In order to increase productivity, the government have developed and distributed design standard of livestock houses. Presently, report showed that the adaptation rate of the developed livestock house design standard on the real farm was still low. Thus, this paper aimed to find ways to improve the utilization of the design standard through surveys. The survey was conducted on 650 farms across the country. Analysis of the result showed that in the poultry house, the unawareness of farmers to the design standard was found to be the biggest reason for not using the design standards. On the other hand, in the swine house, the previously built swine houses do not fit with the design standard. From these result, the following recommendations were suggested: 1) promotion and education are needed to enhance usage of design standard; 2) since it is impossible to make a design standard considering all the farm sites, it is important to consider the conditions of various farm site prior to enhancement of the design standard; 3) improvement factors such as reinforcing the ventilation design, reflecting animal welfare, preventing livestock diseases, and enhancing ICT devices can also be promoted.

• Clean Technology
• /
• v.28 no.4
• /
• pp.301-308
• /
• 2022

Since nanoporous silica aerogel was first synthesized in 1931, its potential as an ultra-lightweight superinsulation material has been steadily attracting attention. Silica aerogel is the best thermal insulation material to date. However, the potential applications of this lightweight material have so far been hindered by its inherent fragibility and brittleness arising from its ultra-porous nature. Although the monolithic form of silica aerogel has the best ultra-lightweight superinsulation properties, it cannot be used in this form. Instead it is used in the form of powders, particles, and blankets. However, these forms still have shortcomings. Silica aerogel is most widely applied in the form of a fiber-reinforced aerogel blanket, but this form is likely to generate dust when handled. Although silica aerogel particles have been proven to be non-toxic to humans, dust formation remains a major barrier to the widespread application of silica aerogel blankets. This paper will investigate the unique properties of silica aerogel and determine what fields it can be used in or potentially be used in due to its unique properties. In addition, we will review the important advances in silica aerogel synthesis technology and its commercialization so far, and then consider the problems that exist for its widespread commercialization in the future and how to overcome them.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.22-44
• /
• 2022

Lacquer, in addition to high-end crafts such as lacquerware inlaid with mother-of-pearl, was an important strategic material used in a wide range of fields such as industry, architecture, and munitions during the Japanese colonial era. In particular, as the demand for lacquer used in munitions soared in the 1940s when the war started, a ticket system was introduced to restrict its distribution. Meanwhile, Japan experienced a chronic shortage of lacquer as a result of the rapidly increasing demand for it, and thus went on to import Chinese lacquer after the late 19th century. After the 1910s, the market share of Chinese lacquer reached 90%, and the local situation in China began to affect the supply and demand for lacquer in Japan. To counteract the issue, the Japanese government increased the production of lacquer in Joseon. As for the project to increase lacquer production in Joseon, objective indicators were prepared through a number of tests in the 1910s and 20s, which paved the way for the project to begin in earnest in the 1930s. Lacquer trees were planted and training classes on how to collect lacquer were held throughout the country. The Japanese government promoted the lacquer production industry as a promising side job for Koreans. The project, implemented in various parts of the country, reaped fruitful results, and it provided the basis for lacquer production in Korea that has continued to this day. At that time, the major regions in the southern part of the country where the project was concentrated were Wonju, Okcheon, and Hamyang, regions that are still known today as major production sites. The improved method of collecting lacquer taught to Koreans by the Japanese has now become the main method of collecting lacquer in Korea. This study attempts to identify the current status of the project to increase lacquer production through various records from the Japanese colonial era with a view to contributing to the study of modern lacquer craft history.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.65-76
• /
• 2022

The New Excellent Technology (NET) designation system, introduced in 1989 for the purpose of promoting the development of domestic construction technology and enhancing national competitiveness, reviews the statement of construction cost of new technologies. And the cost reduction effect such as design, construction, and maintenance cost and the effect of reducing the construction duration are evaluated as an evaluation criteria of economic feasibility. However, in this evaluation process, differences of opinion between the institution of construction cost estimating standard management and the new technology developer about unique technologies frequently occur. In addition it is difficult to objectively compare the construction duration with existing similar technologies because there is no information on productivity as the current cost estimating standards for new technologies only present the required amount per unit quantity. In this study, the current state of cost estimating criteria review procedure, evaluation criteria, and cost estimating standards establishment method were analyzed when screening for the designation of a new construction technologies, and compared with overseas cost estimating standards, measures to improve the cost estimating standards of current construction new technologies were suggested. Through the improved cost estimating standards of this study, it is expected that cost information on new technologies will be provided to clients in more detail than the current ones, and the availability and applicability of new construction technologies would be improved by simplifying the construction cost calculation process more.