• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.203-212
• /
• 2005

Anthropogenic emissions of greenhouse gases, particularly carbon dioxide($CO_2$) which arises mainly as wastes from the fossil fuel burning processes, are causing global warming. The effects of global warming become increasingly felt all over the world including sea level rise and extreme weather. The more direct consequences of the elevated atmospheric $CO_2$ on the ocean is the acidification of the surface ocean which brings a far reaching adverse impact on the life at sea and probably on the whole ecosystem of the planet. Improvement in energy efficiency and use of alternative energy sources are being made to reduce $CO_2$ emissions. However, a rapid transition to alternatives seems unachievable within a few decades due to the constraints on the associated technology and socio-economic factors in the world, since fossil fuels make up approximately 85% of the world's commercial energy demands. It has now been recognized that capture and geological sequestration of $CO_2$ could significantly reduce its emissions from fossil fuel utilization and therefore provides the means to rapidly achieve large reductions in $CO_2$ emissions(excerpts from London Convention, LC/SG 28, 2005). In Korea, well-developed sedimentary basins are spread over the vast continental shelf and slope regions, whereas, the land is densely populated and limited in area. Consequently, the offshore area is preferred to the land for the sites for geological sequestration. The utilization of the offshore area, however, may be subject to international agreements including London Convention. In this paper, the recent trends in technologies and regulations for $CO_2$ capture and geological sequestration are described to encourage its applications in Korea.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.136-145
• /
• 1988

To investigate the seasonal changes of various organic and inorganic compounds in compost, carbon compounds in compost were analyzed at various composting periods. Contents of organic matter, cellulose, total carbon, organic carbon and biodegradable carbon in compost were decreased with the progress of composting. In contrast, contents of lignin and nonbiodegradable carbon were increased a little with the progress of composting, but effective contents of lignin were decreased with the lapse of composting time, while effective contents of nonbiodegradable carbon were not changed. Total carbon contents in organic matter in compost were decreased within 9 weeks after composting, and then increased thereafter. Difference between average values of total and biodegradable carbon contents was 6.2%. Actual decay rates of all the carbon compounds were higher than decay rates of the compounds at all the experimental periods. Both of actual decay rate and decay rate of all the carbon compounds were increased rapidly within 2 weeks after composting, and thereafter the rates were increased slightly with the lapse of composting time. Especially the decay rates of cellulose were increased from 9 to 21 weeks after composting. Actual degradation capacity showed the same tendency to degradation capacity of all the carbon compounds in compost. Decay rate and degradation capacity of lignin in compost had minus values, while actual decay rate and actual degradation capacity had plus values. Highly positive correlations were observed among organic matter, cellulose, total carbon and biodegradable carbon one another. Nonbiodegradable carbon showed highly negative correlation with organic matter, cellulose, total carbon, organic carbon and biodegradable carbon, respectively. The same tendencies were observed between lignin and organic matter, cellulose, total carbon, organic carbon and biodegradable carbon. Highly positive correlation was observed between lignin and nonbiodegradable carbon in compost.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.120-125
• /
• 1999

This study was carried out to enhance the efficiency of bioleaching of heavy metals. copper and zinc from the soil samples obtained from mine tailings in Cho-il Mine located in Dan-Yang, Choong-Buk. The effects of medium (9 K) composition on the leaching efficiency were investigated by changing concentrations of the dominant components. phosphorus, nitrogen source. and energy source which are the most important factors governing the growth and multiplication of microorganism. The results of the bioleaching test at different phosphorus concentrations of medium, 0 mM. 3.0 mM, and 6.0 mM showed that leaching efficiency for zinc and copper was 98.8% and 47.5% respectively at 0 mM and decreased at higher phosphorus concentration 6.0 mM. In the bioleaching test of zinc and copper at 0 mM, 45 mM, and 90 mM nitrogen concentrations, the Highest efficiency of 85% and 46.4% was obtained for zinc and cooper respectively at 45 mM and the lower efficiency observed for 90mM nitrogen addition. The zinc and copper leaching with variation of energy source dosage showed the highest removal efficiency, 93% for zinc in the absence of energy source and 46.4% for copper at 160mM energy source.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.53-58
• /
• 2013

The design for horizontal drain layer on soft ground starts from the decision that the material could be used or not, by verifying material condition in permeability of horizontal drain material according to the weight percent of the dry soil retained on #200 sieve. In the next step of the design, we estimate the thickness of horizontal drain layer to confirm trafficability of heavy machinery in construction work. Successively, the long-term functionality for good drainage of horizontal drain layer is checked and if needed, some means are considered. In this study, the system to recycle mixed coal ash in ash pond successfully as a horizontal drain material on soft ground is presented through the process and the result of its practical construction work. Namely, the pact is confirmed that mixed coal ash in ash pond should be sorted out by sieve screen to a certain extent and the remainders of this mixed coal ash on sieve openings be recycled, because the amount of finer particles than $75{\mu}m$ contained in mixed coal ash in ash pond is quite massive and irregular depending on the coal power plant or the location in same ash pond. In order to sort at large scale in situ, the dimension of a sieve squre hole and the sort-out method, etc. should be decided before the sort-out process. And, it is described that we need to manufacture classifier to sort out mixed coal ash in ash pond, too.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.117-120
• /
• 2008

As we can see at the oil spill occident on the coast of Taean, the viscosity of the spilled oil becomes thicker as time goes by. It becomes waste oil with the form of tar. It moves to other areas following a tide. When the temperature of the water goes up, the viscosity becomes lighter and forms oil film. It repeats the process spreading to and polluting extensive areas where the tide reaches. People have used hand nets to collect waste oil of tar at the sea. But it is very difficult for them to collect the tar type waste oil spread on large areas before it reaches to the beach. This paper tried to find a way to collect the tar type waste oil efficiently. It used absorption mat of boom type that uses the attachment characteristics of the tar type waste oil and floating waste recovery device of net type. It tested the possibility of using the devices at the oil spill accident on the beach of Taean. The result showed that net type recovery device was much more efficient in collecting the waste oil in short time than the hand net system of people. It confirmed that the net type recovery device could be used to collect tar type waste oil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.451-457
• /
• 2019

In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.1
• /
• pp.18-29
• /
• 2019

ROV surveys were conducted using 500 meter mini class ROV with HD video camera, 2 LED lights, a simple manipulator and 8 thrusters near the Dokdo and Simheungtaek seamount. Total six dives have been conducted using the ROV "V8 SII" from Sweden and ROV's support ship, "KOSAL V" at 4 stations between 45 and 370 meters with diving time ranged from 30 to 120 minutes. Dense communities of sea anemone (Actinostolidae sp.) and ophiuroids (Ophiuridae sp.) on the surface of rocky bottom and snow crab on the soft bottom with muddy-sand were observed at northwestern part of Simheungtaek seamount. We obtained the following results 1) habitats information for snow crab, one of the major fisheries resources, and deep-sea fauna, 2) observation on the specific topography and sediment conditions, 3) observation of the seabed surface covered with the discarded fishing gears. This study represents the first report of in situ visual observation of deep-sea organisms and their habitats near the Dokdo slopes and flat top of the Simheungtaek seamount in the East Sea. These results indicated that immediate oceanographic survey using the mini class ROV is available in the East Sea.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.1-17
• /
• 2021

It is important to evaluate the fracture network in a rock volume because fractures control the ground conditions and fluid flow characteristics. Therefore, various attempts have been made to quantify fracture networks to better understand ground and flow conditions. The use of fracture density alone (a quantitative parameter based on geometric analysis) does not fully explain the evolution of fracture networks, or quantify the spatial relationship (e.g. connectivity) of fractures in a rock mass. Therefore, the need for fracture network characterization based on topological analysis has recently emerged. In Korea however, the topological analysis of fracture networks within a rock mass has rarely been studied. As such, the definition of the topological analysis of fracture networks and the graph theory related to the topological analysis are briefly summarized in this study. We also introduce an application method for these analyses to fracture characterization. If the topological method is used for the analysis of fracture networks, it can also be adopted to analyze fluid flow characteristics of groundwater, characterize petroleum reservoirs, and analyze the evolution of a fracture network. In addition, topological analysis can be useful for site selection of major facilities such as nuclear waste disposal sites because it can be used to evaluate the stability of the potential sites.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2020

The landfill gas produced in landfill is generally made up of methane(CH4) and carbon dioxide(CO2) of more than 90%, with the remainder made up of hydrogen sulfide(H2S). However, separate pre-treatment facilities are essential as hydrogen sulfide contained in landfill gas is combined with oxygen during the combustion process to generate sulfur oxides and acid rain combined with moisture in the atmosphere. Various desulfurization technologies have been used in Korea to desulfurize landfill gas. Although general desulfurization processes apply various physical and chemical methods, such as treatment of sediment generation according to the CaCO3 generation reaction and treatment through adsorbent, there is a problem of secondary wastes such as wastewater. As a way to solve this problem, a biological treatment process is used to generate and treat it with sludge-type sulfide (S°) using a biological treatment process.In this study, as a basic study of technology for utilizing the biological treatment by-products of hydrogen sulfide in landfill gas, an experiment was conducted to use the by-product as a mixture of concrete. According to the analysis of the mixture concrete strength of sulfur products, the mixture of sulfur by-products affects the strength of concrete and shows the highest strength value when mixing 10%.