• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1300-1305
• /
• 2011

Environmental Impact is getting more attention in many feasibility studies for railroad-related projects and research items. For sustainable growth and green transportation, the benefits typically used for feasibility studies in railway-related projects, are composed mostly of economic criterions which is not considering growing attention on changing paradigm. Based on the analysis of current methodologies, improvements in estimating environmental impact especially on noise and pollution are suggested.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.179-184
• /
• 2012

Environmental impact is getting more attention in many feasibility studies for railroad-related projects and research items. For sustainable growth and green transportation, the benefits typically used for feasibility studies in railway-related projects, are composed mostly of economic criterions which is not considering growing attention on changing paradigm. Based on the analysis of current methodologies, improvements in estimating environmental impact especially on noise and pollution are suggested. Active steering bogie has been proposed to satisfy stabilizing and steering performance of railroad. This paper describes the feasibility study of the active steering bogie for a urban railway vehicle based on environment-related criteria.

• Journal of Environmental Policy
• /
• v.10 no.2
• /
• pp.61-92
• /
• 2011

We analyzed the efficiency of environment investments by taking examples of central government's environmental investment (CGEI hereafter) and investment in prevention of environmental pollution (IPEP hereafter). We expanded the scope of existing studies by decomposing the internal rate of return (IRR hereafter) and present value of benefit (Bpv hereafter) into variable cost (VC hereafter) reduction, investment cost reduction (STC-VC hereafter), and rent. And we found that Bpv checks only the magnitude of benefit, while IRR indicates the existence of efficiency by investigating short-run total cost (STC hereafter) reduction and rent. Finally, by analyzing investment efficiency and changing benefit with respect to CGEI and IPEP through the investment efficiency methodology that compares IRR with market interest rate, we executed retrospective benefit-cost analysis. Accordingly, CGEI and IPEP are not efficient. However, IPEP is even more inefficient than CGEI.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.17-34
• /
• 2017

This study aims to analyze the freight transport demand and benefit for the introduction of an automated freight transport system focusing on the Global Industry and Logistics City (GILC) in Busan. In pursuit of this aim, four alternatives were calculated - using the freight volume estimating methods and included, the number of businesses, the number of employees set up, future estimated cargo volume, and switched volume from other transport modes into the GILC. Economic benefits were analyzed against social benefits and costs accordingly. The result of the freight transport demand forecast found, the cargo volume of "Alternative 2-1" to be the most advantageous, applying the number of employee unit method and proportion of employees in Gangseo-gu, Busan. In addition to the conventional analysis of direct benefit items (reduction of transport time, traffic accidents and environmental costs), this study also considered additional benefit items (congestion costs savings, and road maintenance costs in terms of opportunity cost). It also considered advanced value for money research in guidance on rail appraisal of U.K, Federal Transport Infrastructure Plan 2003 of Germany, and RailDec of the United States. The study aims to further contribute to estimating minimum cargo transport demands and assess the economic feasibility of the introduction of new intermodal automated freight transport systems in the future.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.370-375
• /
• 2012

국가개발연구원(KDI)에서는 새만금에 40MW 용량의 국산 풍력발전단지 조성을 위한 예비타당성 조사를 실시하였다. 본 사업에 대한 KDI의 비용편익 분석 결과 순 현재가치가 0보다 작고, B/C 비율은 0.73으로 경제적 타당성이 나타나지 않았다. 하지만 모든 비용과 편익을 화폐가치로 환산해 내는 비용편익분석은 여러 가지 외부효과로 인해 사업의 타당성 연구자들에 의해 주관적인 결과물이 나오기도 한다. 이에 따라 본 논문에서는 새만금 풍력발전 시범단지의 경제성 평가 재검토 연구를 실시하였다. 본 논문에서는 기존 경제성 평가 항목에 대하여 여러 가지 쟁점을 제시하고, 그 중에서 대기오염물질 저감 비용과 학습효과(learning effect)로 인한 비용 절감 편익을 추가적으로 산정하였다. 여기서 학습효과의 학습속도(learning rate) 를 세 가지 시나리오로 나누어 분석하였다. 두 가지의 추가 편익을 KDI의 기존 예비타당성 조사 분석에 추가한 순 현재가치는 상당한 양의 값이 나왔고, B/C 비율은 8.8 로 편익이 비용에 비해 크게 증가했다. 이러한 항목들의 포함 여부에 따라 타당성 결과가 현저하게 달라짐을 알 수 있다. 향 후 비용편익 분석이 정책 결정에 적절히 반영되기 위해서는 외부효과를 고려한 환경 비용, 그리고 학습효과와 같은 추가적인 사항들이 면밀히 검토되어야 한다. 시장에 기반하지 않은 이러한 외부효과로 인한 항목들은 대상과 시기에 따라 매우 다른 결과를 보여주기에 이에 대한 세부적인 연구가 필요한 시점이다.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.37-43
• /
• 2019

Due to environment problems in end of Life Vehicle in the country, the interest in remanufacturing is heightened than ever. In this study, it is important to quantitatively evaluate the economic effect of the introduction of the automotive remanufacturing business and analyzed cost-benefit for the three species of bumpers, doors, fenders, which is relatively lower remanufactured automotive component. The results showed that cost-beneift of each parts were analyzed 54,000 per one part, and if remanufacturing were 50%, benefits were to occur with a profit of 226,060 won. Thus, remanufacturing of bumpers, doors, fender resulted a significant benefit, and then it is possible that remanufacturing company have enough economic value for remanufacturing.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.223-230
• /
• 2011

According to EMEP/EEA Emission Inventory Guidebook, the emissions produced by vehicle in cold start phase should be calculated differently compared to hot start phase. In this study, considering this driving cycle, more appropriate procedures for estimating Environmental Benefits was suggested. Using Tier 3 standard, all links within the impact area were included in estimating emissions. Traffic volume and travel distance were analyzed using EMME/3 software. For application of the procedures in this study, the case study was carried out with real transportation project. As a result, the Environment-Benefits increased by 30%. If the methodology suggested in this study is applied to feasibility study it will help to activate the investment of the environment-friendly modes like railway in the future.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.335-336
• /
• 2008

최근 ITS(Intelligent Transportation Systems)의 보급으로 개인의 기-종점 간 통행시간에 많은 비용절감을 가져왔다. 지금까지의 주요 최단경로알고리즘은 네트워크의 기-종점(Origin-Destination) 거리 간 최단 통행시간을 고려하여 연구되어 왔다. 하지만, 최근 대두되는 고유가 시대의 진입과 더불어 환경에 대한 인식이 높아짐에 따라 기-종점 간 통행시간만을 고려하던 기존의 방법들에서 벗어나 추가적인 요인들의 고려 필요성이 증대되고 있다. 따라서 본 연구에서는 지리정보시스템을 이용한 환경오염을 최소화하는 친환경 최단경로 탐색방법 개발을 제안하고자 한다. 이를 위하여 3D 좌표정보 도로를 활용하여, 도로구배 조건에 따른 배출가스의 증감율을 환경오염편익으로 구분하고, 이를 사회적비용으로 환산하여, 경로탐색의 추가적인 요소로 반영하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.513-522
• /
• 2010

Underground construction for traffic networks, complexes, and storage facilities has risen as an effective land use plan for dealing with emerging problems such as overcrowded urban cities and traffic jams. This paper performed an economic feasibility analysis of the development of the integrated field management system which provides field workers and managers with 3D-based location tracking and clear communication during underground construction works. To conduct the analysis, processes and problems of field management for underground construction were analyzed and deduction in accidents and field management costs and productivity improvement were estimated as expected benefits. Based on computed benefits and costs, an economic analysis was conducted using Benefit/Cost ratio(B/C), Net Present Value(NPV), and Internal Rate of Return(IRR) and then sensitivity analysis was performed to cope with the uncertainty of assumed variables.