• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.218-222
• /
• 2010

본 연구에서는 ${\sigma}$-좌표계를 기반으로 하는 3차원의 이송확산 모형과 depth-integrated eddy simulation 모형을 결합한 효율적인 3차원 근역 (near-field) 해석모형을 제시하였다. 흐름 모형은 Boussinesq-type equations과 stochastic backscatter model을 기본으로 하고 있다. 이 흐름 모형은 수면의 변화와 바닥으로부터 발생하는 전단력과 파랑의 유동으로부터 발행하는 수심방향의 유속분포를 예측할 수 있다. 이와 같은 흐름 정보를 3차원 ${\sigma}$-좌표계의 이송확산모형에 제공하고 scalar의 이송과 확산에 대한 거동을 계산한다. 기본적인 이송과 이송-확산에 대한 검증 및 개수로에서 정량적 검증과 정성적 검증을 수행하였다. 전반적으로 타당한 결과가 도출되어 모형의 적합성이 있음을 확인하였다.

• Journal of Radiation Protection and Research
• /
• v.23 no.2
• /
• pp.103-107
• /
• 1998

The influence of calm conditions on the atmospheric dispersion analyses at KAERI site, which is located at a complex inland basin, was investigated. The U. S. NRC's computer programs XOQDOQ and PAVAN were used to estimate dispersion factors for routine and postulated accidental releases from nuclear facilities, respectively. The joint frequency distribution was obtained from the annual meteorological data measured in 1997 and used as input data of the computer programs. When the definition of calm is changed from 0.5 m $sec^{-1}$ to 0.21 m $sec^{-1}$, the maximum sector dispersion factor becomes 1.62 and 2.16 times higher for routine and postulated accidental releases, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.70-76
• /
• 2001

The present work describes the capabilities of laser beam deflection (LBD) technique for the analysis of the stresses developed during hydrogen diffusion through Pd foil electrode. First, we explain briefly the elasto-diffusive (Gorsky effect) and diffusion-elastic phenomena. A model for the diffusion-elastic phenomenon is theoretically derived from the solution of the Fick's equation for given initial and boundary conditions, Vegard's second law and Hooke's law. Second, we introduce how to apply the principle of LBD technique to the study on the stresses generated during hydrogen diffusion. From the comparison of the deflection transients numerically calculated with those experimentally measured, we finally discuss the change in the tensile deflection with time in terms of hydrogen concentration profile transient and hydrogen diffusivity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.157-163
• /
• 2010

Solid oxide fuel cells (SOFCs) are commonly composed of ceramic compartments, and it is known that the physical properties of the ceramic materials can be changed according to the operating temperature. Thus, the physical properties of the ceramic materials have to be properly predicted to develop a highly reliable simulation model. In this study, several physical properties that can affect the performance of SOFCs were selected, and simulation models for those physical properties were developed using our own code. The Gibbs free energy for the open circuit voltage, exchange current densities for the activation polarization, and electrical conductivity for the electrolyte were calculated. In addition, the diffusion coefficient-including the binary and Knudsen diffusion mechanisms-was calculated for mass transport analysis at the porous electrode. The physical property and electrochemical reaction models were then simulated simultaneously. The numerical results were compared with the experimental results and previous works studied by Chan et al. for code validation.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.16-23
• /
• 1994

Developed fiber-optic biosensor for the detection of organophosphorus compounds in a contaminated water needs the analysis of an enzyme kinetics and the transport phenomena in the reaction part to analyze the sensor signal and to design the sensor. The enzyme inhibition kinetics was investigated and the reactor model was proposed to design the reaction part in the proposed sensor. Since the acetylcholinesterase was inhibited by the organophosphorus compounds, experiments for enzyme inhibition reaction were performed from 0 to 2 ppm to be detected by the developed sensor, and irreversible enzyme inhibition kinetics was proposed. The reactor parts were divided into the two phases, i.e. bulk phase and immobilized enzyme layer, to analyze the flow and diffusion. Sensor signal was able to be analyzed based on the total reactor model established by linking the enzyme reaction kinetics. Based on the proposed model, the effects of loading enzyme amount and enzyme layer thickness on the magnitude of readout signal were simulated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.475-475
• /
• 2023

직경 5 mm 이하의 미세플라스틱은 인류 활동에 의해 생산되어 하수처리장 처리수, 우수토구, 도로 분진 등 다양한 경로를 통해 하천에 유입되고 있다. 하천에 유입된 미세플라스틱은 하천흐름을 따라 하류로 이동하여 해양환경에까지 이른다. 미세플라스틱은 수체를 따라 이동할 뿐 아니라 수생생물에 의해 섭식되기도 하여 인체 위해성이 우려되는 상황이다. 특히 서울과 경기도의 주요 상수원인 팔당호는 북한강, 남한강, 경안천이 유입되어 형성되기 때문에 미세플라스틱의 유입에 따른 이송-분산 거동 평가가 중요한 영역이다. 본 연구에서는 준3차원 입자추적기법을 이용한 미세플라스틱 거동해석 모형, MPT-Q3D를 개발하였으며 팔당호 내 미세플라스틱의 거동 특성을 분석하였다. MPT-Q3D 모형은 2차원 흐름해석모형과 연계한 입자의 준3차원 거동해석을 위해 step-by-step computation method를 적용하였으며, 전단류에 의한 입자의 수평거동과 난류확산에 및 침강속도에 의한 연직거동 두 단계 계산과정에 따라 입자의 거동을 해석했다. 전단류는 2차원 흐름해석결과로부터 유속의 연직분포식을 적용하여 생성하였으며, 생성된 전단류에 의해 각 연직층 별 유속이 계산되고 𝚫t 이후 입자의 종, 횡 방향 이동거리를 계산한다. 또한 난류확산에 의한 무작위적 거동 계산을 위해 Gaussian 분포를 따른 난수 생성을 통해 무작위적 거동을 계산했다. 각 연직층에 위치한 미세플라스틱 입자의 종, 횡 방향 거동을 계산한 후 입자의 연직거동을 계산한다. 입자의 연직 위치는 난류확산과 침강속도에 따라 계산되며 침강속도는 미세플라스틱의 밀도 및 직경에 따라 결정된다. 현장 샘플링 결과에 따라 팔당호로 유입되는 미세플라스틱은 폴리스틸렌(PS), 폴리에틸렌(PE), 폴리에스테르(Polyester)가 있으므로, 세 종류의 미세플라스틱을 동시에 주입하여 팔당호 내 거동을 분석했다. 남한강, 북한강, 경안천의 유량 차이로 인해 팔당호로 유입되는 미세플라스틱은 대체로 남한강과 북한강의 흐름특성에 영향을 받았다. 경안천의 경우 유량이 낮아 팔당호로 유입되지 못하고 좌안을 따라 하류로 이동됐다. 남한강과 북한강에서 유입된 미세플라스틱은 주로 팔당호 내 소내섬을 거쳐 팔당댐 쪽으로 이동했다. 또한 팔당댐 인근에서는 PP, PE, Polyester 순으로 많은 양이 유입되는 결과가 나타났다.

• 전기의세계
• /
• v.39 no.3
• /
• pp.39-46
• /
• 1990

반도체 내에서의 전자장 해석을 위한 Maxwell방정식의 단순화, 반도체 방정식의 전개, 물리적인 모델링, 수치해석 기법, 응용분야 및 차세대 반도체 기술 개발을 위한 device simulation 기술등을 review하였다. Poisson방정식의 고유한 quasi-static apporximation을 고찰하였으며, Drift 확산식의 유효성 범위를 증가시키기 위하여 각 물리적인 모델들을 review하였다. 반도체 수치해석에서 빈번히 사용해온 F.D.M.F.E.N.및 B.E.M기법의 장단점과 각각으 수치해석 기법을 이용한 Simulation tool들을 언급하였다. 또한 현재의 반도체 기술과 차세대 반도체 memory기술을 위한 Simulation의 응용분야 및 3차원 Simulation에 필요한 기본적인 tool의 조건을 언급하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.129-138
• /
• 1993

In this study, the applicability of finite analytic method (FAM) is studied by selecting linearized-Burgers equation and Burgers equation which have convective and diffusive behaviors as the model equation of Navier-Stokes equations and by comparing numerical solution of finite difference method (FDM) and finite analytic method. The results are as follows. It is shown that the convergence of FAM for steady-state analytic solution of linearized-Burgers equation and Burgers equation is better than that of FDM under the same criteria. Also the accuracy of FAM for transient solution of Burgers equation is excellent. Especially, it is shown that oscillation phenomenon due to dispersion errors which occur according to the choice of grid size in FDM does not occur in FAM at all. So, it can be thought that FAM is numerically very stable scheme, which is free from dispersion errors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.523-528
• /
• 2012

A bendable electronic module is developed for a mobile application by using a low-cost roll-to-roll manufacturing process. In the module, a thin silicon chip is embedded in a polymer-based encapsulating adhesive between flexible copper clad polyimide layers. A set of tests are conducted for the purpose of qualification: thermal shock, high temperature storage, and autoclave tests. During the autoclave test, delamination occurs at many places within the module layers. To investigate the failure mechanism, moisture diffusion analysis is conducted for the interior of the module under the autoclave test condition. For the analysis, the hygroscopic characteristics of the encapsulating materials are experimentally determined. Analysis results indicate the moisture saturation process in the interior of the module under the autoclave test condition.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.371-378
• /
• 2011

Concrete is affected by various deterioration factors, such as $CO_2$ and chloride ions from the sea, which cause carbonation and salt attack on concrete. These deterioration phenomena cause steel corrosion in RC structures. Although a great deal of research has been carried out in this area thus far, it is difficult to know the point at which corrosion will occur to a reinforced bar. As the diffusion of deterioration factors depends on the water content in concrete, it is imperative to assess the condition of absorbed water content. A mass measuring method was applied to calculate the absorbed water diffusion coefficient, as well as non-linear finite element method(FEM) analysis. As a result, it was found that W/C and unit water content in concrete mixture affect the diffusion coefficient decision.