• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.69-74
• /
• 1998

본 논문은 건축실내표면의 확산성이 실내음향에 미치는 영향의 범위와 그 정도를 알기 위하여 가상의 홀을 시뮬레이션하여 확산성의 차이에 따른 실내음향인자의 변화를 분석하였다. RT, EDT, C80 등의 음향인자의 분석을 통하여 실내의 확산성이 초기 음에너지의 증가와 확산에 큰 영향을 미치고 있으며, 특히, 천장보다는 벽체의 확산명이 명료도의 증가와 음이해도의 상승에 기여하는 것으로 나타났다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.368-376
• /
• 2004

The estimation of the diffusion coefficients of the Gaussian plume model and the release rate by assimilation of tracer-gas measurements on Younggwang site was tested. Diffusion coefficients were modified by linear programming of both the measurements and the simulated using the Gaussian plume model. The application of the modified diffusion coefficients improved the prediction ability of the Gaussian plume model on both 3 km and 8 km arc lines. And, the release rate of tracer gas was estimated using least squares method. The optimal source rate was estimated by minimizing the errors between the measured concentrations and the computed ones by the Gaussian plume model. The obtained release rate showed a good agreement with the real release rate of the Younggwang experiment in 24%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.665-670
• /
• 1998

삼차원 해륙풍 모델과 라그랑지안 입자확산모델을 이용하여 해안지역에 위치한 원전으로부터 정상운전시 장기적으로 연속 방출되는 방사성 물질의 대기확산 평가방법론을 개발하였다. 개발된 방법론을 적용하여 월성원전 부지를 대상으로 풍향, 풍속 및 운량에 따라 범주화된 각 종관기상 상태에 대해 가을철 방사성 물질 대기확산 특성을 분석하였다. 분석 결과, 방사성 물질의 계절 또는 연중 핑균적인 대기확산인자의 분포는 종관바람 둥과 같은 주풍의 발생빈도에 영향을 받을 뿐만 아니라, 해륙풍 등과 같은 국지 대기순환의 특성에 따라서도 그 분포특성이 결정됨을 알 수 있었다.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.60-67
• /
• 2013

A diffusion coefficient is an important parameter in the prediction of atmospheric dispersion using a Gaussian plume model, and its modelling approach varies. In this study, dispersion coefficients recommended by the U. S. Nuclear Regulatory Commission's (U. S. NRC's) regulatory guide and the Canadian Nuclear Safety Commission's (CNSC's) regulatory guide, and used in probabilistic accident consequence analysis codes MACCS and MACCS2 have been investigated. Based on the atmospheric dispersion model for a hypothetical accidental release recommended by the U. S. NRC, its influence to atmospheric dispersion factor was discussed. It was found that diffusion coefficients are basically predicted from a Pasquill- Gifford curve, but various curve fitting equations are recommended or used. A lateral dispersion coefficient is corrected with consideration for the additional spread due to plume meandering in all models, however its modelling approach showed a distinctive difference. Moreover, a vertical dispersion coefficient is corrected with consideration for the additional plume spread due to surface roughness in all models, except for the U. S. NRC's recommendation. For a specified surface roughness, the atmospheric dispersion factors showed differences up to approximately 4 times depending on the modelling approach of a dispersion coefficient. For the same model, the atmospheric dispersion factors showed differences by 2 to 3 times depending on surface roughness.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.17-28
• /
• 1997

콘크리트를 통한 핵종의 확산계수는 처분장으로 부터의 핵종 유출을 평가하는데 중요한입력 인자이다. 본 연구에서는 콘크리트에서의 핵종확산 연구 현황 및 핵종화산에 미치는 주요 인자들의 영향 등이 조사되었고, 주요 핵종의 확산계수가 직접 측정되었다. 내부확산법으로 측정된 확산계수값은 시료의 물과 시멘트 비 (W/C)가 증가할수록 증가하였으나 거의 같은 승수내에 있었으며, 공극확산이 핵종이동을 지배하였다. Cs 과 I 의 겉보기 확산계수는 순수 시멘트에서 각각 $1.0{\times}10^{-12}~1.0{\times}10^{-11}m^2/s$ 및 $3.0{\times}10^{-14}~1.0{\times}10^{-13}m^2/s$, 몰타르에서는 각각 $3.0{\times}10^{-12}~9.0{\times}10^{-11}m^2/s$ 및 $3.0{\times}10^{-11}m^2/s$의 범위에 있었다. 이와 병행하여 시멘트, 몰타르 및 콘크리트에서의 주요 방사성핵종의 확산계수 값을 문헌으로부터 수집, 정리하였다. 대상 핵종은 Cs, I, Sr, C, Co, H, Am, PU, Ni, Mn, Fe, Nb 및 Tc로서 수집된 핵종확산계수 값은 시료의 조건 (공극률 밀도, W/C 비, 온도 등) 에 따라 큰 편차를 보여주고 있다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.179-184
• /
• 2003

This study investigated the relationship of fuel weight and depth together with slope on the spread of forest fire. Fire spread was faster on the greater slope in forested land. Fire had a greater spread rate with lighter fuel weight. The thickness of the fuel bed and forest fire spread rate were not related. The fire spread rate was closely related to the slope and weight of the fuel bed (significant at 0.01, 0.05, respectively). The thickness of the fuel bed was not significant (0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.108-115
• /
• 2018

Time is considered as an important factor to understand the diffusion behavior of single generation technology. However, multiple generation technology required additional factors in addition to time to understand the diffusion behavior. This study defined the diffusion path of multiple generation technology based on dimensions of 'time, price, and performance' after extracting price and technical performance factors and traced the diffusion path of semiconductor industry based on defined dimensions. The case study of semiconductor industry indicated that the diffusion path is determined maximizing the integrated area of price and performance. This study has theoretical implications in that it analyzed the diffusion behavior of multiple generation technology based on multiple dimensions and can forecast the diffusion behavior at matured as well as early stage technology. Also, this study has practical implications for R&D and marketing managers to understand time-to-market, exit time, and economical as well as technical requirements.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.481-487
• /
• 2005

In this study, a GIS model to simulate the behavior of surface forest fires was developed on the basis of forest fire growth prediction algorithm. This model consists of three modules for data-handling, simulation and report writing. The data-handling module was designed to interpret such forest fire environment factors as terrain, fuel and weather and provide sets of data required in analyzing fire behavior. The simulation module simulates the fire and determines spread velocity, fire intensity and burnt area over time associated with terrain slope, wind, effective humidity and such fuel condition factors as fuel depth, fuel loading and moisture content for fire extinction. The module is equipped with the functions to infer the fuel condition factors from the information extracted from digital vegetation map sand the fuel moisture from the weather conditions including effective humidity, maximum temperature, precipitation and hourly irradiation. The report writer has the function to provide results of a series of analyses for fire prediction. A performance test of the model with the 2002 Chungyang forest fire showed the predictive accuracy of 61% in spread rate.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.451-454
• /
• 2000

실의 음향성능을 규명하기 위하여 많은 음향인자가 개발되어지고 제시되어 왔다. 음향인자 중 확산은 실의 전반적인 음향성능에 매우 유용한 것으로 여겨져 왔다. 본 연구는 장방형의 형태를 가지고 체적과 마감재료가 같은 2종류의 축척모델을 제작하여 각각의 모델에서 RT, EDT, SPL, C, IACC 등을 측정하여 확산체의 유$\cdot$무에 따른 실의 실내음향 성능을 알아보고자 한다 실험결과 실내 표면의 확산성의 차이에 따라 표면의 확산성이 좋은 공간에서 초기음장에서 음에너지가 집중되고 분산되는 것을 입증하였다. 즉 확산성이 좋은 모델에서 잔향시간(RT)은 더 짧으나 초기감쇠시간(EDT)이 더 길게 나타남으로 인하여 음에너지의 분포가 실의 확산상태에 의하여 음의 발생이후 짧은 시간내에 집중하여 전달되고 있음을 증명하였다. 또한 실의 확산상태가 좋은 공간의 명료도가 확산이 되지 않은 실에 비하여 훨씬 더 좋은 결과를 보이고 있음을 나타냈다. 이상의 결과를 종합하여 볼 때 실내 표면의 확산성이 전반적인 실내 음장의 향상에 크게 기여하고 있음을 밝혀 냈다.

• Journal of Radiation Protection and Research
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1998

A diffusion model of radioactive liquid effluents is developed and applied for YGN NPP's site, based on the Gaussian plume type model. Due to the complexity of oceanic diffusion characteristics of YGN site, a simple and reliable statistical model based on Reg. Guide 1.113 is developed. Also, a computer code package to calculate dilution factors as a function of plant operation conditions and pathway of radioactive materials. A liquid effluents diffusion model is developed by dividing the diffusion range into two categories, i. e, a near field mixing region and a far field mixing region. In the near field, the initial mixing is affected by a buoyance force, a high initial turbulence and momentum which is characterized by a plant operation condition and environmental conditions. The far field mixing is similar to gaseous effluents diffusion. So, beyond the near field region, wellknown Gaussian plume model was adopted. A different area averages of Gaussian plume equation was taken for each radioactive exposure pathway. As a result, we can get different dilution factors for different pathways. Results shows that present dilution factors used for YGN ODCM is too much overestimated compared with dilution factors calculated with the developed model.