• Membrane Journal
• /
• v.14 no.1
• /
• pp.75-84
• /
• 2004

In this study, we present a noble study far membrane transport models using chlorine resistance of polyamide RO membranes. Membrane transport mechanism is investigated by the comparison of membrane permeation performance under the continuous and Intermittent operation modes with mixed feed solution containing NaOCl and NaCl. Analysis of permeation performance indicates that solution-diffusion model and preferential adsorption-capillary flow model are relatively efficient according to operation mode. Under the continuous flow state, mass transfer depends on preferential adsorption-capillary flow model rather than solution-diffusion model. On the other hand, it prefers solution-diffusion model to preferential adsorption-capillary flow model under the stationary state. SEM images of NaOCl treated membrane surfaces strongly support these conclusions. These surface images reveal that NaOCl treated membrane in continuous operation mode exhibits ridge and valley structure in some fraction of the surface area, whereas that in intermittent operation mode shows surface degradation entirely.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.429-429
• /
• 2021

2019년 발생한 인천광역시 붉은 수돗물 사태로 급수구역에 포함된 26만 1천 세대, 63만 5천 명이 직·간접적인 피해를 입은 바 있다. 경제적 피해액으로 추정할 경우 최소 1,280억 원 이상으로 보고된 바 있으며, 이와 같은 상수관망의 수질사고 확산은 장기간 동안 시민의 건강과 생활환경 수준을 저하시킨다. 따라서 상수도시스템의 수질사고확산 모델링 및 방지기술을 통한 수질안전성의 재확인이 필요하며, 이것은 상수도시스템의 지속가능성을 높여 국민이 체감하는 물 환경 수준 제고에 기여가 가능하다. 관망 내 수질해석을 직접적으로 수행하는 모델은 국외적으로 다양하게 개발(PODDS, EPANET-MSX, EPANET2.2 등)된 바 있으나 검·보정을 위한 수질측정 자료 부족 등으로 적용이 제한적이라는 한계가 현재에도 존재한다. 이를 보완하기 위해 수질자료에 비해 그 양이 많고 획득방법이 상대적으로 수월한 수리학적 계측자료 및 해석결과를 활용한 관로 내 체류시간 등을 활용한 연구가 수행된 바 있다. 그러나 이와 같은 수리학적 해석 결과를 활용하는 경우에도 계측자료를 기반으로 한 수리학적 검·보정은 필수적이라 할 수 있다. 본 연구에서는 관로 내 체류시간에 직접적인 영향을 미치는 유량 및 유속자료를 중심으로 수리학적 관망해석의 결과를 최적 검·보정하는 방법론을 제안하였다. 기존 상수관망 수리해석의 검·보정은 일부 지점에서 수압을 측정하고, 수리해석 결과로 도출되는 해당 지점의 수압이 실측된 결과와 유사하도록 관로의 유속계수를 적절히 보정하는 형태로 진행되었다. 그러나 본 연구에서는 관로유량과 유속자료의 목적함수 내 가중치를 수압자료보다 크게 설정하여 체류시간 중심의 검·보정이 수행될 수 있도록 하였으며, 검·보정 대상인자 역시 대수용가의 수요량, 수요패턴, 그리고 관로유속계수로 확장된 모형을 구축하였다. 최적화 기법으로는 메타휴리스틱 기법중 하나인 화음탐색법을 활용하였다. EPANET 2.2 Toolkit과 Visual Basic .Net을 연계하여 프로그래밍하였으며, 개발된 모형을 실제 지방상수도 시스템에 적용하여 분석하였다.

• International Area Studies Review
• /
• v.21 no.1
• /
• pp.97-117
• /
• 2017

This research highlights the process of adopting cloud computing technology from users' perspective. Concentrating on perceived mechanism from employees side that lead to job performance at work. Cloud computing, the new player in our modern business environment, authors employ diffusion of innovation theory to capture how this new technology affect employees in workplace in terms of job performance. Education for this new system and managerial support by firm were used as moderating variable to test dependent variable, job performance. Research was done through survey from total 284 people working in metropolitan area at South Korea. The result shows that cloud computing system affect positively on work efficiency, and the extent of diffusion factors that influence from the most to least are as follow: 1. Users' Skill, 2. System Quality, 3. Information Quality, 4. Group Awareness, 5. Attitude towards New System. To test diffusion factors of cloud computing and job performance, South Korean people actually felt that cloud computing help their job performance and the extent of diffusion factors that influence from the most to least are as follow: 1. Users' Skill, 2. System Quality, 3. Information Quality, 4. Attitude towards New System, 5. Group Awareness. As for diffusion factors of cloud computing and productivity, result proved that cloud computing really helps firms, and the extent of diffusion factors that influence from the most to least are as follow: 1. Information Quality, 2. Attitude towards New System, 3. Group Awareness, 4. System Quality, 5. Users' Skill. Two moderating variables, employee education and managerial support were tested to prove whether these two variables affect the job performance and the result displays positive affect for both two factors. To conclude, adopting cloud computing helps firms by increase employees' work efficiency and job performance. In order to accelerate the process employees education really matters because users' skill is the most crucial among diffusion factors.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.3
• /
• pp.267-293
• /
• 2022

A webzine issued by a public institution not only plays a role in communication between members of the institution and its users, but is itself a meaningful record. In addition, as one of the management techniques of the archives, there is a growing awareness that active marketing is needed to promote the service and allow potential users to visit the archives. Therefore, efforts should be made to increase user satisfaction by identifying user needs, composing content reflecting them, and selecting user-centered interfaces appropriately. The purpose of this study is to design 'On-Gi', a newsletter of the Presidential Archives, as a user-participating smart platform in a smart device environment. As a research method, we first looked at the current status of webzine publication by relevant domestic institutions. Next, we compared and analyzed the issue of 'On-Gi' provided by the Presidential Archives and major contents. Based on this, a design model of the webzine for the marketing of the Presidential Archives was proposed. This can be used as a key marketing strategy for the Presidential Archives in the new user environment of technological innovation of smart devices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.43-51
• /
• 2011

Natural convection heat transfer phenomena on a horizontal cylinder have been studied experimentally in order to investigate the applicability of analogy experimental methodology using a copper electroplating system and to visualize the local heat transfer rates depending on the angular position and the diameter of the horizontal cylinder. In the copper electroplating system, the copper ion produced at the anode moves by convection and diffusion to the cathode and reduces at the cathode, representing the heat transfer. By using aluminum cathode with a distinguishable color, the amount of copper plated could visualize the amount of heat transferred depending on the angular position of the cylinder. The diameter of the cylinder is varied from 0.01m to 0.15m, which correspond to Rayleigh numbers in the range of $1.73{\times}10^7$ to $5.69{\times}10^{11}$. The test results are in good agreement with existing heat transfer correlations.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.299-311
• /
• 2019

Decommissioning is a critical issue in Korea. Although compared with the operation of nuclear power plants the release of radioactive materials during decommissioning is not expected to be significant, residents should always be protected from radiation exposure. To manage this effectively, Annual Release Objectives (ARO) and Annual Release Limits (ARL) were derived from dose standards in the NSSC Notice and dose limit for the public. Based on meteorological data for the three years from 2008 to 2010 in the Shin Kori nuclear power plant site, atmospheric dispersion and ground deposition factors of gaseous effluent were evaluated using the XOQDOQ computer code. The exposure dose was evaluated using the ENDOS-G computer code. Because of differences in radiological sensitivity according to age groups, the results of Annual Release Objectives (ARO) and Annual Release Limits (ARL) showed significant differences depending on the radionuclides. The evaluation methodology of this study will provide meaningful information for radioactive effluent management for decommissioning of nuclear power plants.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.772-779
• /
• 2012

For improving performance of conical air diffuser generating fine bubble, both experimental and numerical simulation method were used. After adapting diffusers inner real scale bubble column, suitable for various diffuser submergence, the effect of diffuser submergence on oxygen transfer performance such as Oxygen Transfer Coefficient ($K_{L}a_{20}$) and Standard Oxygen Transfer Efficiency (SOTE) was investigated empirically. As flow patterns for various diffuser number and submergence were revealed throughout hydrodynamic simulation for 2-phase fluid flow of air-water, the cause of the change for oxygen transfer performance was cleared up. As results of experimental performance, $K_{L}a_{20}$ was increased slightly by 7% and SOTE was increased drastically by 39~72%, 5.6% per meter. As results of numerical analysis, air volume fraction, air and water velocity in bioreactor were increased with analogous flow tendency by increasing diffuser number. As diffuser submergence increased, air volume fraction, air and water velocity were decreased slightly. Because circulative co-flow is determinant factor for bubble diffusion and rising velocity, excessive circulation intensity can result to worsen oxygen transfer by shortening bubble retention time and amount.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.377-386
• /
• 2021

The A60 class deck penetration piece is a fire-resistant system installed on a horizontal compartment to prevent flame spreading and protect lives in fire accidents in ships and offshore plants. This study deals with approximate optimization using discrete variables for the fire resistance design of an A60 class deck penetration piece using different surrogate models and a genetic algorithm. Transient heat transfer analysis was performed to evaluate the fire resistance design of the A60 class deck penetration piece. For the approximate optimization of the piece, the length, diameter, material type, and insulation density were applied to discrete design variables, and temperature, productivity, and cost constraints were considered. The approximate optimum design problem based on the surrogate models was formulated such that the discrete design variables were determined by minimizing the weight of the piece subjected to the constraints. The surrogate models used in the approximate optimization were the response surface model, Kriging model, and radial basis function-based neural network. The approximate optimization results were compared with the actual analysis results in terms of approximate accuracy. The radial basis function-based neural network showed the most accurate optimum design results for the fire resistance design of the A60 class deck penetration piece.

• The Korean Journal of Archival Studies
• /
• no.16
• /
• pp.147-200
• /
• 2007

Archives provide users with easier and more convenient access to and use of archival data through their Internet websites. Now, archival websites function not only as a tool of information provision or marketing, or as a gateway of Internet-based materials, but also as cyber space for all services of archives, providing users with information and knowledge and direct accessibility to the services in the archives. At present, Korean archives are proceeding with establishing websites or upgrading existing websites, and the use rates and reliability of web services by users are becoming higher. However, although there have been various studies for the evaluation of general websites, few are found with regard to the evaluation of archival websites. It is necessary for archival websites that provide information service to users of every stripe to make more efforts and have more interest in user-centered convenience, right to know, and information provision-centered service. Accordingly, needless to say, it is necessary to study evaluation criteria of websites so that high quality archival websites can be established. With this background, this study establishes evaluation criteria for archival websites, which are appropriate to their objectives and functions and directly evaluates archives, presenting ways to establish and redevelop archival websites. More detailed purposes are as follows: First, analyzes existing theories of evaluation through reviews on previous literature and elicits evaluation criteria for websites, which are appropriate to archives; Second, based on the elicited evaluation criteria for archival websites, examines the current state of domestic archival websites through analytic evaluation; and Third, presents ways to improve archival websites that may be helpful in establishing or improving them in the future. The expectancy effects of this study are as follows: First, it will be helpful when one wishes to identify the current state of archival websites and to improve or redevelop existing websites, or to develop online service through website; Second, it will function as a checklist when a developer who is to establish an archival website wishes to develop evaluation criteria; and Third, it may be used as an inspection tool when an archives contracts out the establishment of its website.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.617-626
• /
• 2004

본 연구는 정보통신기술 (ICT)의 발달과 컴퓨터의 대중화 인터넷 보급의 확산 및 상거래의 온라인화 등으로 전자상거래가 확산되고 이와 더불어 급격한 규모로 성장되고 있는 전자지불 시스템을 분석하고자 한다. 과거 전자지불시스템 자체에 대한 기술적인 연구나 전자화폐 등 세부매체에 대한 연구는 상당히 많이 진행되어 왔으나 본 연구에서는 특히 소액 전자지불시스템을 세분하여 비교연구하기 위한 체계를 제시한다. 전자지불시스템을 자체의 특성에 따라 분류한 기존의 연구에 근거하여 사용자들이 각각의 지불매체에 대해 얼마나 다르게 인식하여 어떠한 태도를 가지고 있는지에 대한 연구체계를 제시한다. 특히 최근 이슈가 되고 있는 모바일 지불시스템 등 소액 중심의 결제시스템을 사용자가 선택하는 이유와 방식에 대해 결제매체의 특성을 중심으로 기존의 결제시스템과 비교하여 분석하기 위한 연구모형을 제시하였다. 본 연구에서 제시된 연구모델을 통해 향후 지불서비스 이용자들이 결제시스템을 이용하는 이유에 대해 이론적으로 체계적인 분석을 함으로써 은행 및 결제대행사 등 기존의 지불서비스 제공기관외에 이동통신사나 컨텐츠 제공업체, 포털서비스 업체 등 관련 기업과 전자지불관련 정책을 수립 집행하는 정부기관에 참고할 수 있는 연구 분석 결과 도출될 수 있을 것으로 예상한다.