• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.207-217
• /
• 1993

In this paper, knowing a priori probability of phase offset between transmitted codes and reference codes in the receiver, we construct the state diagram of acquisition process of the direct sequence spread-spectrum communication system using the expanding window search. The scannings are performed from the cell with higher probability code epoch synchronization to that with lower one. We expand window size from initial value by r times of its previous size in each search, construct the corresponding the state diagrams, and derive average synchronization time using the Markov process and Mason's gain formula. Average synchronization times versus number of search n and detection probability $P_d$ are calculated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1407-1411
• /
• 2007

현재까지 우리나라에서 주로 사용되고 있는 2차원 흐름 해석모형은 미연방 도로국(U.S. Federal Highway Administration)과 연계하여 Brigham Young University에서 개발된 SMS(Surface-Water Modeling System) 모형이다. SMS모형 중 이송 확산 모형으로는 RMA-4가 포함되나 이 모형은 최신 수치기법을 반영하지 못하는 등의 문제점들로 인해 실제 물리적 현상 모의에 있어서 한계를 가지고 있다. 따라서 물리적 현상에 대한 적절한 모의를 위한 개선과정을 통하여 RAM4가 개발되었다. 본 연구에서는 현장실측 자료를 바탕으로 RMA-4와의 모의결과 비교를 통하여 오염 확산 해석모형인 RAM4의 적용성을 검증하고자 하였다. RAM4와 RMA-4 모의에 있어서 격자구성과 경계조건은 동일하게 설정하였으며, 유량조건은 평수량과 갈수량으로 선정하였다. 각각의 유량시 수위조건이 틀려지므로 각 유량조건에 대한 격자구성을 달리하였다. 모의구간은 낙동강 본류의 수산대교에서 삼랑진 철교까지의 약 13km 구간을 대상으로 하였다. 모의 구간내에는 밀양-하남 하수처리장이 상류 좌안측에 위치하고 있고, 만곡, 단면의 축소 및 확대, 하중도, 합류 등의 지형학적 특징들이 비교적 짧은 구간에 나타나고 있어 모형의 검증에 적합하다고 판단된다.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.64-68
• /
• 2010

In this paper, we studied the novel synchronization algorithm for cooperative communication system over fading. We research mainly on the decode-and-forward scheme. Also, we inserted spreading sequence in origin data frame to control efficiently data synchronization. In mobile station, inserted spreading sequence in data frame passed through the corelation process. We had decide the delay value of received data through result of correlation process. In simulation, We applied that channel gain of three node had different value in various fading environment. Finally we will be possible to control the received data synchronization using result of corelation value in each node between relay to mobile station and base station to mobile station. The results of this paper can be applicable to the cooperative systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.216-221
• /
• 2013

In this paper, wireless channel characteristics of massive MIMO system is analyzed by comparing angular spread, cross polarization discrimination(XPD) and delay spread of dual polarized 4 and 128 transmit array antenna systems, by using 3D rat-tracing simulator, Wireless Insite in microcell environments. The analysis shows that increasing the number of transmit antennas results in the smaller angular spread and delay spread, and the higher value of XPD.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.111-117
• /
• 2019

We categorize the model of simple payment into Magnetic Secure Transmission, Near Filed Communication, and App Card based on the Focus Group Interview. We also define the key drivers for the diffusion of simple payment services based on the literature review with the experts. Through Analytic Hierarchy Process our finding suggests that the degree of acceptance at the stores is the most critical factor which decides the diffusion of simple payment service model. Security is also the important driver but due to the fact that service providers should follow the information security rule and supervisory guidance, it actually did not make a big difference in terms of assessing competence of each model.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.63-66
• /
• 1998

MC-CDMA(Multi-Carrier Code Division Multiple Access) 시스템에서 전송 신호의 피크 전력 대 평균 전력(Peak-to-Average Power: PAP)율을 낮추는 방안을 제시한다. 확산 코드에 의해 결정된 각 부 캐리어의 위상 오프셋은 전송 신호의 복소 포락선 형성에 영향을 주게 되어 전송 신호의 PAP 율을 결정하게 된다. 따라서 각 부 캐리어의 위상 오프셋을 적절히 조정함으로써 PAP율을 낮출수 있다. 본 논문에서는 PAP 율을 감소시키는 부 캐리어 위상 오프셋 코드의 한 예를 제시하며, 모의 실험을 통하여 전송신호의 크기 분포 특성과 PAP 율의 감소를 확인한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.145-152
• /
• 2009

최근 물류 분야는 국가나 기업의 가치창출의 핵심동력으로 인식되고 있다. 하지만 내륙운송의 경우 정보화시스템의 현대화 및 정보연계는 미진한 실정이다. 국가물류의 효율화를 위해서는 물류흐름상의 정보 단절을 방지하는 것이 중요하며, 각 주체별 물류정보 연계/통합의 필요성이 확산되고 있다. 본 연구는 국가물류 효율화를 위해 각 물류 주체별 정보 현황 및 정보 통합의 문제점을 살펴보고, 물류 정보 표준화 방향성을 제시하고자 한다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.8-15
• /
• 2019

When RC(Reinforced Concrete) structures are exposed to harsh environment, deterioration phenomenon occurs, and the corrosion in rebar due to chloride intrusion is known as representative deterioration, so called chloride attack. In this paper, chloride resistance performance of 2 years aged concrete is evaluated considering 3 levels of water to binder ratio(0.37, 0.42, and 0.47) and 2 levels of substitution ratio of fly ash(0% and 30%). Accelerated chloride diffusion coefficient tests referred to Tang's method, total passed charge tests referred to ASTM C 1202, and compressive strength tests referred to KS F 2405 are performed. With adaptation of the previous test results and the results from this study, time-dependent chloride diffusion characteristics are analyzed for each concrete. The FA(Fly Ash) concrete has higher chloride resistance performance than OPC(Ordinary Portland Cement) concrete. According to the evaluation standard of ASTM C 1202, the FA concrete has "Moderate" grade after 49 days while OPC concrete does "Moderate" grade after 365 days. As the results of time-parameter for chloride diffusion, OPC concrete and FA concrete show the decreasing behavior of time-parameters with increasing water to binder ratio. Also, FA concrete has 1.57~2.74 times of time-parameter than OPC concrete. That's cause is thought that the time-parameter indicates the gradient of decreasing of diffusion coefficient. FA concrete has higher time-parameters than OPC concrete by pozzolanic reaction of FA.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.2
• /
• pp.5-12
• /
• 2023

In this study, the amount of heaving soil and the heave characteristics of the heaving soil generated at the actual site were quantitatively analyzed through DCM laboratory test construction. By reproducing a series of construction processes of the DCM method in a large-scale soil tank close to the actual site, the amount of heaving soil was predicted and the elevation characteristics such as elevation, diffusion range, diffusion angle and amount of elevation of the heaving soil were evaluated. As a result of the laboratory test construction, the actual elevation in terms of similarity within the DCM improvement section is 0~8.18m, and an average of 3.50m is observed. The actual diffusion range of the heaving soil converted to the similarity ratio is distributed from 28.0 to 38.0m on the left and right sides of the improvement section. The total amount of heaving soil calculated by the SUFFER program based on the results of the laboratory test construction is 19,901m³. Compared with the injected slurry amount of 16,992m³, the amount of heave compared to the injected amount is analyzed as 85.4%. The diffusion angle of DCM heaving soil, which analyzed the results of DCM laboratory test construction with the SUFFER program, is measured to be 30.0~38.0° at a depth of 50.0m, and is evaluated as an average of 34.0°. On the other hand, based on the DCM laboratory test construction and the analysis results using the program performed in this study, the amount of heaving soil at the DCM depths of 40.0m and 60.0m is predicted.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.143-150
• /
• 1997

In this study, doffusion barrier properties of 1000 $\AA$ thick molybdenum compound(Mo, Mo-N, $MoSi_2$, Mo-Si-N) films were investigated using sheet resistance measurement, X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), Scanning electron mircoscopy(SEM), and Rutherford back-scattering spectrometry(RBS). Each barrier material was deposited by the dc magnetron sputtering and annealed at 300-$800^{\circ}C$ for 30 min in vacuum. Mo and MoSi2 barrier were faied at low temperatures due to Cu diffusion through grain boundaries and defects in Mo thin film and the reaction of Cu with Si within $MoSi_2$, respectively. A failure temperature could be raised to $650^{\circ}C$-30 min in the Mo barrier system and to $700^{\circ}C$-30 min in the Mo-silicide system by replacing Mo and $MoSi_2$ with Mo-N and Mo-Si-N, respectively. The crystallization temperature in the Mo-silicide film was raised by the addition of $N_2$. It is considered that not only the $N_2$, stuffing effect but also the variation of crystallization temperature affects the reaction of Cu with Si within Mo-silicide. It is found that Mo-Si-N is the more effective barrier than Mo, $MoSi_2$, or Mo-N to copper penetraion preventing Cu reaction with the substrate for $30^{\circ}C$min at a temperature higher than $650^{\circ}C$.