• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.356-362
• /
• 1998

가동중인 터빈로터의 계속운전/보수/교체여부 등을 판단하기 위해 해외에서는 결정론적 방법외에 확률론적 파괴역학 해석방법을 이용하여 잔여수명을 평가하고 있다. 한편 국내에서는 현재까지 결정론적 방법을 주로 활용하고 있으며, 향후 확률론적 평가방법의 도입이 예상된다. 이러한 배경에서 본 논문에서는 터빈로터의 수명평가에 확률론적 파괴역학 해석기법을 이용하기 위한 기초연구로 터빈로터를 대상으로 응력해석, 결정론적 파괴해석 및 확률론적 파괴해석을 수행하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.365-372
• /
• 2000

현장상황에 대한 불충분한 자료와 파괴 메커니즘에 대한 불완전한 이해로 인해 발생하는 가변성(variability)과 불확실성(uncertainty)은 암반사면공학뿐만 아니라 지반공학에서 흔히 접하게 되는 문제점이다. 특히 암반사면공학에서는 이러한 가변성과 불확실성이 불연속면의 방향 및 기하학적 특성, 그리고 실내실험 결과의 분산으로 나타난다. 그러나 안전율(factor of safety)의 개념을 기초로 하는 전통적인 결정론적 해석방법(deterministic analysis)은 이러한 분산을 고려하지 않은 채 단일 대표 값만을 이용하여 구조물의 안정성을 판단하여 왔다. 확률론적 해석방법(probabilistic analysis)은 이러한 가변성과 불확실성을 효과적으로 정량화하여 해석에 이용할 수 있는 방법 중의 하나로 제안되었다. 이러한 해석방법은 불연속면의 기하학적 특성과 강도 특성을 확률변수(random variable)로 취급하여 신뢰성이론(reliability theory)과 확률이론(probability theory)을 근거로 분석하였으며 이를 기초로 하여 Monte Carlo Simulation과 같은 해석법을 이용, 구조물의 붕괴가능성을 확률로 표현하였다. 확률론적 해석 방법은 기존의 안전율을 대체하여 구조물의 안정성을 붕괴확률(probability of failure)로 제안하였으며 이 붕괴확률은 안전율의 확률분포함수 (probability density function)에서 안전율이 1보다 작을 가능성을 확률로 나타낸 수치이다. 본 논문에서는 확률론적 해석방법을 이용하여 불연속면 특성들의 확률특성을 고찰하였으며 이를 기초로 하여 암반사면의 안정성 해석에 응용했다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.813-818
• /
• 1995

방사성 폐기물 처분장의 확률론적 안전성 분석은 방사성 폐기물 처분장의 운영에 앞서 수행되어야 할 과제이다. 따라서, 본 연구에서는 폐기물 처분장의 확률론적 안전성 분석을 체계적으로 수행하기 위한 방법론을 개발하여 제시하였다.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.295-307
• /
• 2000

Probabilistic analysis is a powerful method to quantify variability and uncertainty common in engineering geology fields. In rock slope engineering, the uncertainty and variation may be in the form of scatter in orientations and geometries of discontinuities, and also test results. However, in the deterministic analysis, the factor of safety which is used to ensure stability of rock slopes, is based on the fixed representative values for each parameter without a consideration of the scattering in data. For comparison, in the probabilistic analysis, these discontinuity parameters are considered as random variables, and therefore, the reliability and probability theories are utilized to evaluate the possibility of slope failure. Therefore, in the probabilistic analysis, the factor of safety is considered as a random variable and replaced by the probability of failure to measure the level of slope stability. In this study, the stochastic properties of discontinuity parameters are evaluated and the stability of rock slope is analyzed based on the random properties of discontinuity parameters. Then, the results between the deterministic analysis and the probabilistic analysis are compared and the differences between the two analysis methods are explained.

• Journal for History of Mathematics
• /
• v.18 no.4
• /
• pp.101-112
• /
• 2005

In this article, we introduce a generous but eccentric genius in mathematics, Paul Erdos. He invented probabilistic methods, pioneered in their applications to discrete mathematics, and estabilshed new theories, which are regarded as the greatest among his contributions to mathematical world. Here we introduce the probabilistic methods and random graph theory developed by Erdos and look at his life in glance with great respect for him.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.172-179
• /
• 2016

For an evaluation of service life in RC(Reinforced Concrete) structures, deterministic method and probabilistic method considering random variables of design parameters are usually adopted. In the work, surface chloride contents which vary with distance from sea shore and height are investigated from the previous research literature surveys, and they are considered for service life estimation. Through the analysis, the probabilistic method shows much lower results, which is due to variations of design parameters and very low intended durability failure. In the deterministic method, the structures within 250m and higher than 60m are evaluated to be free from chloride attack. In the probabilistic method, those higher than 60m in all the region and higher than 40m and 250m from sea shore are evaluated to satisfy the service life.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.23-29
• /
• 2004

The design earthquake used for the seismic analysis and design of NPP (Nuclear Power Plant) is determined by the deterministic or probabilistic methods. The probabilistic seismic hazard analysis(PSHA) for the nuclear power plant sites was performed for the probabilistic seismic risk assessment. The probabilistic seismic hazard analysis for the nuclear power plant site had been completed as a part of the probabilistic seismic risk assessment. The probabilistic method become a resonable method to determine the design earthquakes for NPPs. In this study, the defining method of the probability based scenario earthquake was established, and as a sample calculation, the probability based scenario earthquakes were estimated by the de-aggregation of the probabilistic seismic hazard. By using this method, it is possible to define the probability based scenario earthquakes for the seismic design and seismic safety evaluation of structures. It is necessary to develop the rational seismic source map and the attenuation equations for the development of reasonable scenario earthquakes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.259-268
• /
• 2016

The service life evaluation in RC(Reinforced Concrete) structure exposed to chloride attack can be classified into deterministic and probabilistic method, and it significantly varies with design parameters. The present work derives PDF (Probability of Durability Failure) and the related service life considering time-dependent diffusion coefficient and internal parameters such as reference diffusion coefficient, critical chloride content, and time-exponent. When critical chloride content increases to 133.3%, the changing ratios of service life are 134.0~145.4% for deterministic method and 149.2%~152.5% for probabilistic method, respectively. In the case of increasing time-exponent to 200%, they increase to 323.8% for deterministic method and 346.0% for probabilistic method. Through adopting time-diffusion coefficient for probabilistic method, reasonable service life evaluation can be achieved, and it is also verified that increasing time-exponent through mineral admixture is very effective to extension of service life in RC structure.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.561-568
• /
• 2002

한국원자력연구소에서 개발중인 액체금속로인 KALIMER는 경수로나 증수로와 근본적으로 설계가 상이하므로 PSA 방법에 대한 새로운 접근방법을 개발해야 한다. 액체금속로 KALIMER에 대한 확률론적 안전성 평가 방법 (PSA, Probabilistic Safety Assessment) 관련 연구는 초기 사건의 도출 및 빈도계산 방법과 주요 계통의 신뢰성 예비 평가에 대한 것이다. 초기 사건이란 원전에 과도 현상을 유발하여 발전소 정지를 초래하는 모든 비정상 사건을 의미하는 것으로 PSA에서 사건 수목을 구성하는 데 기본이 되는 정보이다. 액체금속로는 기존의 경수로 및 중수로와는 전혀 다른 설계를 갖고 있으므로 액체금속로 특유의 초기 사건을 도출하는 방법 및 이들 초기 사건의 빈도를 계산하는 방법에 대한 연구를 수행하였다. KALIMER 주요 계통의 신뢰성 예비 평가를 수행하기 위하여 확률론적 안전성 평가에서 계통분석기법으로 널리 이용되는 고장수목분석의 절차와 방법에 대한 방법론을 선정하여 PSA 방법론을 개발하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.76-86
• /
• 2007

Construction development work invents profit as those finalize object, and a make or break success of project depends on correct analysis and forecast business feasibility at project early. Business feasibility study would be decision-making under precarious situation because is connoting uncertainty that is future. estimate at present visual point essentially. Under uncertainty, a decision-making method is based on probability theory of statistics, but business feasibility study had applied with not feasibility study by probabilistic decision method but it by determinism derision method so far. Therefore in this study doing decision-making by a probability theory method for successful project at early business feasibility study, it present a probabilistic study method that use simulation that can supply a little more correct and reliable data to decision-maker As result, a probabilistic study method is more suitable than deterministic study method as technique for a financial feasibility study of construction development work. Making good use of this probabilistic study method at important business or careful decision-making, because efficient Judgment that is based accuracy and authoritativeness may become available.