• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.198-203
• /
• 2015

This study was performed to evaluate changes in the chemical composition of germinated rough rice with high hydrostatic pressure treatment (HPT). Rough rice was germinated at $37^{\circ}C$ over 6 days (control), and then subjected to HPT at 30 MPa for 24 h. The highest crude protein content was 9.54% in the control sample after 6 days of germination. Crude lipid content increased from 2.04-2.74% (control) to 2.27-3.10% (HPT). HPT samples showed higher values of total free sugar and glucose content than those of the control. The total amino acid value was not significant, but the essential amino acid content increased from 0.45-5.09 mg/g in the control to 1.57-5.30 mg/g in the HPT sample. The major fatty acids were found to be palmitic, oleic, and linoleic acid. The content of oleic acid decreases with HPT, whereas that of linoleic and linolenic acid increased slightly during the initial stages of germination. These results suggest that HPT after germination efficiently depolymerizes chemical components and enhances the content of essential nutrients.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.556-561
• /
• 2019

In this study, the physical and chemical analyses of petroleum residues (pyrolized fuel oil, PFO) were conducted and major components were selected to investigate their fire and explosion characteristics. Major component distribution areas of the PFO were identified via the GC-SIMDIS and MALDI-TOF analyses. In addition, the qualitative analysis of major component distribution areas was performed by GC-MS analysis. Major components of pyrolysis residue were selected based on the results of various analyses such as EA, SARA and TGA. As a result, benzene, toluene and xylene were selected as major components. Finally, the process hazard analysis software tool (PHAST) analysis was performed to investigate the range of maximum damage effect in case of fire and explosion. Toluene presented the highest risk due to the radiation effect of $227kW/m^2$ and 118 m in the case of jet fire. Xylene and benzene showed the maximum radiant heat values of 114 and $151kW/m^2$, respectively. It was also confirmed from the analysis of pasquill stability and wind speed that the radiant heat increased up to 55% according to wind speed in benzene, which was considered to be a main factor increasing the influence range.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.291-300
• /
• 2022

In this study, the physical properties of the medium and changes in the wood chemical composition of the sawdust were investigated during the cultivation of oak mushroom sawdust bags, and the following results were obtained. After inoculation, the weight of the medium decreased during the incubation period. It is determined that this is not due to evaporation of moisture containing the medium or decomposition of sawdust, but to decomposition of rice bran, a low molecular substance added to the medium. It was confirmed that the moisture content of the medium was steadily increased during incubation, and it was estimated that the organic substrates such as rice brane in the medium was decomposed by mycelium, and water, one of the decomposition products of organic substrates, caused an increase in the moisture content of the medium. Along with the increase in the harvest of oak mushrooms, the proportion of organic substances such as holocellulose and lignin, the main components of the wood cell wall of sawdust, steadily decreased. In particular, the degradation characteristics of the wood cell wall component of shiitake, which is a white rot fungi, were confirmed by higher lignin reduction rate than that of holocellulose. On the other hand, ash, which is an inorganic material, increased with an increase in the number of mushroom harvests. The increase in the amount of ash in the medium may have been due to the decrease in the organic matter content such as holocellulose and lignin.

• The Korean Journal of Mycology
• /
• v.12 no.3
• /
• pp.93-98
• /
• 1984

The effects of cultural conditions on the mycelial growth and fruit-body formation and the yield of Pleurotus sajor-caju grown in rice straw medium were examined. The change of content of chemical components of mushroom and the medium during the cultivation period was also examined. The growth of mycelium was best in the medium sterilized for 60 min at $1.2kg/cm^2$ with a moisture content of 60%. The optimum pH and temperature for mycelial growth were 6.0 and $25^{\circ}C$, respectively, whereas the optimum pH and temperature for fruit-body formation ranged from 5.0 to 6.0 and from 20 to $30^{\circ}C$, respectively. Rice bran and starch cake were better than the other additives used for both mycelial growth and fruit-body formation. The optimum concentration of rice bran in the medium was 10%. The total yield of mushroom was $20.2kg/m^2$, 66% of which was prouduced from the first and second cropping period. As the harvest proceeded, the crude fiber cotent increased in the mushroom, whereas it decreased in the medium. The content of free sugar and crude ash, on the other hand, decreased in the mushroom, whereas it increased in the medium. The content of the other chemical components examined decreased in both the mush­room and the medium.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.1
• /
• pp.136-144
• /
• 1995

근래 양질의 하천골재가 거의 고갈상태에 직면함에 따라 쇄석골재의 사용이 보편화되고 있는 우리나라의 실정에 비추어 볼 때 골재의 화학반응에 대한 연구의 필요성이 점차 증대되고 있다. 본 연구에서는 우리나라에서 실제 쇄석골재를 생산하는 238곳 중 63곳의 시료골재를 채취하여 화학적, 광물학적, 모르터 바 분석실험을 실시하여 골재의 화학반응성을 규명하였다. 분석시험 결과 대부분의 시료골재가 화학반응성을 나타내지 않았으나 광물학적 분석에서 유해광물로 알려진 성분들이 여러 시료골재에 포함되어 있었다. 따라서 해사의 사용 등 점차 화학반응 환경이 공존하게 되면 골재의 화학반응이 일어날 가능성이 커지므로 계속적이고 심도있는 연구가 요구되고 있다.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.91-95
• /
• 1998

Some physical properties and chemical compositions of Lycii Cortex depending on the various extracting conditions were investigated for their changes during extraction with ethanol and water. Solid matter and contents of total sugar in water extracts were higher than those of ethanol extract. but contents of tannic acid in ethanol extracts was higher than that in water extracts. The methanol extract of the Lycii Cortex were fractionated with ethyl ether. ethyl acetate. n-butanol and water. The yield was higher in the order of water > n - butanol > ethyl ether and ethyl acetate fraction. Turbidity of water extraction was higher than that of ethanol extraction.

• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.67-80
• /
• 2000

We studied petrological and geochemical characteristics of the Mesozoic volcanic rocks in the Da Hinggan Ling area northeast China, and discussed tectonic settings and origin of the Mesozoic volcanic rocks in northeast Asia. Volcanic rocks in Da Hinggan Ling area are composed of alkaline to subalkaline basalt-basaltic andesite-andesite-dacite-rhyolite, showing typical BAR(basalt-andesite-rhyolite) association. However, most of the volcanic rocks are basaltic and rhyolitic in composition, and andesitic rocks are relatively rare, which shows bimodal characteristics. Rb, Ba, Th and other incompatible element contents in the volcanic rocks are enriched, but the contents decrease with increasing the compatibility. REEs are fractionated and REE patterns of volcanic rocks are characterized by a high LILE/HFSE. On the tectonomagmatic discriminant diagram of Hf-Th-Nb, they fall into the fields for subduction-related destructive plate margin basalts and its differentiates. We suggest that the tectonomagmatic setting of Da Hinggan Ling area was located at the continental margin arc related with subduction environment during the Mesozoic time or may be derived from mantle plume contaminated geochemically from subducting slabs, although it is, at present within the Asia continent.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.511-525
• /
• 2003

The Okcheon Group in the southwestern part of the Okcheon Metamorphic Belt is subdivided into two distinct tectonostratigraphic units: the Boeun unit in the south and the Pibanryeong unit in the north. The Boeun unit consists of petites, psammites, carbonaceous petites, limestones and pebble-bearing quartzites. The Pibanryeong unit is composed of petites, well-sorted fine-grained psammites, carbonaceous psammites and quartzites. In order to outlining stratigraphy and depositional environments of the Okcheon Group, detailed stratigraphic sections were measured in three locations; one section(Gosan section) of the Boeun unit and two sections(Sorungjae and Hwangryeongzae sections) of the Pibanryeong unit. The Gosan section of the Boeun unit is interpreted to be deposited in the shallow marine environments, whereas the Sorungjae and Hwangryeonaiae sections of the Pibanryeong unit appear to be deposited in slope and deep basin environments. This result indicates rapid subsidence between deposition of the Boeun and Pibanryeong units in sedimentary environment. The trace of sedimentological environments in the Hwasan area was investigated by geochemical analysis of 109 metapelitic and psammitic rock samples. Distinct chemical variations of politic and psammitic rocks from the Boeun and Pibanryeong units in the study area are evident from plots of major elements and $A1_2O_3$/$SiO_2$ versus Basicity Index($Fe_2O_3{＋}MgO$)/($SiO_2{＋}K_2O{＋}Na_2O$). The rocks show a progressive chemical trend from the Boeun unit to the Pibanryeong unit on these diagrams. They in the southern sector of the Boeun unit display lower values and a comparatively wide range of $A1_2O_3$/$SiO_2$ and Basicity Index, as compared with those from the northern sector of the Boeun and Pibanryeong units. The southern sector of the Pibanryeong unit including narrow staurolite-bearing zone is characterized by values that are transitional between the Boeun and Pibanryeong units. These data, combined with depositional environment progressively deepened towards the northwest, support a half-graben model for the Okcheon basin, as proposed by Cluzel et al.(1990)

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.221-227
• /
• 2015

Animal glue is a traditional material that was used widely as an adhesive in cultural artifacts, such as Buddhist paintings, dancheong (traditional multicolored paintwork on wooden buildings), mother-of-pearl inlay, and so on. Spectroscopic methods, such as infrared spectroscopy, have been used for the analysis of animal glue. However, such methods do not yield sufficient information about the constituents of the glue. Because pyrolysis/GC/MS analysis is able to estimate the components of a material through the examination of its pyrolyzed products, it is useful for the analysis of polymeric material. In this study, pyrolysis/GC/MS analysis was used to determine the chemical composition of animal glue. The appropriate conditions for analyzing animal glue were established by examining pyrolysis temperature, quantity of the sample, and the repeatability of the method. Some products of pyrolysis were identified. We also analyzed commercial gelatin and animal glue using the established method and found almost no differences in chromatograms among the samples. The results will be used as supporting data to confirm the use of animal glue in cultural artifacts and to replace traditional animal glue by commercial gelatin.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.251-265
• /
• 1998

Punch'ong and whiteware sherds excavated from four kilns located in Ch'unghyodong, Kwangju, Chollanamdo were analyzed for their body and glaze composition. They are classified into eight different groups by the site and layer from which they were collected. In principal component analysis of major composition, the punch'ong body separates out into several different groups. CHE2, made in early fifteenth century, has a higher aluminum and lower iron content compared to the later groups of lower grade. Whiteware body has a very high aluminum content of around 30 wt. in both soft type and hard type. Punch'ong glaze was determined to be lime type and whiteware alkali-lime type.