• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.327-335
• /
• 1993

Phase relations in the system Pd-Sb-Te were investigated at $1000^{\circ}$, $800^{\circ}$, and $600^{\circ}C$, using the sealed-capsule technique; the quenched products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. At $1000^{\circ}C$, the solid phases Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, and $Pd_5Sb_2$ are stable with a liquid phase that occupies most of the isothermal diagram. Additional solid phases at $800^{\circ}C$ are $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, and a continuous $Pd_{20}Te_7-Pd_{20}Sb_7$ solid solution becomes stable. At $600^{\circ}$, $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, and Sb and continuous PdSb-PdTe and $PdTe-PdTe_2$ solid solutions are stable. All the solid phases exhibit solid solution, mainly by substitution between Sb and Te to an extent that varies with temperature of formation. The maximum substitution (at.%) of Te for Sb in the Pd-Sb phases is: 44.3 in $Pd_8Sb_3$, 52.0 in $Pd_{31}Sb_{12}$, 46.2 in $Pd_5Sb_2$ at $800^{\circ}C$; 15.3 in $Pd_5Sb_3$, 68.3 in $PdSb_2$ at $600^{\circ}C$. The maximum substitution (at.%) of Sb for Te in the Pd-Te phases is 34.5 in $Pd_5Sb_3$ at $800^{\circ}C$, and 41.6 in $Pd_7Te_3$, 5.2 in $Pd_{17}T_4$, 12.4 in $Pd_9Te_4$, and 19.1 in $PdTe_2$ at $600^{\circ}C$. Physical properties and X-ray data of the synthetic $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, and $Sb_2Te_3$ correspond very well with those of telluropalladinite, kotulskite, merenskyite, mertieite II, sudburyite, and tellurantimony, respectively. Because X-ray powder diffraction data consistently reveal a 310 peak ($2.035{\AA}$), the $PdSb_2$ phase is most probably of cubic structure with space group $P2_13$. The X-ray powder pattern of a phase with PdSbTe composition, synthesized at $600^{\circ}C$, compares well with that of testibipalladite. Therefore, testibiopalladite may be a member of the $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$ solid solution series which is cubic and $P2_13$ in symmetry. Thus the ideal fonnula for testibiopalladite, presently PdSbTe, must be revised to PdTe(Sb, Te). Borovskite($pd_3SbTe_4$) has not been found in the synthetic system in the temperature range $1000^{\circ}-600^{\circ}C$.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.567-579
• /
• 2004

To investigate the spatial distribution and community structure of heterotrophic protists, we collected water samples at 23 stations of central Barents Sea in August, 2003. This study area was divided into three area with physico-chemical and chi-a distribution characteristics: Area I of warm Atlantic water mass, Area III of cold Arctic water mass and Area II of mixed water mass. Chl-a concentration ranged from 0.18 to $1.04{\mu}g\;l^{-1}$ and was highest in Area I. The nano-sized chi-a accounted fur more than 80% of the total chi-a biomass in this study area. The contribution of nano-sized chi-a to total chi-a was higher in Area I than in Area II. Communities of heterotrophic protists were classified into three groups such as heterotrophic nanoflagellates (HNF), ciliates and heterotrophic dinoflagellates (HDF). During the study periods, carbon biomass of heterotrophic protists range from 11.3 to $38.7{\mu}gC\;l^{-1}$ (average $21.0{\mu}gC\;l^{-1}$), and were highest in Area I and were lowest in Area III. The biomass of ciliates ranged from 4.2 to $19.3{\mu}gC\;l^{-1}$ and contributed 31.5-66.9% (average 48.1%) to the biomass of heterotrophic protists. Ciliates to heterotrophic protists biomass accounted fur more than 50% in Area I. Heterotrophic dinoflagellates biomass ranged from 5.7 to $18.4{\mu}gC\;l^{-1}$ and contributed 27.1 to 56.3% (average 42.8%) of heterotrophic protists. Heterotrophic dinoflakellates to heterotrophic protists biomass accounted fur about 50% in Area III. Heterotrophic nanoflageltate biomass ranged from 0.5 to $3.4{\mu}gC\;l^{-1}$ and contributed 3.2 to 19.6% (average 9.2%) of heterotrophic protists. Heterotrophic nanoflagellates to heterotrophic protists biomass accounted fur more than 10% in Area III. These results indicate that the relative importance and structure of heterotrophic protists may vary according to water mass. Heterotrophic protists and phytoplankton biomass showed strong positive correlation in the study area The results suggest that heterotrophic protists are important consumers of phytoplankton, and protists might play a pivotal role in organic carbon cycling In the pelagic ecosystem of this study area during the study period.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.12a
• /
• pp.29-34
• /
• 2000

산업 발달에 따라 날로 많은 식품들이 새롭게 개발되어지고 있다. 또한 이와 병행해서 식품으로 인한 알레르기 발생 빈도도 날로 증가하고 있으며 그 증상 또한 점차 심화되고 있는 것이 세계적인 추세이다. 우리나라도 예외는 아니어서 일반 알레르기 환자뿐 아니라 식품으로 인한 알레르기 환자들이 점차 증가됨이 보고되어지고 있다. 농산물 시장의 수입개방이후 우리나라에는 많은 해외 농산물이 수입되어지고 있으며 그 중 작년 한해의 경우 총 수입 농산물의 10%를 넘는 유전자 재조합 농산물이 우리나라에 수입되어진 것으로 통계 보고되어졌다. 이러한 관점에서 알레르기 환자의 증가와 새로운 식품 (특히 유전자 재조합 식품)의 증가에는 서로 관련성이 있을 것으로 추측되어지고 있어 (새로운) 식품에 대한 알레르기성의 예측과 관리가 필요한 실정이다. 이에 몇몇 발표된 유전자 재조합 식품에 관련된 알레르기성 검사 논문들과 실험실에서 이루어진 연구 결과들을 중심으로 유전자 재조합 식품의 알레르기 위험성에 대해 알아보고자 한다. 일반적으로 식품의 단백질이 알레르겐(allergen)으로 작용하기 위해서는 먼저 소화효소에 의해 분해되어지고 장에서 흡수되어져서 immunopotent cell에 의해 process 되어 immune system에 present 되어져야 한다. 따라서 단백질로 인한 알레르기 반응은 그 단백질의 자연적 형태 뿐만이 아니라 소화 효소에 분해된 단편들의 구조 또는 다른 알레르겐 단백질과의 유사 구조로 인한 교차 반응에 의해 발생함을 기억해야 한다. 식품 단백질 중 어떤 단백질이 알레르겐으로 작용하는가에 대한 특이성 조사에 많은 관심이 집중되어지고 있지만 아직까지는 대략 다섯 개 정도의 일반적인 특성으로서 요약되어질 수 있다. 그러나 이러한 대략의 특성에 적용되지 않는 식품 알레르겐도 많음을 잊어서는 안 될 것이다. 알레르겐으로 작용하는 식품 단백질의 일반적 특성 1. 좋은 수용성 2. 식품내에 많은 부분을 차지하는 주 단백질이 주 알레르겐으로 작용 3. 단백질내에 하나 이상의 IgE-binding site 존재 4. 위장액에 대한 저항성 5. 10～70 kDa 크기 유전자 재조합 기술이란 말 그대로 유전자를 인위적으로 새롭게 조합하는 기술로 이전의 기술로는 불가능했던 유전적 변형을 농작물과 동물에 가능하게 했으며 이로 인해 유전적으로 변형된 식용 동식물의 개발이 가능하게 되었다. 새로운 유전인자를 개체에 삽입함으로 새로운 단백질이 발현 될수 있고 그로 인해 1) 해충과 질병에 대한 저항성 증가, 2) 화학 제초제에 대한 새로운 저항성 부여, 3) 식품의 저장성 향상, 4) 식품의 영향적 보충/향상 등의 이점을 얻을 수 있다 (표 1). 세계적으로 유전자 재조합 된 새로운 농산물의 재배는 날로 증가추세에 있으며 그 중에서 가장 많은 부분을 차지하는 농산물로 soybean을 들 수 있으며 (표 2) soybean을 중심으로 그 알레르기성의 변화가 연구 조사된 몇 가지 예를 살펴보고자 한다. (표 3)에 요약된 soybean중 첫 번째 경우는 재초제에 대한 저항성을 높여주기 위해 Agrobacterium에 존재하는 EPSPS라는 단백질을 콩에서 발현하도록 찬 유전자 재조합 된 콩의 경우이다. 이 콩의 경우에는 첫째. 이전된 새로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한 콩으로 결론짓고 있다. 영양성을 높이기 위해 Brazil nut에서 methionine 함량이 풍부한 2s albumine을 콩에서 발현하도록 한 두 번째 유전자 재조합 콩의 경우 이전된 단백질 때문에 Brazil nut에 알레르기 반응을 일으키는 알레르기 환자들을 조사한 결과 역시 재조합 된 콩에도 알레르기 반응을 일으켰다는 보고이다. Brazil nut에서 콩으로 이전된 단백질이 Brazil nut에서의 알레르기성을 그대로 유지한 점을 볼 때 새로운 단백질이 어디에서 유래하는가가 중요함을 잘 보여준 연구이다 세 번째 콩의 경우 역시 영양성을 높여주기 위해 corn에서 10 kDa과 HSZ 단백질을 콩에서 발현하도록 유전자 재조합했는데 이 콩의 경우는 알레르기 환자들이 유전자 재조합 된 콩과 자연 콩에 반응의 차이를 나타내지 않았다는 결과 보고이다. 위의 세 실험 결과들을 종합해 볼 때 무엇보다도 새롭게 발현된 단백질이 원래 어떤 성질을 갖고 있으며 어디에서 유래했는지가 알레르기성 조사에 중요한 역할을 한다 할 수 있겠다. 또한 유전자 재조합된 식품들은 알레르기 환자들을 위해 표기되어져야 할 것인데 이를 위한 알레르기성 검사 실험은 공공단체를 통해 이루어져야 할 것이며 환자들마다 알레르겐으로 작용하는 단백질의 인식부위(epitope)가 다를 수 있기 때문에 적어도 10명 이상의 알레르기 환자들이 조사되어져서 검사가 이루어져야 할 것이다. 환자들의 혈청을 통한 in vitro 실험에서는 ELISA, RAST, immunoblotting과 같은 검사 방법들이 적용될 수 있고, 그 결과가 음성인 경우에 그 다음 단계로 in vivo 실험에서는 직접 환자의 피부반응검사 (skin prick test)나 DBPCFC (double-blind placebo-controlled food challenge) 검사 방법을 통해 확인되어져서 이 모든 경우가 음성인 경우와 하나라도 양성인 경우를 구별하여 식품에 표기함으로 알레르기 환자들의 유전자 재조합 식품에 대한 안전성이 보장되어져야 할 것이다.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.4 s.46
• /
• pp.167-179
• /
• 2006

Division of granites in the Galmal-Yeonbug area, northern Gyeonggi, can be grey hornblende biotite granite (JHBG), biotite granite (JBG) and pink hornblende biotite granite (CHBG) by lithofacies. JHBG of small stock occurs as medium-grained with grey color and minute sphene. JBG occurs as medium-grained and light grey to grey in the north-east part of the area. The main study target CHBG covers in the north-southeast part of the area, and occurs medium-to coarse-grained with pink color. CHBG shows partly minute miaroles, and pegmatitic pocket with druse texture. From the mineral age data (K-Ar method). JHBG and JBG and CHBG are the igneous activity products of Daebo orogeny with different Jurassic and Bulgugsa disturbance of Cretaceous, respectively. And the age data also agree with geologic occurrences and interpretations of the granites in the field. CHBG consists of quartz, plagioclase, alkali-feldspar, biotite, hornblende, allanite, apatite, zircon, some calcite and opaques. Among them, alkalifeldspar and calcite occur characteristically in mostly perthitic othoclase and secondary filling of minutely miarolitic cavity, respectively. In modal analysis and QAP diagram, CHBG plots in granite field, and especially boundary of monzo-and syeno-granite fields. From the major oxide variations, molar A/CNK, $SiO_{2}\;vs\;K_{2}O$, AMF and so on, CHBG belongs to the acidic, peraluminous and high-K calc-alkaline, and was late differentiation product of single granitic magma. Barium and strontium have also dominantly differentiation trend, and in CaO vs Sr and $K_{2}O$ vs Sr, Sr was more participitated in the fractionation of plagioclase than that of alkali-feldspar. Normalized REE concentrations to chondrite value have parallel and gradual LREE enrichment and HREE depletion patterns, and weak Eu negative anomalies and narrow ranges of normalized Eu can suggest that plagioclase fractionations occurred mildly in the whole CHBG.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1993

$TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.219-228
• /
• 2009

The construction procedures and artificial turf maintenance program on golf course definitely influence on the distortion of its environment. Soil microbial communities in soil profile were affected directly by those practises on turf areas. In Jeju island, the environmental impact assessment has been required to apply the first quality class granular activated carbon(GAC), which has a high absorbent character to agricultural chemicals, on the soil profiles of golf green system to reduce the pesticide leaching to ground water. This research was carried out to analyze the changes of microbial communities and chemical properties on soil profiles where GAC had been applied at the construction stage at two golf courses in Jeju. The changes of soil microbial population and chemical properties associated with construction methods of soil profile and agrochemical management program were analyzed by monthly at the surface and sub-soil profiles during April through October, 2007. The total numbers of bacteria and fungi, soil moisture content, soil physio-chemical properties were measured on greens and fairways of the both golf courses with different GAC treatment on the green and fairway soil profiles. The results showed that GAC had positive effects on the water holding capacity, pH and EC, however, it did not improved the holding capacity of available nutrients ${NO_3}^-,{NH_4}^+$, and phosphorus by its sorption phenomenon. In microbial count test, the total numbers of bacteria and fungi showed a great variation during sampling dates. That may directly relate to the agrochemical application, however, the ratio of total bacterial number versus total fungus number showed a constant value on a sub-soil of 15~30cm depth. Thus, the construction method of GAC in soil profile, and application of fertilizer and pesticide, both impacted on the changes of microbial population. It's means that the construction method of soil profile and turf management using agro-materials might greatly affect on the turfgrass culture and the environment of golf course.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.417-426
• /
• 2023

Rapid climate change has resulted in glacial retreat and increased meltwater inputs in the Antarctic Peninsula, including King George Island where Marian Cove is located. Consequently, these phenomena are expected to induce changes in the water column light properties, which in turn will affect phytoplankton communities. To comprehend the effects of glacial retreat on the marine ecosystem in Marian Cove, we investigated on phytoplankton biomass (chlorophyll-a, chl-a) and various environment parameters in this area in December 2021 and January 2022. The average temperature at the euphotic depth in January 2022 (1.41 ± 0.13 ℃) was higher than that in December 2021 (0.87 ± 0.17 ℃). Contrastingly, the average salinity was lower in January 2022 (33.9 ± 0.10 psu) than in December 2021 (34.1 ± 0.12 psu). Major nutrients, including dissolved inorganic nitrogen, phosphate, and silicate, were sufficiently high, and thus, did not act as limiting factors for phytoplankton biomass. In December 2021 and January 2022, the mean chl-a concentrations were 1.03 ± 0.64 and 0.66 ± 0.15㎍ L^-1, respectively. The mean concentration of suspended particulate matter (SPM) was 24.9 ± 3.54 mgL^-1 during the study period, with elevated values observed in the vicinity of the inner glacier. However, relative lower chl-a concentrations were observed near the inner glacier, possibly due to high SPM load from the glacier, resulting in reduced light attenuation by SPM shading. Furthermore, the proportion of nanophytoplankton exceeded 70% in the inner cove, contributing to elevated mean fractions of nanophytoplankton in the glacier retreat marine ecosystem. Overall, our study indicated that freshwater and SPM inputs from glacial meltwater may possibly act as main factors controlling the dynamics of phytoplankton communities in glacier retreat areas. The findings may also serve as fundamental data for better understanding the carbon cycle in Marian Cove.