• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.8-13
• /
• 1999

The article 49-2 of Industrial Safety Law requires that all the owners of industrial plants which contains dangerous facilities perform the process safety management. That is, this law requires the owners of industrial plants to take necessary measures to prevent fire, harmful gas leaking, explosion, and other serious accidents that could cause demage and injuries to the employees. So far, domestic chemical plants have tried to invest money and time in safety management. But, such efforts have been made only in chemical plants that were subsidiaries of large business groups. Moreover, since the economic crisis of Korea which is symbolized by the IMF bailout, small and medium size companies could not afford to invest in safety management. Their major concern is to increase productivity and thereby, survive in this crisis. The goal of this research is to develop the process safety management system that can help small and medium size companies to positively secure the process safety management. So, in developing the process safety management system, the financial and practical difficulties of such companies are fully taken into consideration.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.329-330
• /
• 2017

재난은 인류의 발전과 더불어 다양하게 발생되어왔다. 최근 21세기 들어 발생하는 재난은 그 현상이 더욱 다양하고 복잡하며 그 피해의 정도가 대규모로 진행되는 경우가 많아 졌다. 태풍, 집중호우, 강풍, 폭설, 지진, 황사 등의 자연재난은 지구온난화현상으로 국내뿐만 아니라 전 세계적으로 커다란 영향력을 미치고 있으며, 화재, 구축물의 붕괴, 지하철사고, 테러 및 감염병 등의 사회 재난도 더욱더 증가하고 있는 추세이다. 나아가 사스, 메르스, 지카 바이러스 및 대형 테러 등 전 세계적 차원의 사회 재난의 발생 또한 급증하고 있다. 이와 같이 현대사회에서 발생하는 재난는 개인이나 국가의 정책만으로 예방하고 관리할 수 없는 특성이 있다. 따라서, 자본주의 경제의 한축을 이루고 있는 기업의 재난을 관리하여 연속성을 확보하고 더나아가 리질리언스(Resilence)를 보장하기 위한 일환으로 2007년 7월 재해경감을 위한 기업의 자율 활동 지원에 관한 법률(이하, 기업재해경감법 이라함.)이 공포된 지 약 10여년이 경과하였다. 이는 법 제도화를 통하여 기업의 재해경감활동을 지원하기 취지에서 출발한 것 이다. 그 후 현재 까지 어느 정도의 발전이 있었지만 경과 년 수에 비해 아직 미흡한 실정이다. 이후 그 기업들이 좀 더 원활하게 재해경감활동을 위한 계획을 수립, 실행, 검토 및 유지하기 위한 지침으로서 기업재난관리표준을 2010년 4월 2일 제정하였고 이후 재해경감활동 수립계획을 제정하여 시행하기에 이르렀다. 또한, 기업재난관리표준은 제정된 이후 2013년 12월 9일 전면 개정작업을 통해 경영관리 프로세스 모델(Plan-Do-Check-Act)이 적용된 관리체계를 접목시키고 용어정의를 국제표준과 일치시켜 기업재해경감활동 상의 혼선을 방지하기 위한 노력을 하였다. 현 정부에서는 주무부처가 바뀌고 조직이 변화되어 행정안전부고시 제2017-1호(2017.07.26.일)로 개정되어 현재에 이르고 있다. 본 논문에서는 기업재난관리표준과 연관된 제반 법령 및 규정 등에 대한 법적성격 과 지위를 규명하고, 기업재난관리표준의 관련분야 적용 시 문제점 및 바람직한 제도개선 방향을 제시하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.307-310
• /
• 2010

Ubiquitous society to build basic infrastructure in the power supply and power equipment safety is important. U-City in order to prevent the disaster of U-IT Power Equipment Performance Module and the security for the safety of the U-City is necessary. In this paper, the power unit of U-IT module, temperature sensor, humidity sensor, equipped with sensors arranged throughout the fire, and home distribution boards, Home Network Wall-Pad, Blocker, MPNP black boxes, arc detection, arc safety equipment, outlet of the modular performance evaluation and security measures will be studied. U-IT power devices and sensors to analyze the information conveyed by proactive risk and ensure safety, access control, authentication, security safeguards, such as U-IT integrated management system for electrical safety and strengthen the security, safety and security with a U-City will contribute to the construction and operation.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.81-86
• /
• 2013

Accidents of dust explosion has been occurred in various industries as a plastics, pharmaceuticals, timber, grain storage, solid fuels and chemicals. In this study, the silo dust, hammer mill dust and Nyusong dust in the manufacturing process of the particle board to utilize west wood, which were selected for this experiment and were evaluated the characteristics of dust explosion. The explosion characteristics such as a maximum explosion pressure, explosion index, lower explosive limit, and minimum ignition energy in suspended dust of the wood by Siwek 20 L apparatus were measured and evaluated for the experiment. The results of this study can be used the process safety measures to prevent accidents of fire and explosion in the suspended dust of wood.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.35-42
• /
• 2017

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water or other reasons in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of plating bath and most of raw materials in the bath have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, in previous study, we tried to monitor and notice the dangerous change of temperature of water immediately to prevent the risk of fire from plating process. However, unfortunately previous studies were not able to shut out the fundamental cause of fire since bath temperature sensor can detect air temperature when the level sensor was malfunctioned. In this paper we developed the Teflon heater which contains a built in temperature sensor and improved plating equipment system. Teflon heater is improved using Pt $100{\Omega}$ sensor which can detect until $600^{\circ}C$. When the bath temperature sensor detects over $60^{\circ}C$ or the Teflon heater sensor detects over $240^{\circ}C$ they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of $240^{\circ}C$ by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.81-86
• /
• 2011

Without a special mineral resources in Korea, such as petrochemical industries, electronics and automotive industries to supply the basic material, but remains a key industry locations. Gongjeongsang dealing with hazardous materials, such as a fire or explosion hazard, and from this site sangjonhae safety regulations to protect human and material disaster prevention activities are focused. However, depending on the actual implementation of standardized safety regulations as necessary if not originally intended, proper objectivity and reliability of safety regulations, as well as impaired resulting in a waste of public and private administrative power and petrochemical industries and the competitiveness of the entire drop factor will. Accordingly, this study petrochemical plant is applied to a representative safety regulations, items for their safety are needed and these regulations as being implemented that was identified, according to a study, some of the need for regulation and implementation both in terms of reliability was low.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.113-118
• /
• 2019

A solar power plant is a facility that produces electricity. As the risk of fire and electric shock accidents is diversified, the risk of workers, surrounding people, and facilities is increased, preventing safety accidents and promptly responding to safety accidents Is emerging. In light of the necessity of such development, it is necessary to develop a solar power generation management system that can diagnose and maintain the problems of the power generation system in real time by developing technologies for collecting and analyzing the data produced by the solar power generation system As a result, the utilization rate and the maintenance cost can be reduced. In order to do this, it is necessary to accurately predict the solar power generation amount in the present state, to diagnose the abnormality of the current power generation state and to grasp the abnormal position, and to use the model considering economical efficiency when the abnormal position is grasped, And the time and other information should be provided.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.267-281
• /
• 2012

SCADA system is a computer system that monitors and controls the national infrastructure or industrial process including transportation facilities, water treatment and distribution, electrical power transmission and distribution, and gas pipelines. The SCADA system has been operated in a closed network, but it changes to open network as information and communication technology is developed rapidly. As the way of connecting with outside user extends, the possibility of exploitation of vulnerability of SCADA system gets high. The methodology to protect the possible huge damage caused by malicious user should be developed. In this paper, we proposed anomaly detection based intrusion detection methodology by estimating self-similarity of SCADA system.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.78-84
• /
• 2020

The F&EI technique is one of the risk assessments with many advantages. It can save time and effort compared to quantitative risk assessment (QRA). By using the evaluation result of this technique, it is possible to check the effectiveness of the investment cost. In addition, a relative risk ranking can be created and used to establish the facility management cycle and to prioritize investment. However, evaluating the target process can be evaluated more than the actual risk since the LCCF, a loss prevention measure, is too limited. In addition, calculating premiums via this method can result in excessive premiums, making it difficult to evaluate the risk precisely. Therefore, new safety guard was added to the LCCF of the F&EI risk assessment with reference to HAZOP and LOPA techniques. Newly added LCCFs are Deflagration arrester, Check valve, SIS, and Vacuum beaker, etc. As a case study, F&EI risk assessment was performed on Acetone storage tank of a API (Active pharmaceutical ingredient) plant to compare actual MPPD. The estimated loss amount was 592,558$ for the existing technique and 563,571$ for the improved technique, which was reduced by about 5% compared to the previous one.This proved that a more precise evaluation is possible and that the efforts for safety at the workplace are reflected in the evaluation results.