• 전자공학회논문지 IE
• /
• v.48 no.3
• /
• pp.26-32
• /
• 2011

This paper proposed that the method be searched for optimal route of evacuation by algorithm using potential field in specific situation, fire. When robot met an obstacle to be indicated it to ignition point, the installed sensor could be detected the point in restricted area. In according as the data of a fire detection sensor and a sensor complex in a building, the information was transmitted to server which computed optimal route of evacuation by algorithm using potential field. After that, it was able to blow a siren and mark the safe-path with using wireless device such as smart-phone. It was confirmed that the proposed method in functional test, fire emergency evacuation algorithm using potential field, was advanced in circumstance of simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.52-58
• /
• 2009

When a fire breaks out, it is frequent that large sized miserable death is happened by seriousness of poisonous gas and peculiarity of space because the building construction is recently more complex and diverse. So early countermeasure in preparation for evacuation escape linked directly with a loss of lives is pressing. Because escape light that mark fixing one-way of existing way is not efficiently extricated refugees from dangers when a fire breaks out, construction of system that can extricate refugees from dangers and suppress early a fire by grasping correctly fire point is required urgently. When a fire breaks out, all escape lights connected with fire sensor and reception group which have ill aiming in these point will lead people to safe emergency entrance of opposite direction of place that a fire is broken out after being calculated the direction and speed of flame and smoke. There is the purpose of my research in development of artificial intelligent directional escape light that can mark direction to most suitable pull-out and assist in early extinguishing a fire.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.378-383
• /
• 2011

지능형 터널 배연시스템은 터널상부의 온도를 감지하는 온도감지부에서 들어오는 신호를 해독하여 화재위치 및 화재크기를 선정하고 제연설비의 운전방향 및 배연량을 조절함으로써 연기를 효율적으로 제어할 수 있는 시스템이다. 지능형 터널 배연시스템의 성능을 검증하기 위하여 실물터널의 크기를 1/60로 축소한 모델에서 두가지의 화원위치에 따라 실험을 수행하였다. 화재 발생 후 초기에는 온도가 상승하다가 제연팬이 작동하면 온도가 급격히 낮아진 후 일정하게 유지되면서 서서히 증가한다. 터널화재시 승객의 피난 장애를 주는 연기의 제어를 통해 터널의 안전성을 향상시킬 수 있는 것을 확인하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.433-434
• /
• 2019

전 세계적으로 돌발적인 인공 재해로 인해 많은 인명 피해가 발생하고 있다. 이러한 재해는 발 빠른 대피가 중요하며 신속한 대피를 위해서는 재해 발생 여부를 빠르게 감지해야 한다. 본 논문에서는 공공장소에서 화재, 테러 등의 재해 발생 여부를 신속하게 파악하기 위해 재난 탐지 모델을 제안하였다. 스마트 폰에 내장되어있는 가속도 센서를 이용하여 평상시 상황과 재해 발생시 인간 행동에 대한 데이터를 얻고, 제안한 LSTM 딥러닝 모델을 통해 재난 발생을 즉시 감지 할 수 있다는 것을 확인하였다.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.511-517
• /
• 2014

Recently, the fire by sheath heater has been occurred frequently on winter season. The sheath heater has simple internal structure and boils water simply. Therefore, the use of sheath heater has been increased. In this study, found the fire hazard property of sheath heater from understanding the fire mechanism through the experiment to get the measure for decreasing the occurrence of fire. For the analysis of the fire hazard property of the sheath heater, performed the test of temperature change and ignition temperature by using current product. On the result of test, the sheath heaters are the most dangerous appliance to arise fire. Water temperature controller attached to sheath heater is not sufficient to prevent overheating it. The sheath heater should have level switch of water and temperature controller for heater itself to shut off the power supply. Because the cause of fire by sheath heater is overheating itself in the situation of lack water.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.383-387
• /
• 2006

본 연구에서는 신속하고 정확한 산불감지를 위해 센서 네트워크 기술 및 무인 항공 기술을 접목한 새로운 형태의 화재 감지 시스템을 제안하고자 한다. 제안된 시스템은 광범위한 영역에 설치되는 다수의 센서 노드들과 이 영역위에서 자유로이 비행하면서 실시간으로 센서 노드에서 계측된 데이터를 수집하는 헬리콥터 및 헬리콥터에 장착되어 화재발생지점의 화상정보를 취득하고 이를 원격의 서버로 데이터를 무선 전송할 수 있는 임베디드 시스템으로 구성된다. 또한 산불 감지용 테스트베드를 제작하여 설계 제작된 시스템의 실제 적용을 통해 제안된 시스템의 유용성을 확인하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.245-247
• /
• 2022

컨테이너선에서 스위치보드와 리퍼컨테이너의화재 발생 전과 후를 CCTV 및 열화상카메라, 추가센서류로 상시 모니터링하여, 화재 전 이상감지와 화재 후 불꽃, 연기 등의 화재 종류를 선내 알림하여 즉시 조치할 수 있도록 효율적인 화물관리시스템을 설계하고, 정확도 높은 화재 감지를 목적으로 데이터 학습을 위한 영상 및 전류 데이터 수집과 실제 컨테이너 스위치보드 및 리퍼컨테이너 레이아웃을 모사한 Testbed를 구축하였습니다.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.27-38
• /
• 2016

The paper reports the development of a distributed temperature sensing (DTS) system, which is a fire detection system using optical sensor linear detectors that depends on foreign and domestic technologies. This study accordingly analyzed the electrical signal patterns of Raman scattering light mainly used for temperature sensing among back-scattered light generated in optical fiber by using an oscilloscope. Through the measurement results, it could be verified that the Stokes signal patterns had little change by the temperature increase, but the temperature-sensitive anti-Stokes patterns had relative increase of the changes. This study developed a K-DTS system, which is an optical sensor linear fire detection system composed of an optical repeater and a receiver that can detect fires using Raman scattering light. It could be verified that the developed K-DTS system satisfied the type approval standards through the sensitivity tests using the rate of rise type and fixed temperature type sensitivity testers. In addition, performance experiments have been performed for performance evaluation of the K-DTS system developed in comparison with S-DTS system which has been imported from abroad and widely used in Korea. It can be confirmed from the results of the performance experiments using model tunnels that comparable performances can be obtained in fire detection locations and the measurements of fire temperatures.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.128-129
• /
• 2013

화재 현장에는 소방대원의 생명에 위협이 될 수 있는 다양한 연소가스가 발생하며, 소방대원의 안전에 다양한 연소가스의 농도를 실시간으로 측정하는 것은 매우 중요하다. 현재 무선통신 기술의 발달과 센서 기술의 발전으로 저전력, 소형의 센서를 이용하여 무선으로 화재현장의 온습도조건, 발생가스의 농도, 소방대원의 생체신호를 화재현장의 지휘센터로 보내주는 기술의 개발이 진행되고 있다. 이러한 추세에 맞추어 측정된 가스의 농도를 실시간으로 지휘센터로 송수신하는 기술의 연구가 활발히 진행 중이다. 본 연구는 화재환경에서 주로 발생되는 CO, NO2, NH3를 위주로한 고온의 환경에서 농도를 측정하기 위한 방법에 대한 연구이다.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.44-51
• /
• 2017

Accurate predictions of the activation time for smoke detectors using a fire simulation is are required to ensure the reliability of the RSET (Required Safe Egress Time) calculation in the process of PBD (Performance-Based Design). The objective of this study was to enhance the accuracy of input parameters for the numerical models of smoke detector based on the FDS. To this end, a Fire Detector Evaluator (FDE) developed in previous studies was improved. The uniformities of flow and smoke inside the FDE were improved and accurate measurements of the obscuration per meter (OPM) related to detector operation were also performed through a decrease in the forward scattering of smoke particles. The input parameters using the improved FDE showed a significant difference from the previous FDE quantitatively. In particular, a larger difference was found in a photoelectric detector compared to an ionization detector. Considering that the operating conditions of smoke detectors are affected by the detector type, combustibles, smoke particulars, and color, the database (DB) on the input parameters for various detectors and combustibles should be built to improve the reliability of PBD in future studies.