• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.347-352
• /
• 2015

Chemical properties such as heat of formation and density of methylnitroimidazole derivatives were predicted and analyzed by using density functional theory (DFT). Successive addition of energetic nitro groups into an imidazole ring increases both the heat of formation and the density. Using the chemical property values computed by DFT, explosive performance was analyzed with the Cheetah program, and compared with those of TNT, RDX, and HMX, which are currently used widely in military systems. When both C-J pressure and detonation velocity were used as explosive performance, methyldinitroimidazole derivatives show better performance than TNT, while methyltrinitroimidzole is almost close to RDX. Since methylnitroimidazole derivatives have a good merit, i.e. low melting point for melt loading, they are forecasted to be used widely in various military and civilian application.

• Explosives and Blasting
• /
• v.39 no.4
• /
• pp.12-21
• /
• 2021

In this study, a series of FEM numerical analyses was conducted to compare the resistance performance of concrete drainage protection facility to blast vibration. Two different types of ㅁ-shaped protection facility, which are suggested in the study, were compared to the traditional ㄷ-shaped one. In the analyses, the vibration resistances of the three protection facilities were evaluated under the varying conditions of the standoff distance from the explosion and charge weight per delay. As a result, it was found that the two proposed types of drainage protection facilities are superior to the traditional one in the vibration reduction performance.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.430-435
• /
• 2015

Two-dimensional analysis between the explosive performance and the impact sensitivity for methylnitroimidazole derivatives was performed to understand where these new energetic molecules could be utilized. The explosive performance was analyzed with the Cheetah program, while the impact sensitivity was predicted using neural network analysis. Successive nitration of methylimidazole made the molecule more sensitive, but methyltrinitroimidzole appeared to have a relatively good safety characteristic. We recently developed a novel method to analyze the potential usage of new energetic molecules using a two-dimensional chart, where the explosive performance and the impact sensitivity were located on the X-axis and Y-axis, respectively. An analysis of a two-dimensional plot between the performance and the sensitivity indicated that methyldinitroimidazole would be useful for insensitive explosive formulations, while methyltrinitroimidazole was forecasted for use as an ingredient for high explosive formulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.397-404
• /
• 2019

Linear Shaped Charge (LSC) that is widely used as separation system in aerospace system has to charge lots of explosives due to lack of uniformity. In addition, it is hard to optimize shape of liner and explosives because of manufacturing process. In order to overcome aforementioned drawbacks, Precision Linear Shaped Charge (PLSC) is currently under development. PLSC is made in two steps: prepare liner independently and charge explosive uniformly. In this study, PLSC is designed to have proper amount of explosives and penetration test of PLSC with different stand-off distance from liner to target is conducted to confirm penetration performance. Based on the penetration test results of PLSC, the numerical analysis method using AUTODYN is established and verified. Penetration mechanism and characteristics of PLSC is analyzed from the numerical and experimental results.

• Journal of the Korean Professional Engineers Association
• /
• v.12 no.1
• /
• pp.12-20
• /
• 1979

The early history of gun powder (black powder) and explosives was closely connected with the discovery of methods of preparing and purifing salpetre (potassium nitrate KNO$_3$). The Chineses apparently became acquainted with salpetre firstly on about 11th century, and they were possibly the original discoverers of salpetre for raw material of gun powder. The Egyptians called it “Chinese snow”, and it is significant that Chingis-Khan, the Mongol conqueror, took the Chinese eenginees with him in 1218 to use it for attacking the fortifications of the Persian cities. The black powder was invented by chance by Chinese alchemists during the Song dynasty (11th century) in the process of manufacturing medicine, and the powder was introduced to Europe by Mongol army. The manufacturing method of salpetre and gun powder was introduced to Korea from China in 1374, and the powder alld gunnery manufacturing project was developed by Mu Sun Choe(崔茂宣), the first Korean engineer late in Koryo dynasty. Coming in to Yi dynasty the explosive technic, extractive method of salpetre, and gunnery manufacturing process were developed greatly by Mu Sun Choe and Hai Sin Choe (崔海臣). However, confronting with the Japanes invasion at Imjin War (1597) with more powerful western style rifles which had been introduced from the Portuguese, on the contrary Korean army with the traditional guns couldn't compete with them. The Chochong(烏銃, the western rifle introduced in Japane) were much superior to the Chinese style traditional guns in the shooting power and striking efficiency. On the other hand, the Japanese battle ships armed only with the Chochong, when confronted with the Korean turtle shaped ships under the commanding of Admiral Yi Sun-Sin(李舞臣), were defeated by the Korean canons on the ships. The technical development of the modern powder industry in Korea. with the construction of four big explosive plants from 1930 to 1945, has resulted the mass-production of explosives. This study was purposed to investigate to the process with regard to the details of introduction to the explosive technology in Korea, and intended to give a help to the engineers who are engaged in study of the explosive technics by means of giving a spot light data on the early process of the designs, and making suggestion to the researchers for further study and invent a new and modern explosive.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.179-187
• /
• 2021

Army guns, swords, and explosives are substances that remain in danger and are expected to suffer significant damage in the event of an accident. Therefore, considerable attention is needed to handle them. Safety management of army guns, swords, and explosives can be classified into manufacturing, storage, and transportation, among which transportation is essential for performance tests and contract delivery. In 2020, the number of army guns, swords, and explosives transport increased by 30% compared to 2014, which can be seen as an increase in the demand for the transportation of army guns, swords, and explosives by defense companies due to defense improvement projects. Meanwhile, social interest in explosives safety management and social demands for strengthening safety management are increasing due to the explosions of explosive plants. Therefore, it is necessary to look at the status of safety management. This study examined the safety management for the transportation of army guns, swords, and explosives in the united states and domestic private sector. This paper presents improvements to safely and efficiently transport army guns, swords, and explosives.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.3-6
• /
• 2007

In this study, we described the Pyrovalve used in the propulsion system. It is very important to ensure its reliablity of operation because Pyrovalve is a pyrotechnic device for controlling fuel and air line of propulsion system. so we focused on improving operational reliability through several analyses and tests.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.1-14
• /
• 2022

To review the appropriateness of current regulations on the simple explosive storage facility, the effects of internal explosion on the structural stability of the standard storage facility were analyzed by means of both FEM analyses and field experiments. As a result, it was found that the explosion-proof performance of the existing storage structure was not sufficient for 15 kg of emulsion-type explosive. Thus, an alternative method of splitting explosives was tested by conducting sympathetic detonation experiments. This method worked properly as expected, and the proper amount of splitted explosive was determined according to the test results. In addition, a storage structure with open ceiling was found to be very effective because explosion pressure was released so rapidly that the damage of the facility could be reduced significantly. Hence, such a structural pattern was proposed as a new design scheme for simple explosive storage facility.

• Explosives and Blasting
• /
• v.23 no.3
• /
• pp.43-56
• /
• 2005

The defoliation velocity is tile rate of propagation of a detonation in an explosive. An explosive's velocity of defoliation(VOD) can be used to indicate a number of important characteristics regarding the product's performance under specific field and test conditions. Also, it is useful quality monitoring technique and call be measured accurately and easily at borehole and testing sites. This paper discusses the relevance of the detonation velocity of explosives in blasting. Attempts were made to classify detonation velocities and offer an interpretation of blasting process which will be useful to blasting engineers. But it was found that there is not necessarily a direct relationship between defoliation velocity and explosive quality or efficiency.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.10-18
• /
• 2016

Explosive blasting utilizes the energy produced from the explosion of explosive materials. Since the black powder, the first type of explosive, was invented, various types of explosives have been developed until a recent emulsion explosive which is powerful as well as safe in use. The detonators continue to be developed from safety fuse to the recent electronic detonators which allow extremely accurate and flexible control of delay time. However, the good explosives and detonators do not always lead to the good blast results. It entirely depends on the blast engineer. It is necessary to develop the empirical or theoretical models based on the field experience and sound theoretical algorithm. Such models would be very useful for blast design and, furthermore, provide the idea of further technical development. This paper introduces some models used in explosive blasting and attention to be paid for field application.